Among different inorganic and organic polarizer elements, thin-film light polarizers occupy a special place because of their flexibility, ease of integration into any optoelectronic circuit, and good functioning in the visible and near-infrared spectral range and can compete with Glan and Nicolas volumetric prisms. This paper presents the results of a study on how carbon-based nanoparticles influence on the basic properties of a well-known PVA-based polymer matrix, using which it is possible to obtain good transparency for parallel light components. An accent is made on graphene oxide nanoparticles, which are used as PVA sensitizers. It was shown for the first time that the structuring of PVA with graphene oxides allows an increased transmittance of the parallel light component to be obtained, saving the transmittance of the orthogonal one. Moreover, the graphene network can increase the mechanical strength of such thin-film PVA-based polarizers and provoke a change in the wetting angle. These advantages make it possible to use graphene oxide-structured thin-film light polarizers based on a PVA matrix as an independent optoelectronic element. Some comparative results for polarizers based on PVA-C70 structures are shown as well.
Subject of study. This study examined thin films of indium tin oxide with laser-deposited carbon nanotubes and shungites. Aim of study. The aim of this study was to experimentally investigate the impact of carbon nanotubes and shungites on the surface properties of indium tin oxide thin films, particularly their suitability as orienting layers in nematic liquid crystal devices. Method. Thin films and nanoparticles were deposited using a laser-oriented method with a CO2 laser. The optical scheme was synchronized with the control electrical grid, varying the field strength within a range of 100–600 V/cm. Surface analysis utilized atomic force microscopy in contact mode and contact angle measurements via the sessile drop method. Wetting hysteresis was measured to assess roughness. Free surface energy was calculated using the Owens–Wendt–Rabel–Kaelble method. Main results. The study delineates the relationship between the nanoparticles used, their deposition mode, and roughness. An increase in the dispersion component of free surface energy was observed during carbon nanotube deposition, while an increase in the polar component occurred during shungite deposition. Furthermore, the study demonstrates a shift in the orientation of 4-cyano-4′-pentylbiphenyl liquid crystals from tilted to homeotropic orientation during carbon nanotube deposition and from tilted to planar orientation during shungite deposition. Practical significance. The findings suggest that indium tin oxide films can serve not only as antireflective coatings and contacts but also as orienting layers with adjustable properties across a wide spectral and energy range. This potential simplifies the architecture of nematic liquid crystal devices used in laser technologies, display techniques, biomedicine, and related fields.
About Me
Larisa Fedorova is a student of "LETI" University; she is a researcher in Prof. N. Kamanina's Lab.
Larisa Fedorova is a student of "LETI" University; she is a researcher in Prof. N. Kamanina's Lab.