This paper studied the effects of powder size on densification, microstructure, and mechanical properties of the hot isostatic‐pressed 2A12 aluminum alloy powder compact. The results show that the near‐fully dense powder compact can be successfully achieved and the smaller the powder is, the higher the relative density is. In addition, as the powder size decreases, the precipitated phases in the powder compact change from continuously point‐like distribution at the junctions among powder particles to the concentrated distribution at the three‐way intersections. Compared with the large powder, the tensile strength, yield strength, and elongation of the compact with the small powder were improved by 14%, 30.8%, and 48.6%, respectively.
Hot isostatic pressing (HIP) is an ideal fabrication technique for products with complex structure, but also a reliable post-treatment method. The individual effect of the HIP or HIP post-treatment (HIPPT) on the mechanical properties of powder compacts have been investigated, but little attention has been paid to their combined effect. In this study, the effect of HIPPT on the densification, microstructure and mechanical properties of HIPed powder compacts were investigated. The relative density shows a regional increase after HIPPT. The interlayer spacing of lamellar α phase is increased, equiaxial grains are coarsened and high-angle grains are decreased. Moreover, an obvious increase in elongation is detected, which demonstrates that HIPPT is beneficial to improve the properties of HIPed powder compacts.