In this paper, a new moving target detection algorithm for single channel circular Synthetic Aperture Radar (SAR) is presented. Circular SAR can perform observation with circular trajectory and retrieve multiaspect information. Due to the circular trajectory, the moving target has long and complex apparent trace (smear trajectory), while the background (clutter) has relatively slow changing characteristic in limited azimuth integration. Thus, the background image can be filtered by using radiometric adjusted overlap subaperture images. Then, the Signal-to-Clutter Ratio (SCR) of the region where the strong backscattering clutter exists is enhanced with logarithm background subtraction technique. In the real data experiment, the maximum SCR improvement is 13 dB. Finally, the moving target can be detected using a Constant False Alarm (CFAR) detector. The algorithm is evaluated with one channel data of three channel GOTCHA-GMTI dataset.
In conventional synthetic aperture radar (SAR), sensors with a fixed look angle are assumed, and the scattering properties are considered as invariant in the azimuth. In some new SAR modes such as wide-angle SAR and circular SAR (CSAR), the azimuthal angle of view is much larger. Anisotropic targets which have different physical shapes from different angles of view are difficult to interpret in the traditional observation model if variations remain unconsidered. Meanwhile, SAR polarimetry is a powerful tool to analyze and interpret targets’ scattering properties. Anisotropic targets can be precisely described with polarimetric signatures from different angles of view. In this paper, polarimetric data is separated into sub-apertures to provide polarimetric properties from different angles of view. A multi-aperture observation model which contains full polarimetric information from all angles of view is then established. Based on the multi-aperture observation model, multi-aperture polarimetric entropy (MAPE) is defined and is suggested as an extension of polarimetric entropy in multi-aperture situations. MAPE describes both targets’ polarimetric properties and variations across sub-apertures. Variations across the azimuth are analyzed and anisotropic and isotropic targets are identified by MAPE. MAPE can be used in many polarimetric wide angle and CSAR applications. Potential applications in target discrimination and classification are discussed. The effectiveness and advantages of MAPE are demonstrated with polarimetric CSAR data acquired from the Institute of Electronics, Chinese Academy of Sciences airborne CSAR system at P-band.
In conventional polarimetric synthetic aperture radar, targets are usually assumed isotropic, and potential polarimetric variations in azimuth are ignored. As to polarimetric circular SAR (CSAR), the azimuthal aperture is much larger, and polarimetric variations in azimuth are no longer negligible. Moreover, whether a target has changed polarimetric properties in azimuth, i.e., anisotropic, is an important feature. H/α classification scheme is a famous and effective unsupervised classification method. However, when applying H/α classification scheme against polarimetric CSAR data, problems occur. First, during the formation of a large aperture, polarimetric properties from different angles of view are combined, which affects the estimation of H and α. Second, H/α method cannot distinguish anisotropic and isotropic targets. In this paper, a pixel-wise H/α calculation method and an unsupervised classification scheme against polarimetric CSAR images are proposed to solve the two problems. With the pixel-wise H/α calculation method, H and α are more accurately calculated. Meanwhile, anisotropic and isotropic targets which have same scattering mechanism can be distinguished by the proposed classification method. The effectiveness of the pixel-wise H/α calculation method is demonstrated by both the simulated and real data. The unsupervised classification method is demonstrated based on real data, acquired by airborne CSAR system at P-band, the Institute of Electronics, Chinese Academy of Sciences, Beijing, China.
Multi-aspect PolSAR data contains polarimetric properties from different look angle. Multi-aspect polarimetric information can be applied in geometric measurement, target identifying, precise classification. In order to characterize anisotropic target, anisotropic and isotropic scattering need to be separated from the raw data. A detecting-removing-incoherent-adding (DRIA) framework, presented in Li Yang's doctoral dissertation, suggests to remove the anisotropic scattering, gain a removal series and incoherent integrate the reserved data. In this paper, in order to identify anisotropic target, an anisotropic scattering model is raised. An improved detection and feature retrieval method is presented base on DRIA framework. The equivalent number of looks (ENL) used in Li Yang's dissertation is proved to bring measurement error to the result. The anisotropic scattering can be correctly identified after the error is restored. Two kinds of maximum-likelihood ratio are proved to gain the same result in sort. Three features are retrieved from the removal series to describe the anisotropic scattering. The experimental data is circular SAR (CSAR) data acquired by the Institute of Electronics airborne CSAR system at P-band.