A patented self-tensioning system for long-span wooden structural floors is described that increases the performance of the deflected sections in terms of both resistance and deformation. The system is based on a force multiplier mechanism composed by two connecting rods which are secured to a post-stressing tendon. The mechanical device is activated by the transmission of the load from the structural element to the supports, causing an elongation and stressing the tendon. This transmission comes with a slight vertical displacement of the supports. Throughout this system, the intensity of the tensioning force varies with the applied load; thus, a more favorable bending moment distribution from the load is obtained, and the relative deformations of the different sections of the piece are reduced. This article presents a comparative study of the structural behavior of π-shape cross section wooden structural floors with spans from 9m to 18m, comparing sections with and without pre-stress, and sections with the self-tensioning system
25 November 2022 in Journal of Building Engineering
This study analyzes the performance of wooden structural floors equipped with the self-tensioning system patented by the authors, consisting of a force multiplying mechanism connected to a self-tensioning tendon, which is activated automatically when the load is applied to the structural element. The paper describes the system’s difficulties when the structural floor is subjected to asymmetrical loads. The proposed solution consists of anchoring the tendon by an adhesive connection in the central part of the piece yielding a favorable redistribution of the bending moments and an effective performance in terms of deformations. The comparative study focuses onπ-shape cross section pieces with spans of 12 m and 15 m, using sections without prestressing and with initial prestressing and self-tensioning system.