Roman Fedotkin

Roman Fedotkin

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 October 2024 in E3S Web of Conferences
Verified
Conference Paper
Open access
PDF file
ODOtari Didmanidze
Otari Didmanidze
RFRoman Fedotkin
Roman Fedotkin
VKVitaliy Kryuchkov
Vitaliy Kryuchkov
NDNikita Degtiarev
Nikita Degtiarev
DDDaniil Dudin
Daniil Dudin
AAAleksei Alipichev
Aleksei Alipichev
The paper deals with the issue of expanding the scope of application of small-sized farm multi-purpose vehicles in the production process. The authors focus on the risks associated with the use of this type of machines. The authors prove that application of small-sized farm multi- purpose vehicles is feasible in agricultural production. To increase the interest of agricultural producers in small-sized farm vehicles it is necessary to develop a system of reliable assessment and verification of their actual consumer properties. For this purpose, the authors have studied the existing normative and technical documentation related to the functioning of this type of machines, varieties of small-sized vehicles and electrically driven trackless vehicles. Based on the available documents, they arranged a list of necessary tests to fully evaluate the main consumer properties. The test set consisted of nine procedures, including both static and dynamic tests. The paper provides data on the developed and manufactured experimental sample of electric cargo tricycle used on farms. The tricycle served as an example for the cycle of tests carried out according to the developed list. The paper summarizes the results obtained. Particular attention is paid to longitudinal and lateral sliding and tipping stability tests, center of mass position and traction tests, as well as dynamic tests to determine speed and braking performance, the mileage on a single battery charge, and vibration loading when operating under various road and climatic conditions.

22 April 2025 in Sel'skohozjajstvennaja tehnika: obsluzhivanie i remont (Agricultural Machinery: Service and Repair)
Verified
Journal Article
Closed access
DADepartment Tractors and Automobiles Russian State Agrarian University Moscow Timiryazev Agricultural Academy
Department Tractors and Automobiles Russian State Agrarian University Moscow Timiryazev Agricultural Academy
RFRoman Fedotkin
Roman Fedotkin
VKV. A. Kryuchkov
V. A. Kryuchkov
DDD. M. Dudin
D. M. Dudin
ETE. V. Titova
E. V. Titova
DAD. V. Anashin
D. V. Anashin
This article examines small-sized transport and technological vehicles for agricultural purposes. A review of the design features of domestic and foreign walk-behind tractors is provided. The transmission and chassis of mini-tractors of Russian, Belarusian and Chinese manufacture are considered. The development trend of small-sized transport and technological complexes is determined and a classification with the main distinctive features of the types of equipment is given.

27 July 2025 in The Agrarian Scientific Journal
Verified
Journal Article
Open access
PDF file
ODOtary Nazirovich Didmanidze
Otary Nazirovich Didmanidze
RFRoman Fedotkin
Roman Fedotkin
VKVitaly Alekseevich Kryuchkov
Vitaly Alekseevich Kryuchkov
NDNikita Ivanovich Degtyarev
Nikita Ivanovich Degtyarev
DDDaniil Maksimovich Dudin
Daniil Maksimovich Dudin
The paper presents the results of functional tests of the removable caterpillar undercarriage system of the rear drive axle of the Belarus-622 tractor with the ability to regulate the contact area of the caterpillar with the supporting surface. Domestic and foreign experience in testing and operating undercarriage systems for various vehicles and machines is analyzed, including the experience of researchers from Denmark, Switzerland, Sweden, Norway, including in relation to vehicles equipped with removable tracked undercarriage systems. The lack of a general test methodology and taking into account specific factors, including the redistribution of pressure on the soil along the support branch of the caterpillar, was revealed. A calculation and comparison of the average pressure of the movers on the soil was carried out for a tractor of a basic wheeled design equipped with a traction caterpillar units (removable caterpillar undercarriage system) for the rear and both drive axles. This showed that even without increasing the contact area, a tractor with removable tracked undercarriage system only on the rear axle has a significantly smaller impact on the soil than the wheeled tractor – 59.93 versus 82.11 kPa. Tests under real operating conditions were carried out on an experimental unplowed field with medium loamy soil in the Ryazan region. A kinematic mismatch between the front and rear drive wheels led to the front wheels slipping and required the front axle to be disengaged. To assess the traction capacity of the tractor and its possible increase as a result of the installation of a removable caterpillar undercarriage system, tests were carried out on the transportation of agricultural machines for tractors of a higher traction class: semi-trailer sprayers Caffini and an integral planter Demetra 2276-2019. When working with the seeder, the front wheels lost contact with the supporting surface and they became suspended, with the entire weight of the tractor and seeder only to the rear tracked units. Despite this, a high load-bearing capacity of the tracked modules and the tangential stabilizer, in particular, was revealed. The flaw detection revealed isolated signs of natural wear of the friction surfaces. No operational failures were identified. Directions for further research into removable caterpillar undercarriage systems are formulated in terms of improving operational test methods, design and engineering parameters of tracked units, including through the introduction of automation and robotics to create undercarriage systems adaptive to various soil and climatic conditions.

