A lithium-ion battery pack enclosure which consists of batteries is the prime source of energy for battery electric vehicles, BEV. While electric vehicle is in running condition, the battery enclosure comes across the worst scenarios like the vibrations coming from the road and impact because of road surface variations. These will cause structural stresses and variations in deformations for the enclosure structure. Electric vehicle safety wholly depends on how safe its battery pack assembly for its mechanical properties, like ability to resist deformation under static loading, vibration, and shock loading. Battery pack enclosure should meet all mechanical properties requirements. In parallel, the battery pack enclosure should be lighter in weight because it will help to improve the vehicle range and increase the battery pack life cycles. In the current study, a design of honeycomb battery pack enclosure is proposed based on mechanical parameters like mass of enclosure, natural frequency, and deformation for generic gravity loading. Baseline battery pack design was validated through physically tested data from literature and further comparative study performed on baseline battery pack enclosure and honeycomb battery pack enclosure for mass, vibrational performance, and static deformation.
Activated Metal Inert Gas (A-MIG) welding of EN10028 (SA516Gr70) steel was investigated using varying current, voltage, and gas flow rate to assess their influence on tensile strength (TS). A total of 100 welded samples were prepared and tested per ASTM standards. Material characterization was performed on samples with the highest and lowest TS to evaluate the correlation between microstructure and strength. Machine learning models Linear Regression, Random Forest Regression, and Support Vector Regression (SVR) were applied to predict TS based on welding parameters.
30 June 2024 in Material and Mechanical Engineering Technology
Gear drives are extremely critical elements of transmission systems. Designing gears that satisfy the application's requirements like load carrying capacity and strength whilst also being compact, lightweight, and economical is quite a challenging task. In recent times, a lot of research has been dedicated to optimizing speed reducers by making use of metaheuristic nature-inspired algorithms. The present work optimizes the weight of a spur speed reducer by employing two modified nature-inspired algorithms: Particle Swarm Optimization (PSO) and Shuffled Frog Leaping Algorithm (SFLA). Parameter optimization was carried out to select the best combination of c1, c2 and 𝜔 for the selected case study. It was found that there was a 1.1619% and 13.41% decrease in the cost function evaluation, as compared to the Crude Monte-Carlo and Stray Process methods used in the original case study, and around an 11% decrease as compared to results in published literature.