Wide-bandgap (WBG; >1.65 electron volts) perovskites based on iodine-bromine (I-Br) mixed halides are critical components of perovskite-based tandem solar cells (TSCs). However, the uncontrolled crystallization dynamics of Br-rich species lead to reduced grain sizes and high defect densities in WBG perovskite films. Herein, a multifunctional additive 3,4,5-trifluorobenzamide (TFBZ) was introduced to enhance the crystallinity and passivate defects of the methylammonium (MA)–free WBG perovskite films. The TFBZ demonstrates superior passivation capability compared to benzamide, effectively mitigating both iodine vacancies and undercoordinated Pb 2+ defects via fluorine-enhanced interactions. In addition, the fluorine substituents in TFBZ could form N–H···F hydrogen bonds with formamidinium iodide to retard the crystallization rate of the perovskite. This proposed method is effective in defect passivation and crystal growth modulation for both 1.67– and 1.79–electron volt MA-free WBG perovskites, enabling the fabrication of MA-free all-perovskite TSCs with an encouraging power conversion efficiency of 29.01% (certified at 28.52%).
Organic solar cells (OSCs) are one of the most promising photovoltaic technologies due to their affordability and adaptability. However, upscaling is a critical issue that hinders the commercialization of OSCs. A significant challenge is the lack of cost-effective and facile techniques to modulate the morphology of the active layers. The slow solvent evaporation leads to an unfavorable phase separation, thus resulting in a low power conversion efficiency (PCE) of organic solar modules. Here, a nitrogen-blowing assisted method is developed to fabricate a large-area organic solar module (active area = 12 cm2) utilizing high-boiling-point solvents, achieving a PCE of 15.6%. The device fabricated with a high-boiling-point solvent produces a more uniform and smoother large-area film, and the assistance of nitrogen-blowing accelerates solvent evaporation, resulting in an optimized morphology with proper phase separation and finer aggregates. Moreover, the device fabricated by the nitrogen-blowing assisted method exhibits improved exciton dissociation, balanced carrier mobility, and reduced charge recombination. This work proposes a universal and cost-effective technique for the fabrication of high-efficiency organic solar modules.
Conventional fabrication of high-efficiency organic solar cells (OSCs) predominantly relies on vacuum-evaporated metal top electrodes such as Ag and Al, which hinder large-scale industrial production. Gallium-based liquid metals (GaLMs), particularly the eutectic gallium–indium alloy (EGaIn), represent promising candidates to conventional vacuum-evaporated metal top electrodes due to their excellent printability and high electrical conductivity. In this study, we fabricated vacuum-free OSCs based on GaLM electrodes (Ga, EGaIn, and Galinstan) and analyzed the device performances. Rigid devices with EGaIn electrodes achieved a champion power conversion efficiency (PCE) of 15.6%. Remarkably, all-solution-processed ultrathin flexible devices employing silver nanowire (AgNW) bottom electrodes in combination with EGaIn top electrodes achieved a PCE of 13.8% while maintaining 83.4% of their initial performance after 100 compression–tension cycles (at 30% strain). This work highlights the potential of GaLMs as cost-effective, scalable, and high-performance top electrodes for next-generation flexible photovoltaic devices, paving the way for their industrial adoption.
Sequential deposition (SD) processing offers advantages for morphology optimization of active layer and device stability in organic solar cells (OSCs). However, the insufficient solvent resistance of polymer donor layers often leads to uncontrolled interfacial mixing. Herein, we report a dual-step solvent vapor annealing (D-SVA) strategy to address this limitation, without requiring thermal annealing, making it suitable for ultrathin flexible OSCs. Sequential chlorobenzene (CB) and carbon disulfide (CS2) vapor treatments enhance the molecular ordering and solvent resistance of the underlying donor layer, while reducing residual solvent and improving interfacial properties. As a result, the rigid SD processed OSCs achieve a power conversion efficiency (PCE) of 19.3%. Moreover, ultrathin flexible devices deliver a PCE of 17.3% with good mechanical stability. This work provides a general and scalable pathway toward high-performance and stable SD organic solar cells.