24 January 2025 in Sel'skohozjajstvennaja tehnika: obsluzhivanie i remont (Agricultural Machinery: Service and Repair)
Verified
Journal Article
Closed access
RFRoman Fedotkin
Roman Fedotkin
VKV. A. Kryuchkov
V. A. Kryuchkov
DDD. M. Dudin
D. M. Dudin
NDN. I. Degtyarev
N. I. Degtyarev
Slippage of tractor drive wheels is one of the main problems reducing the efficiency of agricultural work, tearing off the fertile soil layer and forming ruts. Excessive slippage leads to increased fuel consumption, decreased productivity, and soil degradation. In this regard, the development of effective methods for reducing slippage is necessary in work at agricultural enterprises. This article examines modern approaches to solving the problem of slippage.

27 December 2023 in The Agrarian Scientific Journal
Verified
Journal Article
Open access
PDF file
ODOtary Nazirovich Didmanidze
Otary Nazirovich Didmanidze
RFRoman Fedotkin
Roman Fedotkin
VKVitaliy Alekseevich Kryuchkov
Vitaliy Alekseevich Kryuchkov
NDNikita Ivanovich Degtyarev
Nikita Ivanovich Degtyarev
The problems of increasing traction and coupling properties and reducing soil compaction of tractors, its incomplete annual load and the shortage in the domestic tractor fleet are noted in the article. The possibility of solving problems by installing removable tracked undercarriage systems instead of wheels is indicated. The experience of creating and using undercarriage systems for various vehicles was analyzed, including the experience of researchers from Denmark, Switzerland, Sweden, Norway, etc. The experimental structure of caterpillar modules for the rear axle of the Belarus-622 tractor is presented. The possibility of adjusting the area of tracks contact surface is provided. A decrease in pressure on the soil to 60-65 kilopascals and up to 40-50 kilopascals was obtained due to the installation of caterpillar modules, respectively, on the rear or both axles of the tractor. It is proved that the developed modules provide increasing in traction and coupling properties and decreasing in the soil compacting effect of the tractor. The expediency of developing caterpillar modules for the front axle and the prospects for their creation for traction class 1,4 tractors in order to make up for the shortage of class 2.0 tractors are substantiated. The prospects for further automation of adjusting processes of removable tracked undercarriage systems for adaptation to various soil and climatic conditions are outlined.

24 December 2024 in Sel'skohozjajstvennaja tehnika: obsluzhivanie i remont (Agricultural Machinery: Service and Repair)
Verified
Journal Article
Closed access
RFRoman Fedotkin
Roman Fedotkin
DAD. V. Anashin
D. V. Anashin
DDD. M. Dudin
D. M. Dudin
The article presents a rationale for the parameters and operating modes of a hybrid counter-piston engine. It addresses the challenges of conventional four-stroke engines and proposes a counter-piston motion scheme for internal combustion engines designed for agricultural self-propelled machinery, such as motor cultivators, lawnmowers, snow blowers, and similar equipment. Additionally, the article examines the production process of these engines and explores design optimization options to reduce manufacturing time.