To protect electronic systems against high-power microwave (HPM), a plasma waveguide limiter is presented. In response to the above phenomenon, a self-consistent 3-D multiphysics electromagnetic-plasma fluid model coupling full-wave Maxwell’s equations with plasma fluid equations is established to describe the operating mechanism of a 3-D simplified sandwich structure plasma limiter filled with four easily ionized inert gases. The plasma limiter system is analyzed with the spectral-element time-domain (SETD) method. The choice of filling easily ionizable inert gas, influence of the number of layers, and pressure on the plasma limiter are discussed. Numerical results demonstrate that the gas with low critical breakdown field strength is more suitable for protecting HPMs. In the case of 20 torr, the order of microwave breakdown is xenon, argon, neon, and helium, and the two-layer plasma limiter (plasma–slab–plasma) has better protective characteristics than a one-layer plasma limiter (slab–plasma–slab) with the same length of gas chamber. Our research can provide theoretical guidance for designers and give the complete physical physics process.
17 October 2023 in IEEE Transactions on Antennas and Propagation
This article concerns about the propagation properties of GHz electromagnetic (EM) waves in a plasma-filled rectangular waveguide. To describe this complex issue, a three-dimensional (3D) dynamic Drude model is developed and solved by the spectral-element time-domain (SETD) method. The distinctions between the dynamic Drude model and traditional static Drude model are discussed theoretically. In the SETD process, Galerkin’s method is used for space discretization and central difference scheme is employed for temporal discretization. Dynamic Drude model comprehensively takes into account motion state of electrons in plasma driven by electromagnetic fields under the action of GHz electromagnetic wave and external constant magnetic field. Numerical results from dynamic and static Drude models are in good agreement under the action of low-power microwaves and low dc magnetic fields. Under the incidence of high-power microwave (HPM) pulses, electrons gradually accumulate near the source end, affecting the propagation of electromagnetic waves. This study provides a theoretical foundation for a comprehensive exploration of propagation properties of electromagnetic waves in plasma.
A three-dimensional (3D) multi-physics model is developed to describe the characteristics of light emitted from high power microwave nitrogen breakdown. This model consists of electromagnetic (EM) fields and plasma physics in which plasma physics and EM fields are controlled by plasma fluid equations and Maxwell's equations. A continuity equation of excited molecule (ion) is introduced into the fluid model to describe the light brightness produced in the breakdown system. The resulting multi-physics system is analyzed and described with the spectral-element time-domain method. The external dc magnetic field applied in breakdown volume is used to prolong the breakdown time. The light brightness is weakened by the dc magnetic field before the occurrence of breakdown, and the variation in light brightness with different wavelengths produced by breakdown is discussed. The position of the maximum light brightness spot can be changed by the influence of the dc magnetic field on the electron concentration. Our research provides theoretical guidance for further understanding the physical process and physical phenomena in microwave nitrogen breakdown.
3 February 2022 in IEEE Transactions on Plasma Science
Dynamic characteristics of streamer discharge in a parallel-plane electrode system are described within the framework of a drift-diffusion model coupled with Poisson’s equation at atmospheric pressure. The spectral-element time-domain (SETD) method is applied to the solution of streamer discharge problems, and the flux-corrected-transport (FCT) algorithm is also applied to suppress possible numerical divergence or numerical oscillation. The performance of the proposed method is examined in a number of numerical tests. Then the tempo-spatial evolutions of the streamer are obtained in detail under the different situations. Numerical results show that after the initial stage of adjustment, the streamers propagate in a steady-state mode, where the characteristics of the steady state are decided by background ionization frequency which is determined by pressure and background electric field together. And space charge effect is a dominant factor for the distortion of spatial electric field, making the discharge channel expand toward both electrodes faster. These works presented here are instructive for high-voltage insulating device protection and plasma application.
Based on the enormous application potential of GaN-based high electron mobility transistors (HEMT) in high-frequency and high-power scenarios, this article focuses mainly on the study of the Gunn oscillation effect of GaN-based HEMT devices. From the perspective of electric field regulation, a sandwich structure GaN HEMT device model with field plate structure is proposed, and a hydrodynamic physical model is established. The negative resistance characteristics in the GaN HEMT are obtained by the finite element method and the influence of the gate field plate on the Gunn oscillation frequency in the device channel is studied. The numerical simulation results show that the suitable field plate structure can modulate the distribution of the channel electric field below the gate, promote the electric field to enter the negative differential mobility region, undergo valley to valley electron transfer, form electron domains, and generate the Gunn oscillation currents in the terahertz band. Meanwhile, the length of the field plate regulates the oscillation current frequency of the device, and the stable and usable terahertz frequency band signal can be realized. This research opens up the possibility for semiconductor solid-state devices to realize terahertz frequency band radiation, and provides the basis for realizing new breakthroughs in HEMT for terahertz applications.
In this paper, the multi-carrier microwave breakdown in air-SF6 mixtures is analyzed with the spectral-element time-domain method. In this process, a three-dimensional multi-physics model coupling Maxwell's equations with electron fluid equations is established. The tail-erosion and frequency shift phenomenon caused by multi-carrier microwave breakdown in different proportions of air-SF6 mixtures can be observed. Numerical results demonstrate that multi-carriers will make the wireless communication system sensitive to microwave breakdown. On the other hand, the different proportions of air-SF6 mixtures can obviously improve the breakdown threshold to inhibit the multi-carrier microwave breakdown, which is favorable to the propagation of multi-carrier microwaves in air. Meanwhile, increasing the pressure can suppress the frequency shift phenomenon, and the proportion of different SF6 in the mixed gas has little effect on the frequency shift of the transmitted wave. Our research provides theoretical guidance for comprehensively exploring the characteristics and physical mechanism of multi-carrier microwave breakdown in air-SF6 mixtures and is helpful for protection of microwave devices and plasma application.