Avocado seeds are an agroindustrial residue widely produced in Mexico that are causing various environmental problems due to their accumulation. The evaluation of avocado residues to recover biopolymers by microwave-assisted extraction (MAE) and the characterization of avocado starch properties were studied in the present work. A central-composite design was used to optimize the MAE process. Moreover, a comparison was performed between MAE non-isothermal mode (NO–ISO) and conventional extraction. Starch optimization by MAE was obtained at 161.09 °C for 56.23 min with an extraction yield of 49.52% ± 0.69%, while with NO–ISO at 161 °C was obtained 45.75% ± 2.18%. Conventional extraction was 39.04% ± 2.22%. Compared with conventional starch, MAE starch showed similar proprieties and molecular spectra. In contrast, MAE starch showed high solubility, low water absorption capacity, a non-granular structure with small particle size (<2 µm) and polydispersity of fragments at different sizes of polymers. Therefore, MAE is a viable technology to extract the starch, and avocado seed can be considered an excellent starch source for the development of novel functional foods, contributing to promoting sustainability across the food chain.

Rambutan (Nephelium lappaceum L.) is a tropical fruit from Asia which has become the main target of many studies involving polyphenolic analysis. Mexico produces over 8 million tons per year of rambutan, generating a huge amount of agro-industrial waste since only the pulp is used and the peel, which comprises around 45% of the fruit’s weight, is left behind. This waste can later be used in the recovery of polyphenolic fractions. In this work, emerging technologies such as microwave, ultrasound, and the hybridization of both were tested in the extraction of phenolic compounds from Mexican rambutan peel. The results show that the hybrid technology extraction yielded the highest polyphenolic content (176.38 mg GAE/g of dry rambutan peel). The HPLC/MS/ESI analysis revealed three majoritarian compounds: geraniin, corilagin, and ellagic acid. These compounds explain the excellent results for the biological assays, namely antioxidant activity evaluated by the DPPH, ABTS, and LOI (Lipid oxidation inhibition) assays that exhibited great antioxidant capacity with IC₅₀ values of 0.098, 0.335, and 0.034 mg/mL respectively, as well as prebiotic activity demonstrated by a µMax (maximum growth) of 0.203 for Lactobacillus paracasei. Lastly, these compounds have shown no hemolytic activity, opening the door for the elaboration of different products in the food, cosmetic, and pharmaceutical industries.

Undoubtedly, the food industry is undergoing a dynamic process of transformation in its continual development in order to meet the requirements and solve the great problems represented by a constantly growing global population and food claimant in both quantity and quality. In this sense, it is necessary to evaluate the technological trends and advances that will change the landscape of the food processing industry, highlighting the latest requirements for equipment functionality. In particular, it is crucial to evaluate the influence of sustainable green biotechnology-based technologies to consolidate the food industry of the future, today, and it must be done by analyzing the mega-consumption trends that shape the future of industry, which range from local sourcing to on-the-go food, to an increase in organic foods and clean labels (understanding ingredients on food labels). While these things may seem alien to food manufacturing, they have a considerable influence on the way products are manufactured. This paper reviews in detail the conditions of the food industry, and particularly analyzes the application of emerging technologies in food preservation, extraction of bioactive compounds, bioengineering tools and other bio-based strategies for the development of the food industry. Graphical abstract

The rambutan peel (RP) is a relevant source of bioactive molecules, which could be used for application in cosmetics, food, and pharmaceutical areas. Total soluble polyphenol content was extracted from Mexican variety rambutan peels using an emergent ultrasound/microwave-assisted extraction (U/M-AE) technology. Five extractions were performed using different mass/volume and ethanol/water ratios; 1:16-0; 1:16-70; 1:8-0; 1:8-70; 1:12-30. Condition 1:16-0 was defined as the best extraction condition with 0% ethanol percentage (only water). The content of total soluble polyphenols was 307.57 mg/g. The total bound polyphenol content was 26.53 mg/g. Besides, two separation processes were made with the soluble fraction; the first one was performed using Amberlite XAD-16 (Sigma-Aldrich, Saint Louis, MO, USA), and seven polyphenolic compounds were obtained. The second one was performed using a preparative HPLC (Varian, Palo Alto, CA, USA) equipment obtained fraction where three compounds were obtained: geraniin (main compound), ellagic acid, and ellagic acid pentoside. The major compound isolated in the two separations was geraniin, according to HPLC/ESI/MS (High Performance Liquid Chromatography/ElectroSpray Ionization/Mass) analysis.

In Mexico, mistletoes have several applications in traditional medicine due to the great variety of compounds with biological activities that have not been characterized to date. The goals of the present study are to analyze the composition of minerals and phytochemical compounds in Mexican mistletoes Phoradendron bollanum and Viscum album subs. austriacum qualitatively and quantitatively, identify the compounds using HPLC-MS, and assess the antimicrobial potential in phytopathogenic microorganism control. Mineral content was evaluated with X-ray fluorescence. Three types of extracts were prepared: ethanol, water, and aqueous 150 mM sodium chloride solution. Characterization was carried out using qualitative tests for phytochemical compound groups, analytical methods for proteins, reducing sugars, total phenol, flavonoids quantification, and HPLC-MS for compound identification. The antimicrobial activity of mistletoe’s liquid extracts was evaluated by microplate assay. K and Ca minerals were observed in both mistletoes. A qualitative test demonstrated alkaloids, carbohydrates, saponins, flavonoids, tannins, and quinones. Ethanolic extract showed flavonoids, 3845 ± 69 and 3067 ± 17.2 mg QE/g for Phoradendron bollanum and Viscum album subs. austriacum, respectively, while aqueous extracts showed a total phenol content of 65 ± 6.9 and 90 ± 1.19 mg GAE/g Phoradendron bollanum and Viscum album subs. austriacum, respectively. HPLC-MS identified largely hydroxycinnamic acids and methoxycinnamic acids. Clavibacter michiganenses was successfully inhibited by aqueous extract of both mistletoes.

Tea (Camellia sinensis) is an evergreen shrub that is recognized worldwide for its functional properties. The current global production of green tea is approximately 5.3 million tons per year. Green tea processing has severely affected the generation of agro-industrial waste. One strategy for reducing waste accumulation is the revalorization of agro-industrial wastes via solid-state fermentation (SSF). The aim of this study was to valorize green tea processing residues to produce tannase under SSF using an endemic strain from Western Ghats, Aspergillus niger TBG 28A. SSF was performed in Erlenmeyer flasks with spent green tea leaves inoculated with spores of A. niger TBG 28A. Bioprocess optimization was carried out by employing the Box–Benkhen experimental design, achieving a high enzymatic yield of 246.82 (U/g). The present study shows the complexity of the degradation of tannins and the different patterns of expression of fungal tannase obtained from A. niger TBG 28 A. The enzyme was further purified to obtain a fold purification of 16.35% and a molecular mass of 150 kDa. Producing tannase with a novel strain of A. niger TBG 28A is an interesting strategy to revalorize green tea waste.