The redshifted 21cm line of neutral hydrogen (Hi), potentially observable at low radio frequencies (~50–200 MHz), should be a powerful probe of the physical conditions of the inter-galactic medium during Cosmic Dawn and the Epoch of Reionisation (EoR). The sky-averaged Hi signal is expected to be extremely weak (~100 mK) in comparison to the foreground of up to 10⁴ K at the lowest frequencies of interest. The detection of such a weak signal requires an extremely stable, well characterised system and a good understanding of the foregrounds. Development of a nearly perfectly (~mK accuracy) calibrated total power radiometer system is essential for this type of experiment. We present the BIGHORNS (Broadband Instrument for Global HydrOgen ReioNisation Signal) experiment which was designed and built to detect the sky-averaged Hi signal from the EoR at low radio frequencies. The BIGHORNS system is a mobile total power radiometer, which can be deployed in any remote location in order to collect radio frequency interference (RFI) free data. The system was deployed in remote, radio quiet locations in Western Australia and low RFI sky data have been collected. We present a description of the system, its characteristics, details of data analysis, and calibration. We have identified multiple challenges to achieving the required measurement precision, which triggered two major improvements for the future system.

The benefit of low loss exhibited in utilizing MEMS variable capacitors in a reconfigurable reflectarray is undermined by the inconsistency of the fabricated devices. A digitally controlled reflectarray with MEMS capacitive switches is proposed. This paper aims to determine an appropriate number of phase shifting bits for such implementation. Using array theory, the influence of the number of bits on the beam pointing performance is evaluated. A common feed horn is used to illuminate the reflectarrays. In addition, broadside plane wave illumination is also considered for comparison with existing works in phased arrays. Though at certain scan angles the results are different from those for traditional phased arrays, in general the results are found to be similar. This information lays the groundwork for designing a cost-effective digital MEMS reflectarray cell.

The Murchison Widefield Array (MWA), located in Western Australia, is one of the low-frequency precursors of the international Square Kilometre Array (SKA) project. In addition to pursuing its own ambitious science programme, it is also a testbed for wide range of future SKA activities ranging from hardware, software to data analysis. The key science programmes for the MWA and SKA require very high dynamic ranges, which challenges calibration and imaging systems. Correct calibration of the instrument and accurate measurements of source flux densities and polarisations require precise characterisation of the telescope’s primary beam. Recent results from the MWA GaLactic Extragalactic All-sky Murchison Widefield Array (GLEAM) survey show that the previously implemented Average Embedded Element (AEE) model still leaves residual polarisations errors of up to 10–20% in Stokes Q. We present a new simulation-based Full Embedded Element (FEE) model which is the most rigorous realisation yet of the MWA’s primary beam model. It enables efficient calculation of the MWA beam response in arbitrary directions without necessity of spatial interpolation. In the new model, every dipole in the MWA tile (4 × 4 bow-tie dipoles) is simulated separately, taking into account all mutual coupling, ground screen, and soil effects, and therefore accounts for the different properties of the individual dipoles within a tile. We have applied the FEE beam model to GLEAM observations at 200–231 MHz and used false Stokes parameter leakage as a metric to compare the models. We have determined that the FEE model reduced the magnitude and declination-dependent behaviour of false polarisation in Stokes Q and V while retaining low levels of false polarisation in Stokes U.

This paper offers an electromagnetic, more specifically array theory, perspective on understanding strong instrumental polarization effects for planar low-frequency “aperture arrays” with the Murchison Widefield Array (MWA) as an example. A long-standing issue that has been seen here is significant instrumental Stokes leakage after calibration, particularly in Stokes Q at high frequencies. A simple model that accounts for interelement mutual coupling is presented which explains the prominence of Q leakage seen when the array is scanned away from zenith in the principal planes. On these planes, the model predicts current imbalance in the X (E-W) and Y (N-S) dipoles and hence the Q leakage. Although helpful in concept, we find that this model is inadequate to explain the full details of the observation data. This finding motivates further experimentation with more rigorous models that account for both mutual coupling and embedded element patterns. Two more rigorous models are discussed: the “full” and “average” embedded element patterns. The viability of the full model is demonstrated by simulating current MWA practice of using a Hertzian dipole model as a Jones matrix estimate. We find that these results replicate the observed Q leakage to approximately 2 to 5%. Finally, we offer more direct indication for the level of improvement expected from upgrading the Jones matrix estimate with more rigorous models. Using the average embedded pattern as an estimate for the full model, we find that Q leakage of a few percent is achievable.

We report characterization results for an engineering prototype of a next-generation low-frequency radio astronomy array. This prototype, which we refer to as the Aperture Array Verification System 0.5 (AAVS0.5), is a sparse pseudorandom array of 16 log-periodic antennas designed for 70-450 MHz. It is colocated with the Murchison widefield array (MWA) at the Murchison radioastronomy observatory (MRO) near the Australian square kilometre array (SKA) core site. We characterize the AAVS0.5 using two methods: in situ radio interferometry with astronomical sources and an engineering approach based on detailed full-wave simulation. In situ measurement of the small prototype array is challenging due to the dominance of the Galactic noise and the relatively weaker calibration sources easily accessible in the southern sky. The MWA, with its 128 “tiles” and up to 3 km baselines, enabled in situ measurement via radio interferometry. We present array sensitivity and beam pattern characterization results and compare to detailed full-wave simulation. We discuss areas where differences between the two methods exist and offer possibilities for improvement. Our work demonstrates the value of the dual astronomy-simulation approach in upcoming SKA design work.

This article presents an overview of the radiation from fast and slow traveling waves. The goal is to describe the mechanisms that give rise to the radiation in a leaky-wave antenna (LWA). An infinite aperture distribution and line-source assumptions will be used to convey the concepts. In addition, the relationship between the leaky-wave antenna and other types of traveling wave antennas will be elucidated.