Bin Zhang

Dr. Bin Zhang

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 December 2019 in IEEE/ASME Transactions on Mechatronics
Verified
Journal Article
Closed access
HJHuaiyuan Jia
Huaiyuan Jia
WSWeiwei Shang
Weiwei Shang
FXFei Xie
Fei Xie
BZBin Zhang
Bin Zhang
SCShuang Cong
Shuang Cong
Cable-driven parallel robots (CDPRs) can provide a high speed and a heavy payload in a large workspace. The main challenge of CDPRs stems from the dynamic control, in which all cables must coordinate with each other to remain in tension, and the cable-driven form may lead to model uncertainties. To solve it, the second-order sliding-mode (SOSM) is combined with the multi-cable synchronization idea to propose a new SOSM-based synchronization control (SOSM-SC) strategy for CDPRs. The goal of the cross-coupled control (CCC) approach is to improve the synchronization motion relationship between all cables and guarantee better trajectory tracking control, while the SOSM can restrain the model uncertainties and external disturbances. The Lyapunov theory is utilized to prove the asymptotic stability of the closed-loop control system of CDPRs. Trajectory tracking experiments indicate that compared with the existing synchronization control (SC) strategy and the augmented proportional-derivative (APD) strategy, the proposed SOSM-SC strategy significantly reduces the cable tracking error and the cable synchronization error and ultimately improves the control accuracy for the mobile platform. Tracking experiments of the anti-disturbance indicate that the SOSM-SC strategy can retain good tracking accuracy under external disturbances.

15 August 2018 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
WSWeiwei Shang
Weiwei Shang
BZBingyuan Zhang
Bingyuan Zhang
BZBin Zhang
Bin Zhang
FZFei Zhang
Fei Zhang
SCShuang Cong
Shuang Cong
Cable-driven parallel robots (CDPRs) have low moving inertia and provide high-speed motion over large workspace. The main challenges of CDPRs stem from the fact that cables should be in tension during motion control. Cable tension is closely related to the synchronization motion relation between cables which is often omitted in the existing controllers for CDPRs. To solve it, this paper proposes two synchronization controllers in the cable space (CS) to realize the synchronization motion between cables, and finally increase the tracking accuracy of the moving platform. The two synchronization controllers are proven to guarantee asymptotic convergence to zero of both tracking error and synchronization error. The trajectory tracking experiments are implemented on a self-built 3-DOF CDPR, and the experiments are compared with the traditional augmented PD (APD) controllers neglecting synchronization. The experimental results indicate that, the tracking error and the synchronization error of the moving platform decrease greatly by using the synchronization controllers.

20 April 2020 in IEEE Robotics and Automation Letters
Verified
Journal Article
Closed access
WSWeiwei Shang
Weiwei Shang
FXFei Xie
Fei Xie
BZBin Zhang
Bin Zhang
SCShuang Cong
Shuang Cong
Zhijun LiZhijun Li
Zhijun Li
Cable-driven parallel robots (CDPRs) are robots with novel structures, wherein flexible cables, instead of rigid links, are employed to pull mobile platforms. This structural change enables CDPRs to not only offer potential advantages, but also introduces control challenges with regard to frictional uncertainties, dynamic modeling errors, and multi-cable motion coordination. To address these concerns, a novel adaptive cross-coupled control (ACCC) scheme, capable of achieving high-accuracy trajectory tracking control, has been proposed in this study. In the proposed ACCC scheme, a new synchronization error variable has been defined to adjust the coordination motion of adjacent cables; additionally, an adaptive dynamic control strategy has been designed to compensate for the inertia and friction of winches linked to cables. Lastly, an adaptive robust control has been used to restrain un-modeled dynamics and external disturbances. The proposed ACCC scheme was compared against the synchronization control (SC) scheme and the well-known adaptive control (AC) scheme of Slotine-Li by applying them to an actual non-redundant CDPR during trajectory tracking experiments. Corresponding results demonstrated that compared to the SC and the AC scheme, the proposed ACCC scheme serves to improve both tracking and synchronization accuracies of cables, thereby ultimately enhancing the control performance of mobile platforms. Robustness of the ACCC scheme against external disturbance has also been verified.

