Yuji Hattori

Dr. Yuji Hattori

orcid

Research Focus & Metrics

Academic Career Length

25Years (2002-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
4 May 2017 in Physical Review Fluids
Verified
Journal Article
Closed access
PDF file
MGMasataka Gamahara
Masataka Gamahara
YHYuji Hattori
Yuji Hattori
An artificial neural network (ANN) is tested as a tool for finding a new subgrid model of the subgrid-scale (SGS) stress in large-eddy simulation. An ANN is used to establish a functional relation between the grid-scale flow field and the SGS stress without any assumption of the form of function. Data required for training and test of the ANN are provided by direct numerical simulation of a turbulent channel flow. It is shown that an ANN can establish a model similar to the gradient model. The correlation coefficients between the real SGS stress and the output of the ANN are comparable to or larger than similarity models, but smaller than a two-parameter dynamic mixed model. Large-eddy simulations using the trained ANN are also performed. Although ANN models show no advantage over the Smagorinsky model, the results confirm that the ANN is a promising tool for establishing a new subgrid model with further improvement.

5 December 2013 in Journal of Fluid Mechanics
Verified
Journal Article
Closed access
PDF file
YHYuji Hattori
Yuji Hattori
YFYasuhide Fukumoto
Yasuhide Fukumoto
The linear stability of a helical vortex tube with axial flow, which is a model of helical vortices emanating from rotating wings, is studied by modal stability analysis. At the leading order the base flow is set to the Rankine vortex with uniform velocity along the helical tube whose centreline is a helix of constant curvature and torsion. The helical vortex tube in an infinite domain, in which the free boundary condition is imposed at the surface of the tube, is our major target although the case of the rigid boundary condition is also considered in order to elucidate the effects of torsion and the combined effects of torsion and axial flow. The analysis is based on the linearized incompressible Euler equations expanded in $\epsilon $ which is the ratio of the core to curvature radius of the tube. The unstable growth rate can be evaluated using the leading-order neutral modes called the Kelvin waves with the expanded equations. At $O(\epsilon )$ the instability is a linear combination of the curvature instability due to the curvature of the tube and the precessional instability due to the axial flow, both parametric instabilities appearing at the same resonance condition. At the next order $O({\epsilon }^{2} )$ not only the effects of torsion but also the combined effects of torsion and axial flow appear, a fact which has been shown only for the short-wave limit. The maximum growth rate increases for the right-handed/left-handed helix with positive/negative helicity, in which the torsion makes the period of particle motion increase. All results converge to the previous local stability results in the short-wave limit. The differences between the two cases of different boundary conditions are due to the isolated mode of the free boundary case, whose dispersion curve depends strongly on the axial flow.

4 September 2019 in Journal of Fluid Mechanics
Verified
Journal Article
Closed access
PDF file
YHYuji Hattori
Yuji Hattori
FBFrancisco J. Blanco-Rodríguez
Francisco J. Blanco-Rodríguez
Stéphane Le DizèsStéphane Le Dizès
Stéphane Le Dizès
The linear instability of a vortex ring with swirl with Gaussian distributions of azimuthal vorticity and velocity in its core is studied by direct numerical simulation. The numerical study is carried out in two steps: first, an axisymmetric simulation of the Navier–Stokes equations is performed to obtain the quasi-steady state that forms a base flow; then, the equations are linearized around this base flow and integrated for a sufficiently long time to obtain the characteristics of the most unstable mode. It is shown that the vortex rings are subjected to curvature instability as predicted analytically by Blanco-Rodríguez & Le Dizès (J. Fluid Mech., vol. 814, 2017, pp. 397–415). Both the structure and the growth rate of the unstable modes obtained numerically are in good agreement with the analytical results. However, a small overestimation (e.g. 22 % for a curvature instability mode) by the theory of the numerical growth rate is found for some instability modes. This is most likely due to evaluation of the critical layer damping which is performed for the waves on axisymmetric line vortices in the analysis. The actual position of the critical layer is affected by deformation of the core due to the curvature effect; as a result, the damping rate changes since it is sensitive to the position of the critical layer. Competition between the curvature and elliptic instabilities is also investigated. Without swirl, only the elliptic instability is observed in agreement with previous numerical and experimental results. In the presence of swirl, sharp bands of both curvature and elliptic instabilities are obtained for $\unicode[STIX]{x1D700}=a/R=0.1$ , where $a$ is the vortex core radius and $R$ the ring radius, while the elliptic instability dominates for $\unicode[STIX]{x1D700}=0.18$ . New types of instability mode are also obtained: a special curvature mode composed of three waves is observed and spiral modes that do not seem to be related to any wave resonance. The curvature instability is also confirmed by direct numerical simulation of the full Navier–Stokes equations. Weakly nonlinear saturation and subsequent decay of the curvature instability are also observed.

