The Double U-pipe ground heat exchanger, known for its simple process, cost-effectiveness, high heat exchange efficiency, and low thermal resistance, remains the predominant type of ground heat exchanger in today’s shallow geothermal energy development and utilization. In recent years, significant research has focused on the factors influencing heat transfer and the heat exchange performance of Double U-pipe ground heat exchangers through experimental testing methods. However, studies that integrate numerical simulation with in situ testing have been less common. Utilizing the cylindrical heat source model theory and the results of regional in situ thermal response tests, this paper develops a Double U-pipe ground heat transfer model by establishing physical, mathematical, and heat transfer geometric models. It evaluates the effects of varying inlet temperatures, flow rates, and initial ground temperatures on heat exchange efficiency under heating conditions. The results confirm the accuracy of the Double U-pipe ground heat exchanger model based on in situ testing. They indicate that increasing the temperature differential between the inlet and initial temperatures, raising the initial ground temperature, and moderately enhancing the flow rate can improve the system’s heat exchange efficiency.
Blindly developing shallow geothermal energy (SGE) may lead to difficulties in reinjection, a low coefficient of performance (COP), and the waste of funds. In order to avoid these problems and improve development efficiency, it is necessary to scientifically conduct a development suitability evaluation and classify the suitability levels before development. This article takes Chengde City, Hebei Province, China as an example and constructs an evaluation index system based on the analysis of regional basic conditions. The Analytic Hierarchy Process (AHP) was used to calculate the constant weight. A Fuzzy C-means Clustering (FCM) analysis was used to determine the critical value of evaluation index classification and the interval threshold of variable weights. The parameters of the variable-weight model were calculated using the method of model backcalculation. Based on the constructed variable-weight model, the suitability of SGE development for groundwater sources in the study area was evaluated, and it was divided into five levels: most suitable area, suitable area, relatively suitable area, less suitable area, and unsuitable area. Through a verification analysis of engineering examples and a comparison with the evaluation results under traditional constant-weight models, it was found that the evaluation results based on variable weight theory have better data discreteness and a higher accuracy. Research has shown that variable-weight models can adjust the weight of each index based on its state value. Through this study, the accuracy of the suitability evaluation for regional SGE development can be improved. This can provide a certain reference for the suitability evaluation of SGE development in other regions.
The Double U-pipe ground heat exchanger, recognized for its straightforward process, cost-effectiveness, high heat exchange efficiency, and low thermal resistance, stands as the predominant ground heat exchanger type in today's shallow geothermal energy development and utilization. Recent years have seen significant research into the heat transfer influencing factors and heat exchange performance of Double U-pipe ground heat ex-changers via experimental testing methods. Yet, studies integrating numerical simulation with in-situ testing have been less frequent. Drawing on the cylindrical heat source model theory and the outcomes of regional in-situ thermal response tests, this paper develops a Double U-pipe ground heat transfer model by establishing physical, mathematical, and heat transfer geometric models. It assesses the impact of varying inlet temperatures, flow rates, and initial ground temperatures on heat exchange efficiency under heating conditions. The results validate the precision of the double U-pipe ground heat exchanger model based on in-situ testing. They show that enhancing the temperature differential between the inlet and initial temperatures, elevating the initial ground temperature, and moderately increasing the flow rate can boost the system's heat exchange efficiency.