Structural identification is a powerful concept that permits rational characterizations of constructed facilities and their loading environments. Potential uses of structural identification to solve numerous problems related to condition assessment of civil infrastructure are proposed. Definitions and terminology related to the concept are formulated. The experimental, analytical, and information tools that are needed for a successful structural identification of a constructed facility are discussed. Experimental techniques that permit effective structural identification applications to highway bridges have been validated and demonstrated on an operating steel-stringer highway bridge serving as a test bed. Experiences gained during the applications of different forms of modal analysis and instrumented monitoring are presented with example experimental data and results. Hardware, software, and design requirements for field experiments are discussed.
1 September 1996 in Journal of Infrastructure Systems
Integrated analytical and experimental research, conducted for exploring objective, global condition assessment and evaluation of bridge serviceability and safety, is summarized. A related terminology with definitions for critical terms is offered. Nondestructive and destructive field testing and structural identification of seven actual bridge test specimens enabled formulating a bridge condition assessment and reliability evaluation methodology. Field-calibrated analytical models, developed by structural identification, are studied to understand the real behavior and performance of actual bridges and to quantify relative contributions of different stiffness and resistance mechanisms. While our heuristic knowledge base has served us well, further rationalizing our bridge engineering practice is needed to achieve the optimum management of the highway transportation infrastructure necessary for continued advances in the next century.
Diagnostic instrumentation and monitoring of bridges are essential for reliable structural condition assessment and performance evaluation. This management step applies particularly to structurally deficient bridges that cannot be accurately evaluated by inspection and/or analysis alone. Reliable evaluation is an economic and engineering requirement before any decision-making for preventive action. Thus, field diagnostic capabilities are indispensable tools to enable evaluation and support field-calibrated modeling, analysis, identification, and load rating. The reliability of structural evaluation for objective bridge management is determined by the dependable performance of all the system components. Although instrumentation and monitoring procedures appear to be well established, some misconceptions still keep recurring critically in practice. To improve the state-of-practice of structural diagnostics, available field systems and methods need re-evaluation of their instrumentation and monitoring performance under real-world conditions. Subsequently, dedicated field capabilities can be formulated and developed to have advanced and practical characteristics. This article discusses various less-emphasized critical aspects of multidisciplinary research experience on bridge structural health monitoring, to explore dependable evaluation methods, compile practical data on actual bridge monitoring for immediate implementation, and generate focused insight for the development of advanced, reliable, and practical research methods in the future. To reach a systematic conceptualization for a better methodology, various diagnostic components are criticized. The resulting discussions on the various bridge evaluation aspects are practical for transportation agencies, bridge officials, and researchers. The detailed aspects are intended to help select appropriate implementation practices in field applications of bridge instrumentation and monitoring. These help focus bridge management policies, re-orient evaluation strategies, and reconsider diagnostic methods.
Results of laboratory tests on four reinforced concrete flat slab‐interior column connections, carrying quasi‐static, cyclic, horizontal loadings are presented. The specimens, at about two‐thirds scale, had reinforcing steel arrangements representative of column strips. The major aspects studied are the resistance and final failure mechanisms, the relative influence of the cross‐sectional width of the column, and the contribution of vertical gravity loading on the propagation of failure. Test results show that combined primary bending, slab failures, and final one‐side punching‐shear failures had occurred. The failure contributors, their development areas, and final shape are described. The results of the present series of tests are compared with solutions of current calculation methods, which suggest using either the full slab width between the field centerlines, beam analogies, or the linear shear stress distribution on a critical perimeter around the column.
1 June 2005 in Journal of Composites for Construction
Tech 21 is the third all-composite vehicular bridge installed in the United States. The deck has sandwich configuration with a center core made by bonding orthotropic fiberglass and polyester tubes. The three trapezoidal beams supporting the deck were fabricated using E-glass fibers with polyester resin. Each beam was fabricated as an integral unit with its deck section to facilitate transportation to the site, erection, and construction. The two-lane bridge is the first fully instrumented all-composite vehicular bridge, including an extensive health-monitoring system installed during its fabrication. A nearly four-year long continuous monitoring was carried out to demonstrate the performance of the bridge. Field monitored information was studied to evaluate the behavior and durability of composites in the harsh infrastructure environment. This evaluation determines the level of confidence in the long-term field benefits of composite materials and technology.
A rational approach for evaluating structural integrity of aged and deteriorated steel bridges—incorporating analytical, mechanical, and microstructural characterizations—is presented. Critical regions of built-up members, salvaged from decommissioned truss bridges, were identified using structural finite element analysis and the results guided the sampling process for microstructural analysis. A set of mechanical and metallurgical characterization procedures were designed to understand the mechanical history of critical sections of the structure. Observations made on the microstructure of a naturally stressed region revealed segregation of pearlite and MnS inclusions and flow of grains. The mechanical flow and microcracks observed in the stress-concentrated tensile region of the member indicate a high probability of eventual brittle failure of the material. Since stress-assisted aging seems to affect the microstructure, this may be used as a means of unobtrusive testing for susceptibility to failure. It follows that the microstructural analysis procedure, to detect stress-assisted aging and failure, may serve as a novel field-evaluation technique for aged steel structures.