SUMMARY: In this paper, a new family of 3-degree-of-freedom planar parallel manipulators (PPMs), namely U-shape fixed base PPMs starting with an active prismatic joint on each leg, is proposed. In order to identify the best manipulators of this family, comparative kinematic and dynamic performance studies are performed. The kinematic performances are quantified through the local performance index, namely the kinematic isotropy. From the kinematic isotropy analysis results, it is observed thatPPR-PRP-PRP,PRP-PRP-PRP andPRR-PRP-PRP configurations have better kinematic design aspects compared to other configurations of this family of U-shape fixed base parallel configurations. Further, from the workspace analysis, it is observed that thePPR-PRP-PRP configuration has a higher value of workspace to the total area required ratio compared to other configurations. This paper also presents a comparative dynamic performance analysis of these top-three U-shape fixed base configurations in terms of dynamic driving performance measures, and energy requirements for three different (fixed base size of the manipulators) aspect ratios under two different loading conditions. From the analyses results, it is perceived that thePRP-PRP-PRP configuration is requiring lower energy and dynamic driving performances than others. These analyses are done with the help of multi-body dynamic software, namely MSC ADAMS, and the results are validated through the help of real-time experiments conducted on in-house fabricated prototypes of these three PPMs. In specific, the energy consumption is measured and compared in this study. Experimental results demonstrated that thePRP-PRP-PRP manipulator displays a considerably better performance in terms of minimum energy requirement.
20 September 2018 in IOP Conference Series: Materials Science and Engineering
Saffman–Taylor (ST) instability is also called viscous fingering (VF). It arises when the low viscous fluid is invaded into the high viscous fluid ina Hele-Shaw cell (HSC).The application of VF pattern is in oil recovery, hydrology, filtration and tissue engineering. Mainly radial HSC and lifted HSC arrangements are installed for rich variety of VF pattern formation. But In this paper, we consider theoretical and experimental works related to VF in lifted HSC. In the lifted Hele-Shaw cell (HSC), a thin film of high viscous stationary fluid is sandwiched between two circular or rectangular transparent glass plates. One of the glass plates is stationary and other plate is moved linearly to maintaining the linearity between the plates. Due to this action surrounding air (less viscous fluid) enters into the cellthrough the periphery and penetrates inside the high viscous fluid. After that, air fingers appear at the interface of fluids in the cell.