We study the carrier dynamics for c-plane InGaN/GaN light-emitting diodes (LEDs) with various emission wavelengths near the green gap using a small-signal electroluminescence method. The LEDs were grown by Lumileds using state-of-the-art growth conditions. Radiative and non-radiative recombination rates are numerically separated, and the carrier recombination lifetime and carrier density are obtained. Experiment shows that the causes of efficiency reduction at longer wavelength in the present structures are injection efficiency decrease, radiative recombination rate decrease, and imbalance of the increase in Auger–Meitner and radiative terms due to the interplay between the carrier–current density relationship and the quantum-confined Stark effect (QCSE). The effects of QCSE, phase-space filling, and the carrier–current density relationship on efficiency reduction at longer wavelengths are examined separately with experimental data and Schrödinger–Poisson calculations. In addition, we confirm the scaling law between Cn and Bn under electrical injection and find that the increase in carrier density at a given current density is the primary cause for lower radiative efficiency at high current density in longer wavelength LEDs. Conversely, we do not observe a significant efficiency reduction at longer wavelengths from extrinsic material degradation.
We study the impact of deep-level defects on trap-assisted Auger–Meitner recombination in c-plane InGaN/GaN LEDs using a small-signal electroluminescence (SSEL) method and deep-level optical spectroscopy (DLOS). Carrier dynamics information, including carrier lifetime, recombination rate, and carrier density, is obtained from SSEL, while DLOS is used to obtain the deep-level defect density. Through fitting the nonradiative recombination rates of wafers with different deep-level defect densities, we obtain the Shockley–Read–Hall (SRH) and trap-assisted Auger–Meitner recombination (TAAR) coefficients. We show that defect-related nonradiative recombination, including both SRH and TAAR, accounts for a relatively small fraction of the total nonradiative recombination, which is dominated by intrinsic Auger–Meitner recombination. The interplay between carrier localization and Coulomb enhancement has a different impact on radiative and intrinsic Auger–Meitner recombination. Evidence is presented that the imbalance between the change of radiative and intrinsic Auger–Meitner recombination is the primary cause of the efficiency droop at high carrier densities in the samples studied.
15 March 2018 in Journal of Physics D: Applied Physics
In this paper, asymmetric transmission with extremely high contrast for linear polarization is proposed in chiral split ring resonators. Results show that only specific cross-polarization can pass through the structure with a high power transmission efficiency of 0.9 (amplitude transmission 0.95), which is much higher than those reported before in infrared region. The contrast between the two cross-polarizations is also very large (larger than 24.5 dB). Another merit of our scheme is that the operation wavelength is broadband, and can shift linearly to achieve asymmetric transmission over a range of 330 nm by the tuning of a single structural parameter. These excellent features of asymmetric transmission make our scheme very promising in practical applications, such as integrated optical diodes.
We introduce a multiple-carrier-lifetime model (MCLM) for light-emitting diodes (LEDs) with non-uniform carrier distribution, such as in multiple-quantum-well (MQW) structures. By employing the MCLM, we successfully explain the modulation response of V-pit engineered MQW LEDs, which exhibit an S21 roll-off slower than −20 dB/decade. Using the proposed model and employing a gradient descent method, we extract effective recombination and escape lifetimes by averaging the carrier behavior across the quantum wells. Our results reveal slower effective carrier recombination and escape in MQW LEDs compared with LEDs emitting from a single QW, indicating the advantages of lower carrier density achieved through V-pit engineering. Notably, the effective carrier recombination time is more than one order of magnitude lower than the effective escape lifetime, suggesting that most carriers in the quantum wells recombine, while the escape process remains weak. To ensure the reliability and robustness of the MCLM, we subject it to a comprehensive threefold validation process. This work confirms the positive impact of spreading carriers into several quantum wells through V-pit engineering. In addition, the MCLM is applicable to other LEDs with a non-uniform carrier distribution, such as micro-LEDs with significant surface recombination and non-uniform lateral carrier profiles.
We investigate the impact of quantum well (QW) thickness on efficiency loss in c-plane InGaN/GaN LEDs using a small-signal electroluminescence technique. Multiple mechanisms related to efficiency loss are independently examined, including injection efficiency, carrier density vs current density relationship, phase space filling, quantum-confined Stark effect, and Coulomb enhancement. An optimal QW thickness of around 2.7 nm in these InGaN/GaN LEDs was determined for QWs having constant In composition. Despite improved control of deep-level defects and lower carrier density at a given current density, LEDs with thin QWs still suffer from an imbalance in enhancement effects on the radiative and intrinsic Auger–Meitner recombination coefficients. The imbalance in enhancement effects results in a decline in internal quantum efficiency and radiative efficiency with decreasing QW thickness at low current density in LEDs with QW thicknesses below 2.7 nm. We also investigate how LED modulation bandwidth varies with QW thickness, identifying the key trends and their implications for device performance.
Nonlinear photonic platforms underpin applications ranging from spectroscopy to quantum communication, yet often face trade-offs between efficiency, loss, and scalability. An emerging platform, thin-film InGaP-on-insulator, combines high χ(2) nonlinearity with wafer-scale fabrication. Here, we demonstrate second-harmonic generation pumped at 1550 nm with a normalized efficiency of 50±1W −1 in a single-pass III–V waveguide and up to 51±10mW of generated signal power. Conversely, devices enable high-brightness generation of time-energy entangled photon pairs with a per-bandwidth generation rate of 7.5GHz/(mW⋅THz). Using InGaP grown via molecular beam epitaxy (MBE), we show losses below 1 dB/cm at 1550 nm and stable phase matching across fabrication runs. An absolute measurement of the nonlinear response yields d14 =106±4pm/V for InGaP grown via both MBE and metalorganic chemical vapor deposition. These results demonstrate the scalability and efficiency of InGaP-on-insulator for entangled photon-pair sources and nonlinear photonic systems such as mid-infrared frequency conversion.