Jue Yang

Prof. Dr. Jue Yang

orcid

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 May 2018 in Energies
Verified
Journal Article
Open access
PDF file
STSenqi Tan
Senqi Tan
JYJue Yang
Jue Yang
XZXinxin Zhao
Xinxin Zhao
THTingting Hai
Tingting Hai
WZWei Zhang
Wei Zhang
Research demonstrated that the application of a multi-speed transmission could improve the dynamic and economic performance of electric vehicles. This paper deals with a novel multi-speed transmission for the electric dump truck (EDT) operating on the structure route (SR), which has a definite starting point and end point without complex traffic conditions. To optimize the gear ratio and shift schedule to reduce energy consumption in such conditions, the mathematical model of the transmission and the dynamic model of the EDT are initially required. Following this, the shift schedule is presented according to the motor efficiency map. After that, the gear ratio optimization is carried out by a particle swarm optimization (PSO) algorithm. Moreover, the proposed EDT is compared with an EDT with a single-speed transmission. The simulation results show that the energy consumption is reduced by 6.1%.

24 February 2025 in World Electric Vehicle Journal
Verified
Journal Article
Open access
PDF file
RCRubao Cheng
Rubao Cheng
WZWei Zhang
Wei Zhang
JYJue Yang
Jue Yang
SWSun Wang
Sun Wang
LLLaiao LI
Laiao LI
BEVs (Battery Electric Vehicles) have received widespread attention from various countries for their potential in combating global warming, the energy crisis, and environmental pollution. The driving range and energy consumption of BEVs vary significantly under different driving cycles, which often results in discrepancies between the values reported by manufacturers and real-world data. To address this issue, this paper establishes a modular simulation model of a BEV on the Matlab/Simulink platform and conducts simulation experiments and analyses of driving range and energy consumption under three different standard driving cycles, namely, the NEDC (New European Driving Cycle), WLTC (World Light Vehicle Test Cycle), and CLTC-P (China Light-duty Vehicle Test Cycle for Passenger Car), and compares the results with data from vehicle manufacturers and consumers. The results of the study show that the NEDC conditions are more ideal, the CLTC-P conditions are the most intense vehicle driving, and the WLTC conditions require the highest overall vehicle performance. Compared with other standard cycles, the WLTC conditions show better alignment with real-world driving range data. The two main factors affecting the energy consumption in each condition are driving range and acceleration. The energy recovery strategy, braking frequency, and average deceleration speed of the driving cycle conditions are important factors affecting the braking energy recovery. This study provides a theoretical basis for driving range and energy consumption testing and driving cycle condition improvement of BEVs.

11 January 2018 in Energies
Verified
Journal Article
Open access
PDF file
Weiwei YangWeiwei Yang
Weiwei Yang
JLJiejunyi Liang
Jiejunyi Liang
JYJue Yang
Jue Yang
NZNong Zhang
Nong Zhang
Due to the different working conditions and specification requirements of mining trucks when compared to commercial passenger vehicles, better fuel efficiency of mining trucks could lead to more significant economic benefits. Therefore, investigating a hybrid transmission system becomes essential. A coaxial power-split hybrid powertrain system for mining trucks is presented in this paper. The system is characterized as comprising an engine, a generator (MG1), a motor (MC2), two sets of planetary gears, and a clutch (CL1). There are six primary operation modes for the hybrid system including the electric motor mode, the engine mode, the hybrid electric mode, the hybrid and assist mode, the regenerative mode, and the stationary charging mode. The mathematical model of the coaxial power-split hybrid system is established according to the requirements of vehicle dynamic performance and fuel economy performance in a given driving cycle. A hybrid vehicle model based on a rule-based control strategy is established to evaluate the fuel economy. Compared with the Toyota Hybrid System (THS) and the conventional mechanical vehicle system using a diesel engine, the simulation results based on an enterprise project indicate that the proposed hybrid system can enhance the vehicle’s fuel economy by 8.21% and 22.45%, respectively, during the given mining driving cycle. The simulation results can be used as a reference to study the feasibility of the proposed coaxial hybrid system whose full potential needs to be further investigated by adopting non-causal control strategies.

