Joining high strength 2xxx series aluminum is known to be complex and difficult; these alloys are traditionally considered non-weldable for fusion welding. This paper describes details on welding AA2029-T8 for skin-stiffened structures using refill friction stir spot welding (RFSSW). RFSSW is a solid-state process invented in the early 2000s that produces spot welds that are strong, lightweight, flush, and hermetic. Cycle times between 1 and 3 s are discussed, and process forces within a range of 8 to 14 kN are demonstrated. Furthermore, lap-shear quasi-static tensile strengths are shown to be between 10 kN and 12 kN in 9 mm diameter spots. A comparison of the performance of RFSSW welds made with various tool materials—which include H13 tool steel, tungsten carbide, and MP159—is detailed. Comparisons of parameters, weld consolidation, and heat-affected zones are presented with discussion related to heat generation specific to each tool material.
Tool wear is a key issue for the manufacturing performance of refill friction stir spot welding in high-volume manufacturing environments. As such, the aim of this study is to examine conditions in which tungsten carbide with a cobalt binder can succeed as a tool material in the spot welding of 2029 aluminum for a sustained lifetime. Critical factors are shown herein to include cleanliness and thermal management. The life of a WC-Co toolset is demonstrated to be approximately 2998 welds, which is of the same scale as conventional steel tooling. With a WC-Co shoulder and probe, the H13 clamp showed the only significant wear.