Lightweight concrete offers numerous advantages for modular construction, including easier construction planning and logistics, and the ability to offset additional dead loads induced by double-wall and double-slab features. In a previous study, authors proposed incorporating lightweight aggregate into foamed concrete instead of adding extra foam to achieve lower density, resulting in lightweight concrete with an excellent strength-to-density ratio. This paper further investigated the performance aspects of foamed concrete with lightweight aggregate beyond mechanical strength. To evaluate the effect of aggregate type and foam content, three mix compositions were designed for the lightweight concrete. Specimens were prepared for experimental tests on thermal conductivity and drying shrinkage of lightweight concrete. Results showed that while both the increase in foam volume and the incorporation of lightweight aggregate led to higher drying shrinkage, they also contributed to improved insulating properties and reduced potential of cracking. Using typical multi-storey modular residential buildings in Hong Kong and three other Chinese cities as case studies, simulations were performed to assess potential savings in annual cooling and heating loads by employing the proposed lightweight concrete. These findings demonstrate the practical benefits of using foamed concrete with lightweight aggregate in modular construction and provide valuable insights for further optimization and implementation.
Addressing the rise in global temperatures and the associated increase in greenhouse gases, particularly carbon dioxide, is a critical challenge necessitating innovative approaches within the building sector, a significant contributor to worldwide carbon emissions. While previous studies have demonstrated the prefabrication’s potential in reducing emissions, comprehensive assessments using actual project data for buildings constructed entirely with modular methods in Hong Kong are lacking. This study bridges this gap by evaluating the modular integrated construction (MiC) method through an embodied carbon assessment of the Kai Tak Community Isolation Facility. Using comprehensive project data from China State Construction (HK) Limited, the research conducts a comparative analysis between the actual emissions of the MiC method and those of a hypothetical conventional construction approach. Quantitative analysis reveals that MiC achieves a 20.7% reduction in embodied carbon, primarily due to shortened construction timelines, decreased waste generation, and optimized material usage. This significant reduction suggests substantial potential for decreasing the construction industry’s carbon footprint. The study provides empirical evidence supporting the environmental benefits of MiC in Hong Kong construction industry, promoting its broader adoption of MiC as a strategy for achieving carbon reduction targets. The findings align with Hong Kong’s carbon neutrality goals and contribute to the global initiative to mitigate the effects of climate change.