Prabin Pathak

Mr. Prabin Pathak

orcid

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications


24 April 2024 in Sustainability
Verified
Journal Article
Open access
PDF file
Rabin LamichhaneRabin Lamichhane
Rabin Lamichhane
GMGokarna Bahadur Motra
Gokarna Bahadur Motra
Thaman Bahadur KhadkaThaman Bahadur Khadka
Thaman Bahadur Khadka
Y.X ZhangY.X Zhang
Y.X Zhang
PPPrabin Pathak
Prabin Pathak
SPShikhar Pandit
Shikhar Pandit
This paper investigates porous concrete and the influence of water level variations and porosity on the mechanical, physical, and hydraulic properties of porous concrete. The effect of different void percentages and various water levels on the properties of porous concrete was studied. Fabricated specimens with targeted porosities of 20% and 25% were subjected to a series of tests to evaluate their compressive strength, hydraulic conductivity (permeability), and porosity. The permeability of the specimens was assessed using a falling head permeameter to ensure effective water percolation. Porosity was quantified through a volumetric method, providing insights into void content. Both cubical and cylindrical specimens were used for all tests, along with compression tests under both air-dried and oven-dried conditions. The results showed that the maximum compressive strength occurred under oven-dried conditions for both cubical (7.05 MPa, 5.58 MPa) and cylindrical (8.36 MPa, 4.81 MPa) specimens, with 20% and 25% porosities, respectively. The compressive strength was found to be low in air-dried samples and increased with higher water levels, peaking at the 40% water level. Furthermore, the porosity exhibited a significant correlation with the reduction in density, affecting the mechanical properties. For the cylindrical and cubical samples, the dry density decreased by 16.03 kg/m3 and 20.85 kg/m3 and the permeability increased by 0.41 mm/s and 0.84 mm/s, respectively, for every 1% increase in porosity. The results showcased the effect of water level variation on porous concrete properties as well as its promising ability to infiltrate water. This promotes the development of sustainable pavement systems by minimizing surface runoff and aiding groundwater recharge.

13 April 2017 in International Journal of Computational Methods
Verified
Journal Article
Closed access
PPPrabin Pathak
Prabin Pathak
YZY. X. Zhang
Y. X. Zhang
XTXiaodan Teng
Xiaodan Teng

1 January 2020
Verified
Book Chapter
Closed access
XLXiaoshan Lin
Xiaoshan Lin
YZY.X. Zhang
Y.X. Zhang
PPPrabin Pathak
Prabin Pathak

1 July 2016 in Applied Mechanics and Materials
Verified
Journal Article
Closed access
PDF file
PPPrabin Pathak
Prabin Pathak
YZYi Xia Zhang
Yi Xia Zhang
A new simple, efficient and accurate finite element model denoted as FEM-B is developed for the analysis of structural behavior of FRP strengthened RC beams with bond-slip effect. Geometric nonlinearity and material nonlinear properties of concrete and steel rebar are accounted for this model. Concrete, steel, FRP and adhesive are modelled as Solid 65, Link 180, Shell181 and Solid 45 respectively. Concrete is modelled using Nitereka and Neal’s model for compression, isotropic and linear elastic model before cracking for tension and strength gradually reduces to zero after cracking, whereas steel is assumed to be elastic perfectly plastic material. The material of FRP is considered to be linearly elastic until rupture, and adhesive is assumed to be linearly elastic. The bond slip between concrete, adhesive and FRP is based on the bilinear law, which is modelled using spring element Combin 39.The developed new finite element model FEM-B is validated against experimental results, and demonstrates to be effective for the structural analysis of FRP strengthened RC beams.