Introduction: With the gradual reduction in conventional exploration and the gradual improvement of hydraulic fracturing technology, the exploration of tight oil and gas has gradually become general. Marine carbonate rocks are developed in the lower Paleozoic Ordovician in the eastern margin of Ordos Basin. According to the drilling results, the minerals in this area are mainly calcite and dolomite, and the secondary minerals are halite, anhydrite, quartz, feldspar and clay minerals. Core experiment reveals that the reservoir is tight, with porosity between 2 and 6% and permeability less than 2mD. Relationship between lithology and porosity established by conventional logging interpretation is not consistent with the results of gas logging, so it is impossible to accurately determine the reservoir location.Method: The research in this paper is to interpret lithologic profile based on mineral X-ray diffraction data, to accurately evaluate pore type and permeability based on borehole electrical imaging and multipole array acoustic logging, and to interpret gas saturation by using the Archie formula with variable cementation index.Results and discussion: This method improves the interpretation accuracy of geophysical logging methods for tight reservoirs in this block, and plays a key role in favorable evaluation of reservoir sweet spots.
Fracture systems critically govern coal seam permeability, influencing hydrocarbon migration pathways and well placement strategies. We established a predictive framework for fracture characterization in thin-interbedded coal reservoirs by integrating seismic response analysis with multi-domain validation. Utilizing borehole log statistics and staggered-grid wave equation modeling, we first decode azimuthal amplitude anisotropy patterns in fractured coal seams under varying lithological contexts. Key findings reveal that (1) isotropic thick surrounding rocks yield distinct fracture symmetry axis alignment (ellipse long-axis orientation shifts with layer velocity), while (2) anisotropic thin-interbedded host strata amplify azimuthal anisotropy ratios at mid–far offsets but induce prediction ambiguity under comparable fracture intensities. By applying azimuthally partitioned OVT data with optimized mid–long offset stacking, our amplitude ellipse fitting method demonstrates unique fracture solutions validated against structural, logging, and production data. This workflow resolves the multi-solution challenges in thin-layered systems, enabling precise fracture parameter prediction to optimize coalbed methane development in geologically complex basins.
Deep-water gravity-flow depositional systems are characterized by intricate internal architectural configurations and pronounced heterogeneity. Traditional outcrop studies rely heavily on qualitative observations and often fail to capture the sub-seismic 3D spatial heterogeneity required for precise hydrocarbon exploration. This study leverages an integrated multi-geophysical framework to achieve a high-resolution, quantitative characterization of internal structures within gravity-flow fan units in field outcrops. Focusing on the Upper Ordovician Lashizhong Formation at the Beishan outcrop in Wuhai, northwestern Ordos Basin, the research integrates Terrestrial Laser Scanning (LiDAR) to construct a 3D topographic framework and uses Ground-Penetrating Radar (GPR) to probe subsurface architecture. Furthermore, Full-Waveform Inversion (FWI) is employed for the high-resolution reconstruction of relative permittivity, culminating in the generation of a 3D geological model via Sequential Gaussian Simulation (SGS). Six primary lithofacies were identified: (1) massive-to-graded medium-to-fine-grained sandstone, (2) graded fine- to silty sandstone, (3) parallel-laminated fine sandstone, (4) climbing ripple-laminated siltstone, (5) wave ripple-laminated siltstone, and (6) horizontally bedded mudstone. Geometrically, six channel–levee architectural stages and one sheet-lobe stage within a mid-fan setting. Quantitative analysis shows that channel axes maintain a high net-to-gross (N/G) ratio of 0.82 with 92% connectivity, whereas levee and lobe margins exhibit a significantly reduced N/G of 0.28 and 42% connectivity. The overall cross-validation accuracy of the 3D model reached 86.4%. This research provides an objective, quantitative technical framework for 3D spatial characterization and reservoir modeling of complex gravity-flow systems.