The activation of peracetic acid (PAA) to generate highly reactive species has emerged as a promising advanced oxidation process (AOP) for the degradation of refractory organic pollutants. This review systematically summarizes the recent advancements in PAA-based AOPs, encompassing various activation strategies, underlying reaction mechanisms, and applications across different environmental matrices. The activation methods are critically discussed, including direct energy activation, homogeneous catalysis, and heterogeneous catalysis. The generation process of diverse reactive species, like hydroxyl radicals (HO·), organic radicals (CH₃C(O)O·, CH₃C(O)OO·), and singlet oxygen (¹O₂), was introduced, and their oxidation selectivity and anti-interference ability were compared. Furthermore, the practical applications of PAA-based AOPs in treating wastewater, groundwater, and contaminated soil/sediments are reviewed. Finally, this review outlines critical challenges, including potential toxic byproduct formation, catalyst stability, and economic feasibility, and proposes future research directions to facilitate the transition of PAA-based AOPs from laboratory-scale research to full-scale implementation. This review provides insights for developing efficient, selective, and sustainable oxidation technologies, thereby contributing to the mitigation of emerging contaminant threats and the advancement of environmental remediation practices.

In this study, magnetic carbon nanopolymers (Fe₃O₄/C@PM) were synthesized by suspension polymerization using magnetic carbon nanoparticles as the matrix, 2-thiophene formaldehyde and acrylamide as the monomers, and ethylene glycol dimethacrylate (EGDMA) as the crosslinking agent. The obtained material was characterized using multiple techniques, including scanning electron microscopy (SEM), infrared spectroscopy (FTIR), X-ray diffraction (XRD), N₂ adsorption–desorption, and thermogravimetric analysis (TGA). The adsorption effects of Zn²⁺, Cd²⁺, and Pb²⁺ in the mixed solution were evaluated using magnetic carbon nanoparticles (Fe₃O₄/C) and Fe₃O₄/C@PM as adsorbents. The adsorption isotherms, kinetic models, and cyclic regeneration of various metal ions, including Zn²⁺, Cd²⁺ and Pb²⁺, were studied. The results showed that the Fe₃O₄/C@PM maintained a slightly aggregated spherical morphology similar to Fe₃O₄/C and exhibited excellent adsorption capacity for all of Zn²⁺, Cd²⁺, and Pb²⁺, with maximum adsorption capacities of 343.3, 250.7, and 177.6 mg·g⁻¹, respectively. The adsorption mechanisms were mainly based on the chemical interactions between metal ions and functional groups on the surface of polymers. The kinetic study revealed that the adsorption process followed a pseudo-second-order kinetic model. When Fe₃O₄/C@PM was reused five times, its adsorption rates for Zn²⁺, Cd²⁺, and Pb²⁺ remained above 81%, indicating its great potential for the treatment of wastewater containing Zn²⁺, Cd²⁺, and Pb²⁺.

A lignosulfonate-derived iron–carbon composite catalyst was fabricated via hydrothermal pyrolysis and employed to activate peroxydisulfate (PDS) for tetracycline hydrochloride (TCH) degradation. The optimized LFC possessed a porous carbon matrix uniformly decorated with Fe⁰/Fe₃O₄/Fe₂O₃ crystals, providing abundant active sites for catalytic reactions. The LFC/PDS system achieved nearly 100% TCH removal within 30 min at neutral pH and exhibited high efficiency over a broad pH range, strong anti-interference ability, and good universality for various organic pollutants. Mechanistic investigation confirmed that TCH degradation was dominated by a singlet oxygen (¹O₂)-mediated non-radical pathway, with minor contribution from radical species. The synergistic effect of iron cycle and surface functional groups promoted the generation of reactive oxygen species and ¹O₂. This research provides a low-cost, eco-friendly and efficient strategy for antibiotic wastewater treatment.

Uric acid (UA), the end product of purine metabolism in humans, is a crucial biomarker closely associated with various diseases. This study developed a novel enzyme-free colorimetric sensing platform based on starch-derived nitrogen-doped biochar (NC) for the highly sensitive and selective detection of UA in human body fluids. The NC material with a high specific surface area and abundant nitrogen active sites was prepared via a two-step strategy involving hydrothermal synthesis followed by high-temperature pyrolysis, using starch and urea as raw materials. It efficiently catalyzed dissolved oxygen to generate reactive oxygen species (·O2- and 1O2) under mild conditions, which oxidized 3,3',5,5'-tetramethylbenzidine (TMB) to produce a blue-colored product (TMBox). UA reduced TMBox back to colorless TMB, resulting in a decrease in absorbance at 652 nm, enabling the quantitative detection of UA. Key reaction conditions were systematically optimized. Material characterization and mechanistic investigations confirmed the catalytic performance. The method demonstrated a wide linear range of 10-500 μmol·L-1 and a low detection limit of 4.87 μmol·L-1, along with excellent selectivity, stability, and reproducibility. Practical application in human serum and urine samples yielded results consistent with clinical reference ranges, and spike-recovery rates ranged from 95.5% to 103.6%, indicating great potential for real-sample analysis.

Uric acid (UA), a key end-product of human purine metabolism, serves as an important biomarker linked to multiple disorders. This study developed a novel enzyme-free colorimetric sensing platform based on starch-derived nitrogen-doped biochar (NC) for the highly sensitive and selective detection of UA in human body fluids. The NC material with a high specific surface area and abundant nitrogen active sites was prepared via a two-step strategy involving hydrothermal synthesis followed by high-temperature pyrolysis, using starch and urea as raw materials. Under mild conditions, the NC effectively catalyzes dissolved oxygen to produce reactive oxygen species (·O₂⁻ and ¹O₂), which oxidize 3,3′,5,5′-tetramethylbenzidine (TMB) to a blue-colored oxidation product (TMBox). The presence of UA reduces TMBox to colorless TMB, leading to a measurable decrease in absorbance at 652 nm and enabling quantitative UA detection. Key reaction conditions were systematically optimized. Material characterization and mechanistic investigations confirmed the catalytic performance of the NC. The method demonstrated a wide linear response from 10 to 500 μmol·L⁻¹, with a detection limit of 4.87 μmol·L⁻¹, and demonstrated outstanding selectivity, stability, and reproducibility. Practical application in human serum and urine samples yielded results consistent with clinical reference ranges, and spike-recovery rates ranged from 95.5% to 103.6%, indicating great potential for real-sample analysis.