Chuyang Wang

Dr. Chuyang Wang


Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 May 2019 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Verified
Journal Article
Closed access
WJWanying Jia
Wanying Jia
LXLan Xiao
Lan Xiao
Chuyang WangChuyang Wang
Chuyang Wang
XCXiaoyu Cheng
Xiaoyu Cheng
YYYangguang Yan
Yangguang Yan
Due to the advantages of simple mechanical structure, high reliability, high power density, doubly salient electromagnetic machine (DSEM) has a wide application prospect in many areas. Many driving strategies for DSEM have been developed in recent years, including the standard angle control, the three-state advanced angle control, the six-state advanced angle control, the nine-state advanced angle control, etc. Comparing with standard angle control, the driving strategies with advanced angles can further increase the output torque and reduce torque ripples in medium/high speed region. However, the advanced angles are very difficult to select, and the commonly used field-circuit co-simulation method by enumerating advanced angles consumes a lot of time. Besides, once the working condition changes, the advanced angles should be re-selected. In this paper, a self-tuning control of advanced angles based on several-angle alternating method is proposed, which is carried out by iteratively calculating the advanced angles according to the working condition. The operating principle of the proposed method is analyzed in detail, together with the change pattern of advanced angles and the output characteristics of DSEM. Besides, the implementation method is described, with the upper limitation of advanced angles selected. Finally, the effectiveness and feasibility of the proposed method are verified by field-circuit co-simulations and experiments.

10 January 2018 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
Chuyang WangChuyang Wang
Chuyang Wang
LXLan Xiao
Lan Xiao
HJHuijie Jiang
Huijie Jiang
TCTingting Cai
Tingting Cai
The system time delay is typically neglected in the design of a modular multilevel converter system. However, the system time delay can cause different types of deteriorations, including a decrease in system stability, a weakening of the steady-state performance, and a deceleration of the transient response when the load changes. This study first provides the generation mechanism and classification of the system time delay. Then, a linear model is developed to form the basis of the analysis for the system time delay. Subsequently, an analytical method is used to provide an accurate description of the relation between the system time delay and corresponding deteriorations. Based on the analysis, the optimal design methods of the system controller parameters are proposed to effectively mitigate these deteriorations. Finally, the deteriorations that caused by the system time delay and efficiency of the optimal design methods are demonstrated via experiments.

20 June 2018 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
Chuyang WangChuyang Wang
Chuyang Wang
LXLan Xiao
Lan Xiao
CWChujiao Wang
Chujiao Wang
MXMing Xin
Ming Xin
HJHuijie Jiang
Huijie Jiang
The carrier phase-shift PWM (CPS-PWM) strategy is widely used in modular multilevel converters. However, the PWM delay and modulation frequency ratio, which are typically neglected in the design of the CPS-PWM strategy, are the primary factors that can cause an unbalance phenomenon in the submodules' capacitor voltages and thus deteriorate the system working performance. This study first proposed mechanism of the balance of the capacitor voltage related to the CPS-PWM strategy. A quantitative analysis of the relations between the PWM delay, modulation frequency ratio and unbalance phenomenon is then provided based on the balance mechanism, indicating the root cause of the unbalance phenomenon related to the CPS-PWM strategy. Based on this analysis, the appropriate compensation methods are introduced into the system: an optimal design of the system parameters is used to mitigate the effect of the PWM delay. And an improved balance strategy, which combines the rotations of the carrier waves, the method regulating the phase shift angle, and a state switcher with a balance-time calculator, is used to suppress the effect of a low modulation frequency ratio. The unbalance phenomenon caused by the PWM delay and low modulation frequency ratio, and the efficiency of the compensation methods to balance the capacitor voltage, are finally demonstrated via experiments.

5 November 2015 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
Chuyang WangChuyang Wang
Chuyang Wang
LXLan Xiao
Lan Xiao
XZXinxin Zheng
Xinxin Zheng
LLLinna Lv
Linna Lv
ZXZheng Xu
Zheng Xu
XJXianghua Jiang
Xianghua Jiang
The system time delay, which can be several times greater than the switching period, is typically neglected during the design of a three-phase voltage source rectifier system. As a result, the system time delay can cause different types of deteriorations, including a surge in the ac current, an overshoot in the dc-link voltage, and a decrease in system stability. This study first develops a dc model and linear model to form the basis of the analysis of the relationships between the system time delay and deteriorations. A novel method is then proposed to provide an accurate measurement of the system time delay to improve the efficiency of compensation methods. Based on the analysis and measurement results, two new compensation methods are subsequently proposed to effectively mitigate these deteriorations. The efficiency of the measurement and compensation methods is finally demonstrated via simulations and experiments.

30 January 2020 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
YHYinfeng Hu
Yinfeng Hu
LXLan Xiao
Lan Xiao
CPChen Pan
Chen Pan
JLJinbo Li
Jinbo Li
Chuyang WangChuyang Wang
Chuyang Wang
Due to the significant nonlinearity of the commutation of the square-wave current, the control of the doubly salient electromagnetic motor (DSEM) is hard to analyze quantitatively. This is because the present model is nonlinear and coupled. In this paper, a linear decoupled model and symmetrical frequency shift cluster model are proposed based on a precise analysis of the time-domain and complex frequency domain. The results are extremely simple and mathematically computable. Moreover, these models focus on the average output torque, which is a key parameter at the same time; furthermore, they explain well how torque ripple is generated. Based on the above results, a vector diagram of the harmonics of the phase current and inductance is proposed to precisely control the commutation in theory. Finally, nth-order synchronous reference vector adaptive control is proposed. The phase difference of each order is weighted to obtain the target function, which is proportional to the average output torque. The weighted phase difference is controlled adaptively to reach a maximum to realize the maximum torque per ampere. The theoretical results are verified by a 12/8 pole air-cooled prototype and related simulation and experimental results.

4 February 2020 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Verified
Journal Article
Closed access
XZXinxin Zheng
Xinxin Zheng
LZLe Zhang
Le Zhang
XLXintian Liu
Xintian Liu
YHYao He
Yao He
JSJingkui Shi
Jingkui Shi
Chuyang WangChuyang Wang
Chuyang Wang
The dual-buck inverter (DBI) doesn’t have shoot-through problem thus harmonics caused by the deadtime can be avoided. Besides, the DBI of half-cycle control can reduce inductor current. However, half-cycle control would cause zero-crossing distortion (ZCD). This paper discusses the working principle of DBI and the cause of ZCD. ZCD would lead to grid current distortion, which can be extracted by High Passed Filter (HPF). Therefore, the negative feedback of grid current harmonic components can inhibit ZCD. In this paper, the half-cycle control method without ZCD is proposed. The logic of half-cycle control is analyzed in detail. The ZCD formation process and the inhibition method is given by the quantitative switching model analysis. What’s more, the influence on the control system of the method is discussed. Finally, a simulation model and a prototype of the three-phase DBI have been built to verify the theoretical analysis.