26 October 2017 in Journal of Fluid Mechanics
Verified
Journal Article
Closed access
PDF file
YHYuji Hattori
Yuji Hattori
RKRyu Komatsu
Ryu Komatsu
The aeroacoustic sound generated in a flow past two cylinders, one of which is oscillating and the other is fixed, is studied by direct numerical simulation. This problem involves key ingredients of the aeroacoustic noise generated from wind turbines, helicopters, axial flow fans and other turbomachinery: flow, a moving body and a fixed body. The corrected volume penalization method is successfully applied to resolve the sound pressure of aeroacoustic waves as a solution of the compressible Navier–Stokes equations. The sound pressure was shown to be in good agreement with the prediction by the Ffowcs Williams–Hawkings aeroacoustic analogy, which takes account of the cylinder motion, confirming the accuracy of the corrected volume penalization method. Prior to the case of two cylinders, sound generation in flow past a single oscillating cylinder is considered. The fluid motion can be either periodic or non-periodic depending on the frequency and the amplitude of cylinder oscillation. The acoustic power is significantly reduced when the fluid motion locks in to a frequency lower than the natural frequency of vortex shedding from a fixed cylinder. When a fixed cylinder is added, the acoustic power depends strongly on the distance between the cylinders, since that determines whether synchronization occurs and the phase difference between the three forces: the lift forces exerted on the two cylinders and the inertial force due to volume displacement effect of the oscillating cylinder. In particular, significant sound reduction is observed when the fixed cylinder is placed upstream and the frequency of the cylinder oscillation is set to the frequency for which the acoustic power is minimized in the single-cylinder case.

1 August 2014 in Physics of Fluids
Verified
Journal Article
Closed access
DTDaiki Terakado
Daiki Terakado
YHYuji Hattori
Yuji Hattori
The statistical properties of the two-dimensional weakly compressible decaying turbulence are studied by direct numerical simulation. Particular attention is paid on the density distributions and their properties. It turned out that they depend strongly on the initial conditions of entropy and compressible component of the flow. In the non-uniform entropy case with an incompressible flow sheet structures, which are peaks and troughs in the density field, appear because of the filamentation of entropy. They do not appear in the uniform entropy case, however. As a result the power law of the density spectrum is different between the two cases. In the non-uniform entropy case the density spectrum scales as k−1, where k is the wavenumber, since density behaves as a passive scalar. In the uniform entropy case, on the other hand, it scales as k−5 as predicted for pressure in the two-dimensional incompressible turbulence since density fluctuation is approximately proportional to pressure fluctuation. When the initial velocity field has a compressible component, weak shocklets appear even for the low Mach number M0 = 0.1. The density spectrum scales as k−3 regardless of the initial conditions of entropy.

1 May 2012 in Physics of Fluids
Verified
Journal Article
Closed access
YHYuji Hattori
Yuji Hattori
YFY. Fukumoto
Y. Fukumoto
The effects of axial flow on the stability of a helical vortex tube are studied by short-wavelength stability analysis. By axial flow we mean the flow along the helical tube inside the vortex core. At the leading order the base flow is set to the Rankine vortex with uniform velocity along the helical tube. The exponential growth rate is obtained analytically as the magnitude of the sum of three O(ε) and five O(ε2) complex numbers, where ε is the ratio of the core to curvature radius. At O(ε) the effect of axial flow can be regarded as the effect of the Coriolis force; as a result the instability is the superposition of the curvature instability and the Coriolis or precessional instability since the two instabilities occur under the same resonance condition. At O(ε2) combined effects of the axial flow and the torsion appear; the maximum growth rate increases when the period of particle motion increases.