The paper presents an innovative approach implemented in QForm UK Extrusion FEM software to analyse one of the core defects encountered in profile extrusion known as billet skin defect. The validation of the algorithm has been performed based on a number of experimental case studies taken from the literature [1,2]. Additionally, the sensitivity of the accuracy of the results to the variation in initial parameters has been analysed for both types of profile shapes: solid and hollow. Based on this, practical recommendations have been formalised for the successful industrial use of the presented algorithm.
The paper presents the experience of development and implementation of an integrated approach of extrusion simulation with the automated design of the dies as a new way to speed up the technology development and its optimisation based on the QForm UK Extrusion simulation program and QForm Extrusion Die Designer (QExDD) design system. Bearing and prechamber optimisation types are considered for the porthole design. Welding quality and possible streaking lines in the profile are analysed for the tool construction with optimised prechamber contour.
The paper presents a detailed analysis of metal flow inside the extrusion dies and demonstrates the investigation of the formation of underfilling defects. The stress state in the defect zones has been analyzed by means of simulation based on the Eulerian approach. Based on this, it was found that the mean stress (hydrostatic pressure) is not the only parameter that has to be placed into the criterion to get reliable results. The author proposes a new dimensionless underfilling criterion adapted for Eulerian mesh. It is based on analysis of simulation results obtained by QForm Extrusion FEM software [1] and practical experiments for different types of profiles. This criterion has been approved, and critical values have been obtained using a number of industrial projects from different areas of application.
Investigation of heat transfer dependencies in quenching of extrusion profiles based on experiment and FEM simulation KNIAZKIN Ivan, KRYLOV Vladimir, SHITIK
Waving defects in extruded aluminium profiles pose significant challenges to achieving the stringent geometrical tolerances required in industries such as automotive manufacturing. These defects, driven by flow velocity and thermal gradient imbalances, often emerge during later stages of the extrusion process, complicating early detection and mitigation efforts. This study investigates the mechanisms underlying waving defects through comprehensive simulations of industrial and benchmark profiles using QForm UK software. Critical insights into defect formation were achieved by analysing flow velocity and thermal variations across the extrusion process. The results highlight the interplay between feeder plate design, central feeding mechanisms, and billet discard length in influencing velocity deviations and subsequent wave formation. Moreover, the study demonstrates the importance of full-billet simulations in predicting these defects, as simplified approaches often fail to identify critical hidden variables. Practical recommendations are proposed to minimise waving defects and ensure high-quality, defect-free extrusions. These findings offer valuable strategies for advancing extrusion process design and meeting the rigorous demands of modern industries.
Transverse (charge) welds form during billet transitions in aluminium extrusion when incoming material progressively replaces residual metal inside the die, defining the length of extrudate that must be scrapped. This study aimed to quantify charge weld evolution under industrially relevant conditions that are often underestimated in scrap length assessment, including multi-cavity flow imbalance, non-symmetric multi-profile placement, and billet-to-billet thermal stabilisation effects. Three case studies were analysed using finite element simulation in QForm UK: (i) the International Extrusion Benchmark 2023 multicavity die producing three hollow tubes with intentionally varied port and bearing designs, (ii) an industrial two-profile die with translated (non-mirrored) profile positioning to avoid post-extrusion rotation, and (iii) a complex industrial profile extruded over multiple consecutive billets. The benchmark study demonstrated strong agreement between simulation and experimental charge weld evolution for two profiles, supporting the reliability of the predicted cavity-dependent differences driven by port volume. In the translated two-profile configuration, the charge weld cut length required for full purity increased from 1674 mm to 1940 mm (+16.0%), and by +15.9% under the 95% industrial criterion (1458.1 mm vs 1690.7 mm). Billet-to-billet variability was substantial, with charge weld length increasing by +70.1% from the first to the fifth billet (2819.0 mm to 4791.7 mm), before stabilising. Overall, the results show that charge weld length is governed by residence-time differences through ports and flow channels, requiring profile-specific assessment and consideration of process stabilisation. In this context, FE simulation provides an effective means to localise the mixed zone and to support die optimisation strategies aimed at reducing scrap.