19 November 2020 in IEEE/ASME Transactions on Mechatronics
Verified
Journal Article
Closed access
BZBin Zhang
Bin Zhang
WSWeiwei Shang
Weiwei Shang
SCShuang Cong
Shuang Cong
Zhijun LiZhijun Li
Zhijun Li
Although cable-driven parallel robots (CDPRs) act as parallel mechanisms that are driven by multiple cables coordinately, the coordination motion analysis is often omitted. Therefore, the coordination effect in the task space (TS) of redundantly actuated CDPRs is addressed in this paper, and a scheme of the coordinated dynamic control in the TS (CDCT) is proposed to guarantee high-precision control. Additionally, to handle the inevitable external disturbances, the robust analysis is also synthesized in the CDCT scheme, and the stability of the whole control system is proved. Moreover, due to the existing actuation redundancy, the cable tension distribution method is presented to ensure that all cables are always kept in tension. Trajectory tracking experiments are carried out on the redundantly actuated CDPR, and the augmented PD (APD) scheme without coordination and robust effect and the CDCT scheme without robust effect (CDCT-wR) are used for comparisons. The results show that, there is a significant effect of the coordinated control with a better coordination performance by using the CDCT scheme, and the final tracking accuracy has an evident improvement. Besides, the satisfactory robustness of the CDCT scheme in resisting external disturbances is also verified via supplementary experiments.

25 January 2022 in IEEE Robotics and Automation Letters
Verified
Journal Article
Closed access
SPShunxiang Pang
Shunxiang Pang
WSWeiwei Shang
Weiwei Shang
FZFei Zhang
Fei Zhang
BZBin Zhang
Bin Zhang
SCShuang Cong
Shuang Cong
The lightweight design of robots is an important factor in the field of human-robot interaction. Thus, a lightweight 7-DOF cable-driven manipulator is proposed and manufactured, including a shoulder joint with 3-DOF, an elbow joint with 1-DOF, and a wrist joint with 3-DOF. The offset design of the shoulder joint increases the workspace and facilitates the electrical wiring of the manipulator. To solve the cable relaxation problem of the long-term operation of the manipulator, novel cable tensioning mechanisms are proposed based on the characteristics of shoulder, elbow, and wrist joints, which enable rapid tensioning during the motion process. Moreover, forward/inverse kinematic model are established based on virtual coupling joints to analysis the performance of the manipulator. Both the tensile tests of the cables and the stiffness experiments of the wrist and elbow joints are carried out The experimental results show that the maximum stiffness values of the elbow joint and the wrist joint are 1066.3 N $\cdot$ m/rad and 319.8 N $\cdot$ m/rad respectively, which can be comparable to the human arm.

22 June 2020 in IEEE Transactions on Industrial Informatics
Verified
Journal Article
Closed access
FXFei Xie
Fei Xie
WSWeiwei Shang
Weiwei Shang
BZBin Zhang
Bin Zhang
SCShuang Cong
Shuang Cong
Zhijun LiZhijun Li
Zhijun Li
Cable-driven parallel robots (CDPRs) are a new type of parallel robots that use cables to control a mobile platform. They afford several advantages, including large workspace, low inertia, and high payload capacity. However, there are several problems in the high-precision trajectory tracking control of CDPRs. On the one hand, all the cables must remain in tension during the entire motion process. On the other hand, the controller design is subjected to model uncertainties and external disturbances. Accordingly, this paper proposes a robust synchronization control (RSC) scheme in the cable length space to achieve high-precision trajectory tracking. The synchronization control ensures motion coordination among all the cables and prevents cable relaxation, while the robust control eliminates modeling errors and restrains external disturbances. The uniformly ultimate boundedness of the tracking and synchronization errors in the closed-loop system equation was proved using the Lyapunov theory. Simulations and experiments of the trajectory tracking control were both implemented on a 3-DOF CDPR. Compared with the adaptive robust control (ARC) scheme, and the augmented proportional derivative (APD) scheme on the premise of the approximate energy consumption, the proposed RSC scheme could reduce not only the tracking errors of the cables but also the synchronization errors between adjacent cables. Moreover, the RSC scheme could significantly improve the trajectory tracking accuracy of the mobile platform. The robustness of this scheme was verified using load experiments and torque-disturbance experiments.