HADJADJ Moussa Moussa

Dr. HADJADJ Moussa Moussa

orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications

17 December 2024 in STUDIES IN ENGINEERING AND EXACT SCIENCES
Verified
Journal Article
Open access
PDF file
HMHADJADJ Moussa Moussa
HADJADJ Moussa Moussa
MGMohamed Guendouz
Mohamed Guendouz
DBDjamila Boukhelkhal
Djamila Boukhelkhal
The sector of civil engineering has shifted towards the direction of sustainable development, with a focus on environmental protection as an important objective. This strategy is implemented by recycling and reusing polluted industrial by-products and waste. The manufacturing process of granite products generates huge quantities of granite waste (GW) worldwide, which causes environmental pollution when dumped. Self-compacting sand concrete (SCSC) is a novel, highly fluid, and durable concrete widely used as a construction material. In this work, the effect of using recycled waste granite (GW) and seashell powder (SSP) on the mechanical strength and compactness of eco-self-compacting sand concrete (SCSC) was studied. For this purpose, SSP has been used to substitute cement at levels of 5, 10, and 15% by weight, and GW replaced the natural sand at levels of 0, 10, 20, 30, and 40% by volume. The fresh properties of SCSC mixtures are evaluated by the mini-slump flow diameter. The compressive and flexural strengths and compactness of hardened SCSC were assessed. A SEM analysis was also used to examine the microstructure development of the hardened SCSC mixtures. The results indicate that using SSP for GW- based SCSC gives acceptable flowability with a low dosage of superplasticizer (SP). Moreover, an enhancement in compressive and flexural strengths and compactness of the SCSC mixtures was found by adding up to 40% GW combined with up to 15% SSP. 10SSP+40GW mix showed the highest mechanical strengths and compactness, with a denser microstructure after 90 days with an improvement of 30.61% and 35.82% in compressive and flexural strength, respectively, compared to control mixtures.

8 January 2025 in STUDIES IN ENGINEERING AND EXACT SCIENCES
Verified
Journal Article
Open access
PDF file
Mohamed GuendouzMohamed Guendouz
Mohamed Guendouz
DBDjamila Boukhelkhal
Djamila Boukhelkhal
LBLoubna Benatallah
Loubna Benatallah
SHSomia Hamraoui
Somia Hamraoui
HMHADJADJ Moussa Moussa
HADJADJ Moussa Moussa
Building materials generate about half of solid waste worldwide, with an environmental impact at every step of its production process, i.e., extraction of raw materials, processing, manufacturing, transportation, construction, and disposal at the end of a building’s useful life. Among these materials, we distinguish the marble powder waste (MW). This work aims to study the possibility of recycling MW, especially those from the cutting and polishing process of marble stone discharged in nature. After collecting, these wastes were crushed, extruded in the form of grains, and used in the mass of self-compacting sand concrete (SCSC) as a partial replacement of natural sand volume with different percentages (10, 20, 30, 40, and 50%). The obtained results show a decrease in the fluidity and an increase in the density and occluded air of SCSC with increasing MW content. However, the compressive and flexural strengths of SCSC are improved by about 24% and 28% for a 10% substitution ratio of natural sand with MW and maintained comparable to CSCSC for up to 50% MW. The capillary water absorption, shrinkage, and thermal conductivity of all MW-based SCSCs are greater than those of the control SCSC. However, up to 40% of MW content, all SCSC mixes are classified as acceptable for structural application with water absorption and shrinkage less than 10% and 1000 m/m, respectively. This study also ensures that reusing marble wastes in SCSC gives a positive approach to reduce the cost of materials and solve some environmental problems.

