Recently, foam-mat drying is being considered a mild drying technique, requiring low investment costs but being particularly highly effective. This drying method is very useful for liquid or semi-liquid food products that are highly viscous and easily change qualities by heat. Liquid or finely ground foods are foamed with the assistance of surfactants (foam-creating and foam-stabilizing agents are egg albumin and carboxymethyl cellulose, respectively), followed by drying of the foam with hot air. Box-Behnken design (BBD) of response surface methodology (RSM) was designed in this study, with 3 factors and 3 levels, including egg albumin content (6-10%), carboxymethyl cellulose (CMC) (0.1-0.5%) and drying temperature (50-70oC). The drying rate and β-carotene content of foam and product, respectively, are the indicators observed in 18 experimental runs and 6 repetitions at the central point. Use target settings for each response based on high β-carotene content and highest drying rate to produce a high-quality papaya powder product with the shortest drying time. The optimal and feasible experimental conditions for drying foam mats were achieved with albumin concentration, CMC and optimal drying temperature at 9.07%, 0.39% and 62oC, respectively. From these optimal conditions, the optimal values of drying rate and β-carotene content were achieved as 3.41 g water/g dry matter/min and 37.95 µg/g, respectively. This study has confirmed that foam drying is a feasible method to produce good quality papaya powder, the product maintains the natural color of the original material, low moisture (8.5%) and water activity (0.35), and high rehydration ratio (4.05) when drying at 62oC for 3 hours.
Wine is a fermented product of fruit juice. Mulberry and apple juice can also be used to produce wine. Several factors influence the alcoholic fermentation of the must; therefore, the optimization of the mulberry wine fermentation conditions with the dry yeast strain Saccharomyces bayanus (concentration varied from 0.15 to 0.25 g/L), fermentation conditions as pH value (from 3.5 to 4.5), and total soluble solid (TSS) content (24–28°Brix) were performed in this study. To evaluate the influence of these factors, a Box–Behnken design was used to minimize the number of factor combinations required, which allows the determination of optimal fermentation conditions (pH, TSS content, and dry yeast concentration) to produce wines with high alcohol and bioactive compounds (total anthocyanin (TAC) and polyphenol content (TPC)). Based on the analysis of experimental data, the second-order response surface models were developed to describe the relationship between initial pH value, TSS, and dry yeast concentration on wine quality acquisition (ethanol content and bioactive compounds). The results of the analysis of variance (ANOVA) showed that the model setup by response surface quadratic regression was suitable for predicting the wine quality. It was observed that the quality of the apple-fortified mulberry wine was significantly affected by all variables. The optimal contents of ethanol, total anthocyanin, and total polyphenol were achieved at 12.97% (v/v), 171.85 mg/L, and 87.17 mgGAE/L, respectively, when fermented in juice medium with optimal values of pH, TSS, and yeast concentration of 3.9, 26°Brix, and 0.22 g/L, respectively.
About Me
Food Technology
Post-harvest Technology
Human Nutrition
Food Technology
Post-harvest Technology
Human Nutrition