The effect of hydrophilic chain of surfactants fatty alcohol polyoxyethylene ether sodium sulphates (AEnS, n = 2, 3, 7) on surface properties and wetting properties was investigated by the measurement of equilibrium surface tension, dynamic surface tension and dynamic contact angle. The fatty alcohol polyoxyethylene ether sodium sulphates with different head group sizes were used. From the results of equilibrium surface tension measurements, we could obtain the critical micellisation concentration, adsorption efficiency, maximum surface excess concentration and Langmuir equilibrium adsorption constant at air/liquid interface. The dynamic surface tension results showed that the adsorption of aqueous solutions at the air/liquid interface follows a mixed-diffusion kinetic adsorption mechanism. In conclusion, for both studied surfactant, the longer the oxyethylene chains, the higher the maximum rate of surface tension reduction, the higher the diffusivity and wetting properties in terms of contact angle.
24 February 2022 in Colloids and Surfaces A: Physicochemical and Engineering Aspects
The equilibrium and dynamic surface properties of anionic surfactant alcohol ether sulfate with different EO distribution(C-AE2S and N-AE2S) and cationic surfactant tetradecyltrimethylammonium bromide (TTAB) mixtures under different molar ratios were investigated. Their surface activities, adsorption, and spreading performances were investigated by static/dynamic surface tension measurements, molecular dynamics simulation, and dynamic contact angle techniques at 298 K. The static surface tension analysis reveals that the critical micellization concentration (cmc) values and the surface tension at cmc (γcmc) of the binary systems are much lower than that of the individual component. Compared with C-AE2S/TTAB, N-AE2S/TTAB systems have higher cmc and lower γcmc. It was found from the molecular dynamics simulation that negative charges of C-AE2S were drastically neutralized by the positively-charged TTAB at the interface in the system of C-AE2S/TTAB. The dynamic surface tension results indicate that the adsorption process of aqueous solutions for both C-AE2S/TTAB and N-AE2S/TTAB are mixed diffusion-kinetic adsorption mechanisms. From the dynamic contact angle measurements, it could be obtained that the mixtures exhibit better spreading behavior than that of the individual component and N-AE2S/TTAB systems have lower contact angles than that of C-AE2S/TTAB at the same mixing ratios. Graphical Abstract
6 February 2017 in Journal of Dispersion Science and Technology
Sodium succinate sulfate (MAPEG1500-OSO3Na) was prepared using maleic anhydride (MA) and polyethylene glycols (PEG1500) as raw materials. The structure was characterized by Fourier transform infrared spectrometry (FTIR) and 1H-nuclear magnetic resonance (1H NMR). Its physicochemical properties, such as surface activity, adsorption behavior, spreading performance, and rheological property, were investigated by static/dynamic surface tension (DST) measurements, contact angle techniques, and rheological techniques at 25°C. Surface tension measurement for this surfactant is about 17 mN/m. The DST results indicated that the adsorption process is mixed diffusion-kinetic adsorption mechanism. The spreading measurement demonstrated that MAPEG1500-OSO3Na possessed an excellent spreading ability. Besides, the dispersion performances of MAPEG1500-OSO3Na on barium sulfate (BaSO4) particles under different conditions have been studied by the weighing method and transmission electron microscope (TEM). These results showed that there exist optimum pH value and added amount of MAPEG1500-OSO3Na corresponding to the highest dispersion rate.
An oleyl alcohol-based extended surfactant, sodium oleyl polyethylene oxide-polypropylene oxide sulfate (OE3P3S), was synthesized and identified using FT-IR and 1H NMR. The adsorption and aggregation behaviors of OE3P3S and its mixture with cationic surfactant alkyltrimethylammoniumbromide (ATAB) were investigated under different molar ratios. The static surface tension analysis indicated that the critical micellization concentration (cmc) and the critical surface tension (γcmc) of OE3P3S were 0.72 mmol/L, and 36.16 mN/m, respectively. The cmc and γcmc values of the binary system were much lower than that of the individual component. And the cmc values of OE3P3S/ATAB = 6:4 mixtures decreased with an increase in the chain length of the cationic surfactant in the binary system. It was found from the dynamic surface tension that there was a slower diffusion rate in the binary system compared to the pure surfactant, and the adsorption processes for OE3P3S/ATAB = 6:4 were mixed diffusion-kinetic adsorption mechanisms. With a combination of DLS data and TEM measurements, formations of vesicles in OE3P3S/ATAB = 6:4 solutions appeared to occur at a concentration of 0.05 mmol/L. By studying the formation of liquid crystal structures in an emulsion prepared with OE3P3S as the surfactant, it was found that the oil-in-water emulsion is birefringent with a Maltese cross texture, and the rheological properties revealed its predominant viscoelastic behavior and shear thinning properties.