8 January 2025 in STUDIES IN ENGINEERING AND EXACT SCIENCES
Verified
Journal Article
Open access
PDF file
Mohamed GuendouzMohamed Guendouz
Mohamed Guendouz
DBDjamila Boukhelkhal
Djamila Boukhelkhal
HMHADJADJ Moussa Moussa
HADJADJ Moussa Moussa
LBLoubna Benatallah
Loubna Benatallah
The amount of industrial waste in household waste is significant and increasing over time. Due to their lifespan, these wastes currently constitute a major concern, requiring management from an economic, social or environmental point of view. With a focus on environmental preservation as a key goal, the sector of civil engineering has shifted towards sustainable development. Among the various landfilled industrial wastes, we distinguish the waste foundry sand (WFS) that is generated in large quantities. This work aims to study the recycling of foundry sand waste (WFS) as fine aggregate in the manufacturing of flowable sand concrete (FSC). For this, the sand is substituted with the WFS at dosages of 0%, 3%, 5%, 8%, and 10%. The influence of this waste on the fresh properties, such as slump flow, bulk density, and hardened properties such as compressive strength and water absorption by capillary of FSC, was studied, analysed, and compared with control flowable sand concretes. The results obtained show that the FSC made with WFS has some better mechanical characteristics and less absorption than conventional concrete. Additionally, this study ensures that recycling these wastes in FSC provides a beneficial way to save material costs and address some environmental issues, as well as obtain a new material that allows for use in the various types of structural components.

25 June 2025 in Budownictwo i Architektura
Verified
Journal Article
Open access
PDF file
HMHadjadj Moussa
Hadjadj Moussa
Mohamed GuendouzMohamed Guendouz
Mohamed Guendouz
DBDjamila Boukhelkhal
Djamila Boukhelkhal
The development of sustainable high-performance concrete with improved mechanical and durability properties while incorporating environmentally friendly components is a major concern today. This work investigates the feasibility of using granite industrial waste (GW) as a natural sand substitute by volume (10, 20, 30, and 40%) combined with seashell waste powder (SWP) as a cement substitute by weight (5, 10, and 15%) to improve the durability performance of self-compacting sand concrete (SCSC) against sulphate attack and chloride permeation. The obtained results showed the feasibility of developing eco-friendly SCSC by replacing up to 40% of sand with GW and 15% of cement with SWP, with a significant improvement in compressive strength and durability properties. However, SCSC containing 40% GW and 10% SWP showed the highest compressive strength (63 MPa), a 36.65% increase in electrical resistivity, and a 48.18% decrease in chloride-ion permeability. All SCSC mixes presented electrical resistivity greater than 20 kΩ·cm and chloride-ion passed charge below 2000 C, meeting the requirements for practical engineering applications. Furthermore, the response of the SCSC mix with GW and SWP against sulphate attack was considerably better than that of the control SCSC mix. Finally, the study results in the development of an encouraging and highly resistant concrete to extreme conditions without significant material damage, while reducing the demand for natural aggregates and conventional cement.

25 December 2025 in Buildings
Verified
Journal Article
Open access
PDF file
GLGuermiti laid Laid
Guermiti laid Laid
Mohamed GuendouzMohamed Guendouz
Mohamed Guendouz
DBDjamila Boukhelkhal
Djamila Boukhelkhal
SASouri Abid
Souri Abid
MHMoussa Hadjadj
Moussa Hadjadj
This work contributes to reinforcing cork-based mortar, with the potential of developing a new eco-friendly lightweight mortar for specific structural applications. Thirteen lightweight mortars were produced by adding cork aggregates (CAs) at fractions of 0.30%, 0.60%, and 0.90% of mortar weight. For each level of CA content, three volume fractions of polyethylene fibers (PFs) were added: 0.25%, 0.50%, and 0.75%. The results indicate that lightening mortar with CA considerably reduces its workability, density, mechanical strengths, and thermal conductivity, as well as increasing its porosity. However, adding PFs to the matrix significantly improves the mortar’s flexural strength by up to 26% and reduces its cracking and brittleness. The 28-day compressive strengths of all mortars remain higher than 15 MPa and can be used in the production of structural elements, according to the RILEM recommendations. The thermal conductivity and dry density decreased, respectively, from 1.73 W/m·K and 2050 kg/m3 for the control mixture to 0.73 W/m·K and 1583 kg/m3 for mortar with 0.90% CA and 0.75% PF. The combination of up to 0.90% CA with 0.75% PF demonstrates satisfactory mechanical and thermal properties and is strongly recommended for use in construction across numerous types of mortar, such as screed mortar for repair and flooring.