In practical engineering, the choice of blade shape is crucial in the design process of turbine. It is because not only the structural stability but also the aerodynamic performance of turbine depends on the shape of blades. Generally, the design of blades is a typical multidisciplinary design optimization problem which includes many different disciplines. In this study, a fluid–structure coupling analysis approach is proposed to show the application of multidisciplinary design optimization in engineering. Furthermore, a strategy of uncertainty-based multidisciplinary design optimization using fluid–structure coupling analysis is proposed to enhance the reliability and safety of blades in turbine. The design of experiment technique is also introduced to construct response surface during uncertainty-based multidisciplinary design optimization using fluid–structure coupling analysis. The design solution shows that the adiabatic efficiency is increased and the equivalent stress is decreased, which means that better performance of the turbine can be obtained.
1 October 2023 in Journal of Systems Engineering and Electronics
The dynamic wireless communication network is a complex network that needs to consider various influence factors including communication devices, radio propagation, network topology, and dynamic behaviors. Existing works focus on suggesting simplified reliability analysis methods for these dynamic networks. As one of the most popular modeling methodologies, the dynamic Bayesian network (DBN) is proposed. However, it is insufficient for the wireless communication network which contains temporal and non-temporal events. To this end, we present a modeling methodology for a generalized continuous time Bayesian network (CTBN) with a 2-state conditional probability table (CPT). Moreover, a comprehensive reliability analysis method for communication devices and radio propagation is suggested. The proposed methodology is verified by a reliability analysis of a real wireless communication network.
1 January 2021 in IOP Conference Series: Materials Science and Engineering
Before the diversion plugging in hydropower project, underwater wall detection device can complete the probe of visual detection and obstacle clearing in high-velocity flow. Deflector which can provide a stronger compress diversion tunnel sluice gate power is the most important part in underwater wall detection device, but the mechanical and uncertainty analysis aren’t enough. In this paper, Finite Element Method and Response Surface Methodology are used to analyze strength and deformation of the deflector, meanwhile, the limit state functions about the maximal bending stress and maximal deformation are developed. Then, though comparing the data with experimental data and the value computed by user formula, the error is less than 2% and the error is allowable in engineering design. Finally, reliability analysis the deflector is achieved with the First-Order Reliability Method. In a word, form the calculating results and engineering operation, we know that the propose method in this paper using finite element method and response surface methodology to develop the function related to the limit functions of deflector under uncertainty is practical and feasible.
25 August 2018 in Advances in Mechanical Engineering
Uncertainties exist widely in the time-dependent performance degeneration processes of engineering systems in practice. Generally, in order to simplify the calculation, the random processes of uncertainty information are usually treated as time-independent or monotonic processes. The corresponding uncertainty analysis approaches are time independent. However, in this situation, the failure probabilities of performance can only be considered at the end of structure lifetime. To deal with the above challenge, an enhanced outcrossing rate method using the Kriging interpolation method is proposed in this study. The proposed method can utilize the correlation information between two design variables to predict the stress level and describe the time-dependent degeneration process. An uncertainty-based design and optimization problem of machine tool spindle is utilized to illustrate the effectiveness of the proposed strategy.
In this paper, a refined method for ultimate limit state assessment of ship hull girders based on non-linear finite element method is proposed. Commercial finite element analysis codes ANSYS and MSC.MARC are used to established the model and analyze the large elastoplastic deformation respectively. Firstly, the initial deflections and welding residual stresses of steel structures are considered and calculated. Secondly, the sensitivity factors of ultimate limit state are analyzed by taking box-girder, four classic-type seagoing ships and one standardtype inland-water ship as a benchmark study. Finally, the accuracy and applicability of the method in present study are presented and discussed by comparing with the results from other methods. The method is considered to be useful for ultimate limit state assessment of ship hull girders, which will promote the introduction of ultimate strength criterion to the design rules for seagoing ship or inland water ship in a sense.