This paper presents a new beamforming transmitter, Ultra Wide Band (UWB) pulse generator for contactless radar monitoring applications of vital signals. The system consists of a programmable delay circuit (PDC or τ), UWB pulse generator circuit and an array of Vivaldi planar antennas. Also, a new CMOS PDC controller is developed in order to provide pulse beamforming. The circuit was designed using 0.18μm CMOS process and the planar antenna array was designed with copper and FR-4 substrate. Spice circuit simulations show the generation of pulses with 136mVpp amplitudes and 350ps width. The generated pulse spectrum complies with the Federal Communications Commission (FCC) spectrum mask in the 6-10GHz range. The dynamic energy consumption is around 0.4pJ per pulse using 2V power supply at pulse repetition rate (PRR) of 100MHz. Electromagnetic simulations using CST MW 2010 shows the Main Lobe with an average magnitude of 12dBi, 30° × 32° angular width, and a beam steering between -15° and +25° for θ, and between -20° and +20° for the φ angles. This system can be applied to human monitoring in hospitals, ports and airports, industrial plants - like refineries and oil platforms - and military units as well.
The expansion of mobile connectivity with the arrival of 6G paves the way for the new Internet of Verticals (6G-IoV), benefiting autonomous driving. This article highlights the importance of vehicle-to-everything (V2X) and vehicle-to-vehicle (V2V) communication in improving road safety. Current technologies such as IEEE 802.11p and LTE-V2X are being improved, while new radio access technologies promise more reliable, lower-latency communications. Moreover, 3GPP is developing NR-V2X to improve the performance of communications between vehicles, while IEEE proposes the 802.11bd protocol, aiming for the greater interoperability and detection of transmissions between vehicles. Both new protocols are being developed and improved to make autonomous driving more efficient. This study analyzes and compares the performance of the protocols mentioned, namely 802.11p, 802.11bd, LTE-V2X, and NR-V2X. The contribution of this study is to identify the most suitable protocol that meets the requirements of V2V communications in autonomous driving. The relevance of V2V communication has driven intense research in the scientific community. Among the various applications of V2V communication are Cooperative Awareness, V2V Unicast Exchange, and V2V Decentralized Environmental Notification, among others. To this end, the performance of the Link Layer of these protocols is evaluated and compared. Based on the analysis of the results, it can be concluded that NR-V2X outperforms IEEE 802.11bd in terms of transmission latency (L) and data rate (DR). In terms of the packet error rate (PER), it is shown that both LTE-V2X and NR-V2X exhibit a lower PER compared to IEEE protocols, especially as the distance between the vehicles increases. This advantage becomes even more significant in scenarios with greater congestion and network interference.
The rapid adoption of generative artificial intelligence (AI) tools in academic environments has raised critical questions around ethics, authorship, and research integrity. This study proposes a comprehensive framework to support the ethical and responsible integration of AI technologies into academic and scientific work. Drawing on international editorial guidelines, institutional policies, and relevant legislation such as the GDPR, the framework maps good practices across all stages of research, from idea generation and literature review to manuscript preparation, publication and dissemination. The methodology includes documentary analysis, comparison of AI platforms, and examination of best practices from universities and publishers. Findings highlight key risks such as algorithmic bias, data privacy issues, plagiarism, and over-reliance on automated outputs. The framework offers practical guidance on tool selection, transparency measures, training programs, and institutional policy development, also introducing original resources such as checklists and templates for responsible AI use declarations. Conclusions align with general consensus that while AI can enhance efficiency and support academic work, its use must be governed by rigorous ethical standards and human oversight. The proposed model serves as a flexible reference for students, educators, and researchers seeking to balance technological innovation with scientific integrity.
1 December 2013 in Journal of Microwaves, Optoelectronics and Electromagnetic Applications
This paper presents the parameterization of the structure of a miniaturized exponential UWB TEM horn antenna and its effect on the matching impedance and directivity. In addition, a microstrip balun that feeds the antenna was proposed in order to improve the balance, and the return loss for low frequencies. Both the antenna and the microstrip balun were simulated to obtain a final high performance model to be manufactured at a later time. The proposed antenna operates in a frequency range from 3.2 GHz to 7.5 GHz, meeting the standards established by the FCC and the ETSI for ultra-wideband technology. Moreover, based on these characteristics, the antenna have many UWB radar applications such as monitoring of structures (buildings, bridges, etc.), anti-collision radar, vital signs detection, and long-distance communications, as a result of its high gain around 15 dB.
This paper presents a design of a transmitter pulse generator UWB-Ultra Wide Band in standard 180 nm MOSIS/CMOS technology. We proposed a pulse generator using Phase-Frequency Detector (PFD) that is designed using a modified architecture TSPC (True Single-phase Clock) positive edge triggered D Latch. The operation range and power consumption PFD is 45 ¿W to 2 mW, from 200 MHz to 5 GHz, respectively, and a minimum phase difference is 30 ps. Whole circuit has been simulated using LTSpice and the results had demonstrated the circuit capability to operate as an impulse generator. It generates pulses with 70 ps width. The Gaussian impulse achieves a very short pulse width of 133 ps, and amplitude of 48 mV. The generated pulse shape is similar to the 1st derivative. The complete design, occupies an area of 35400 ¿m2 including the inductor and without the PAD`s and a power consumption of 2 mW at 2.56 GHz@ 2 V supply voltage.