Verified
Journal Article
Open access
PDF file
WZWei Zhang
Wei Zhang
JYJue Yang
Jue Yang
WZWei Zhang
Wei Zhang
Fei MaFei Ma
Fei Ma
When the pure electric mining dump truck is working, it mainly ascends the slope at full load and descends the slope at no load. The loading state of the vehicle and the slope of the road will directly affect its axle load distribution and braking force distribution. In this paper, the slope dynamics analysis of the pure electric double-axle four-wheel drive mining dump truck was carried out. Based on the regenerative braking priority strategy, four regenerative braking control methods were developed based on the Matlab/Simulink platform and ADVISOR 2002 vehicle simulation software to study the ability of regenerative braking energy recovery and its impact on vehicle economic performance. The simulation results show that the regenerative braking priority control strategy used can maximize the regenerative braking force of the vehicle; the regenerative energy recovery capability of pure electric mining dump truck is proportional to the regenerative braking force that can be provided during braking; the two-axis braking strategy based on the I curve and the β line can make full use of the front and rear axle regenerative braking force when the braking intensity is large, and recover more braking energy; under road drive cycle, the single-axis braking force required to the braking strategy based on the maximized front axle braking force is the largest among all strategies, the motor braking efficiency is the highest, and the recovered braking energy is the most. For the studied drive cycle, the regenerative braking technology can reduce the vehicle energy consumption by 1.06%–1.56%. If appropriate measures are taken to improve the road surface condition and reduce the rolling resistance coefficient from f = 0.04 to f = 0.02, the regenerative braking technology can further reduce the vehicle energy consumption to 4.76%–5.73%. The economic performance of the vehicle is improved compared to no regenerative braking. In addition, the vehicle loading state and the driving motor working efficiency also directly affect the regenerative braking energy recovery capability of the pure electric mining truck.

3 March 2021 in Applied Sciences
Verified
Journal Article
Open access
PDF file
BQBonan Qin
Bonan Qin
RZRiya Zeng
Riya Zeng
XLXiaoman Li
Xiaoman Li
JYJue Yang
Jue Yang
Road-rail vehicles built on traditional vehicle chassis can only switch operation modes at particular areas such as level crossings, thus limiting the working scope and efficiency of routine railway inspection and maintenance. This paper proposes a novel tracked chassis for the road-rail vehicle with a multi-cylinder hydropneumatic suspension system, which can better adapt to rough terrains and enhance the vehicle ride performance. Based on this hydropneumatic suspension design, the single-cylinder mathematical model is derived and validated by experimental data. An in-plane multi-body dynamics (MBD) model and road model are established, combined with the hydropneumatic suspension model, including the LuGre friction force. Virtual tests are conducted to investigate the effects of different initial gas volumes, varied diameters and damping pipe lengths on the ride performance. The results indicate that improper damping pipe diameter and charge gas volume will deteriorate the ride performance, which provides a useful reference for the optimization design and control of the hydropneumatic system.

20 September 2018 in IET Intelligent Transport Systems
Verified
Journal Article
Open access
PDF file
Weiwei YangWeiwei Yang
Weiwei Yang
JYJue Yang
Jue Yang
JLJiejunyi Liang
Jiejunyi Liang
NZNong Zhang
Nong Zhang
Unmanned mining is one of the essential fields of mining technology at present. Therefore, optimisation with known driving speed cycle for fuel economy, emissions, driveability, and more is no longer exclusive, the optimal velocity trajectory based on road information has been studied. Given that both fuel consumption and transport time influence transport costs of mining trucks, an energy management strategy (EMS) based on velocity optimisation is proposed and illustrated on a series hybrid electric mining truck in this study. The vehicle speed and SOC are adopted as state variables. Then two‐scale dynamic programming is applied to calculate optimum velocity trajectory and power distribution. Simulation results reveal that the weighting coefficients of transport time and fuel economy can be optimally distributed for the different design requirements. Compared to the results under the known driving speed cycle, the proposed EMS can enhance fuel economy by 26.59% under the guarantee of same transport time, or transport time can be reduced by 42.4% without sacrificing the fuel consumption. Therefore, the proposed velocity optimisation strategy can reduce transport costs for mining enterprises significantly.