Tetrabromobisphenol A (TBBPA) is a known endocrine disruptor employed in a range of consumer products and has been predominantly found in different environments through industrial processes and in human samples. In this review, we aimed to summarize published scientific evidence on human biomonitoring, toxic effects and mode of action of TBBPA in humans. Interestingly, an overview of various pretreatment methods, emerging detection methods, and treatment methods was elucidated. Studies on exposure routes in humans, a combination of detection methods, adsorbent-based treatments and degradation of TBBPA are in the preliminary phase and have several limitations. Therefore, in-depth studies on these subjects should be considered to enhance the accurate body load of non-invasive matrix, external exposure levels, optimal design of combined detection techniques, and degrading technology of TBBPA. Overall, this review will improve the scientific comprehension of TBBPA in humans as well as the environment, and the breakthrough for treating waste products containing TBBPA.
In the present study, TiO2-montmorillonite (MMT) composites were synthesized hydrothermally under variable conditions, including the TiO2/MMT mass ratio, reaction pH, reaction temperature, and dwelling time. These samples were determined by X-ray photoelectron spectrometry (XPS), ultraviolet–visible spectroscopy% (UV-Vis DRS), electrochemical impedance spectroscopy (EIS), transient photocurrent responses, photoluminescence (PL) spectra, electron paramagnetic resonance (EPR), and N2 adsorption–desorption isotherms. The photocatalytic activity was evaluated as the ability to promote the visible-light-driven degradation of 30 mg/L of aqueous methylene blue, which was maximized for the composite with a TiO2 mass ratio of 30 wt% prepared at a pH of 6, a reaction temperature of 160 °C, and a dwelling time of 24 h (denoted as 30%-TM), which achieved a methylene blue removal efficiency of 95.6%, which was 4.9 times higher than that of pure TiO2. The unit cell volume and crystallite size of 30%-TM were 92.43 Å3 and 9.28 nm, respectively, with a relatively uniform distribution of TiO2 particles on the MMT’s surface. In addition, 30%-TM had a large specific surface area, a strong light absorption capacity, and a high Ti3+ content among the studied catalysts. Thus, the present study provides a basis for the synthesis of composites with controlled structures.