Liquid hydrogen is one of the high-quality energy carriers, but a large leak of liquid hydrogen can pose significant safety risks. Understanding its diffusion law after accidental leakage is an important issue for the safe utilization of hydrogen energy. In this paper, a series of open-space large-volume liquid hydrogen release experiments are performed to observe the evolution of visible clouds during the release, and an array of hydrogen concentration sensors is set up to monitor the fluctuation in hydrogen concentration at different locations. Based on the experimental conditions, the diffusion of hydrogen clouds in the atmosphere under different release hole diameters and different ground materials is compared. The results show that with the release of liquid hydrogen, the white visible cloud formed by air condensation or solidification is generated rapidly and spread widely, and the visible cloud is most obvious near the ground. With the termination of liquid hydrogen release, solid air is deposited on the ground, and the visible clouds gradually shrink from the far field to the release source. Hydrogen concentration fluctuations in the far field in the case of the cobblestone ground are more dependent on spontaneous diffusion by the hydrogen concentration gradient. In addition, compared with the concrete ground, the cobblestone ground has greater resistance to liquid hydrogen extension; the diffusion of hydrogen clouds to the far field lags. The rapid increase stage of hydrogen concentration at N8 in Test 7 lags about 3 s behind N12 in Test 6, N3 lags about 7.5 s behind N1, and N16 lags about 8.25 s behind N14. The near-source space is prone to high-concentration hydrogen clouds. The duration of the high-concentration hydrogen cloud at N12 is about 15 s, which is twice as long as the duration at N8, increasing the safety risk of the near-source space.

Recently, the application of cryogenic hoses in the field of cryogenic media has become a hot topic, especially in the industry of offshore liquefied natural gas and aerospace field. However, the structure of cryogenic hoses is complex, and reasonable structural properties are required due to the harsh working conditions. There is still plenty of scope for further development to improve the performance in all aspects. In this paper, the current development status of cryogenic hoses for liquefied natural gas (LNG) transportation is reviewed first, including the types, manufacturers, structural forms, performance, and key technical challenges. And then, the recent progress and prospect of cryogenic hoses for cryogenic liquid transportation (such as LNG and liquid oxygen) are summarized, including structure design, low-temperature resistant polymers, liquid oxygen compatible polymers, and leakage monitoring technologies. This paper provides a comprehensive overview of the research development and application of cryogenic hoses. Moreover, future research directions have been proposed to facilitate its practical applications in aerospace.

According to the characteristics of 5m³ hydrogen cylinder in a hydrogenation station, the influence factors of high-pressure hydrogen leakage and diffusion under different leakage aperture, cylinder pressure and wind speed were studied by using the safety analysis software PHAST. The results show that the area of downstream dangerous cloud cluster and diffusion isolation area increases with the increase of leakage diameter, cylinder pressure and wind speed. The aperture has a great influence on the mass leakage rate and the distribution range of cloud clusters, while the cylinder pressure mainly affects the distribution of cloud clusters. The influence of pressure on mass leakage rate is not as obvious as the influence of aperture. The wind speed has no effect on the mass leakage rate, and has only a slight impact on the downstream cloud cluster distribution.