In response to the issue of low positioning accuracy and insufficient robustness in small UAVs (unmanned aerial vehicle) caused by sensor noise and cumulative motion errors during flight in complex environments, this paper proposes a multisource, multimodal data fusion method. Initially, it employs a multimodal data fusion of various sensors, including GPS (global positioning system), an IMU (inertial measurement unit), and visual sensors, to complement the strengths and weaknesses of each hardware component, thereby mitigating motion errors to enhance accuracy. To mitigate the impact of sudden changes in sensor data, a high-fidelity UAV model is established in the digital twin based on the real UAV parameters, providing a robust reference for data fusion. By utilizing the extended Kalman filter algorithm, it fuses data from both the real UAV and its digital twin, and the filtered positional information is fed back into the control system of the real UAV. This enables the real-time correction of UAV positional deviations caused by sensor noise and environmental disturbances. The multisource, multimodal fusion Kalman filter method proposed in this paper significantly improves the positioning accuracy of UAVs in complex scenarios and the overall stability of the system. This method holds significant value in maintaining high-precision positioning in variable environments and has important practical implications for enhancing UAV navigation and application efficiency.
Unmanned surface vehicles (USVs) face significant challenges in long-term operations in complex and dynamic marine environments. These include abnormal attitudes, low accuracy in navigation attitude prediction, and difficulties in maintaining operational stability and equipment safety. To address these issues, this paper proposed a USV navigation attitude prediction method that integrates Unscented Kalman Filtering (UKF) with a digital twin model. First, a three-degree-of-freedom mathematical model is constructed based on the motion characteristics of the USV to establish an initial digital twin model. Then, the UKF algorithm is improved with a dynamic sliding window approach and integrated with real vessel experimental data to achieve dynamic model parameter updates, further enhancing prediction accuracy. The updated twin model is subsequently used for USV navigation attitude prediction. Experimental results demonstrate that this method significantly improves prediction accuracy and robustness, even under complex sea conditions and sensor data loss, providing crucial support for the safety and reliability of USV autonomous navigation.
In response to the issues of sensor noise and accumulated motion errors that lead to low positioning accuracy and insufficient robustness during large maneuvers or continuous flight of small unmanned aerial vehicles (UAVs) in complex environments, this paper proposes a multi-source and multimodal data fusion method. Initially, it employs a multimodal data fusion of various sensors including GPS (Global Positioning System), IMU (Inertial Measurement Unit), and visual sensors to complement the strengths and weaknesses of each hardware component, thereby eliminating motion errors to enhance accuracy. To mitigate the impact of sudden changes in sensor data, the method introduces a digital twin UAV data source. By utilizing the Extended Kalman Filter algorithm, it fuses data from both the real UAV and its digital twin, and the filtered positional information is fed back into the control system of the real UAV. This enables real-time correction of UAV positional deviations caused by sensor noise and environmental disturbances. The multi-source multimodal fusion Kalman filter method proposed in this paper significantly improves the positioning accuracy of UAVs in complex scenarios and the overall stability of the system. This method holds significant value in maintaining high-precision positioning in variable environments and has important practical implications for enhancing UAV navigation and application efficiency.