Water pollution is a worldwide environmental and health problem that requires the development of sustainable, efficient, and accessible technologies. Nanotechnology is a very attractive alternative in environmental remediation processes due to the multiple properties that are conferred on a material when it is at the nanometric scale. This present review focuses on the understanding of the structure–physicochemical properties–performance relationships of silver nanoparticles, with the objective of guiding the selection of physicochemical properties that promote greater performance and are key factors in their use as antibacterial agents, surface modifiers, colorimetric sensors, signal amplifiers, and plasmonic photocatalysts. Silver nanoparticles with a size of less than 10 nm, morphology with a high percentage of reactive facets {111}, and positive surface charge improve the interaction of the nanoparticles with bacterial cells and induce a greater antibacterial effect. Adsorbent materials functionalized with an optimal concentration of silver nanoparticles increase their contact area and enhance adsorbent capacity. The use of stabilizing agents in silver nanoparticles promotes selective adsorption of contaminants by modifying the surface charge and type of active sites in an adsorbent material, in addition to inducing selective complexation and providing stability in their use as colorimetric sensors. Silver nanoparticles with complex morphologies allow the formation of hot spots or chemical or electromagnetic bonds between substrate and analyte, promoting a greater amplification factor. Controlled doping with nanoparticles in photocatalytic materials produces improvements in their electronic structural properties, promotes changes in charge transfer and bandgap, and improves and expands their photocatalytic properties. Silver nanoparticles have potential use as a tool in water remediation, where by selecting appropriate physicochemical properties for each application, their performance and efficiency are improved.
The primary objective of this investigation was to synthesize a resin incorporating nanoparticles of hydroxyapatite and silver (HA-NpsAg) to enhance biocompatibility and antimicrobial efficacy, thereby facilitating potential implementation within the dental industry. These enhancements aim to ensure reliable, durable, functional, and aesthetically pleasing restorations while concurrently reducing susceptibility to bacterial colonization within the oral cavity. Hydroxyapatite powders were prepared using the sol–gel method and doped with silver nanoparticles obtained by chemical reduction. The crystalline amorphous calcium phosphate powder had a particle size of 279 nm, and the silver nanoparticles had an average diameter of 26.5 nm. Resin spheres containing HA-NpsAg (RHN) were then synthesized at two concentrations (0.5% and 1%) by dissolving the initial monomer mixture in tetrahydrofuran. Subsequent antimicrobial evaluations were conducted via agar diffusion and turbidimetry, employing three strains of Gram-negative bacteria (E. coli, K. oxytoca, and P. aeruginosa) and three strains of Gram-positive bacteria (S. mutans, S. aureus, and B. subtilis). The findings revealed that P. aeruginosa exhibited maximum susceptibility to RHN powder at a concentration of 0.5%, while RHN powder at 1% concentration demonstrated maximal inhibition against S. aureus and S. mutans. Overall, our study highlights the successful synthesis of a dental resin with hydroxyapatite and silver nanoparticles, exhibiting bactericidal properties at low silver concentrations. These findings hold promise for enhancing dental materials with improved antimicrobial efficacy and clinical performance.
28 February 2017 in International Journal of Research -GRANTHAALAYAH
New nanocomposite membrane was fabricated by electrospinning. The nanocomposite combines a glass and hydroxyapatite (HA). This research proposed the incorporation of glass to counteract the brittleness of HA in a composite formed by coaxial fibers which will be used for bone replacement. Calcium phosphate ceramics are used widely for dental and orthopedic reasons, because they can join tightly through chemical bonds and promote bone regeneration. Precursors HA and SiO2 were synthetized through the sol-gel method and then incorporated into a polymeric PVP matrix; later they were processed by coaxial electrospinning to obtain fibers with an average diameter of 538 nm which were characterized with techniques such as Attenuated Total Reflectance-Fourier Transform Infrared Spectroscopy, Differential Thermal Analysis and Scanning Electron Microscopy. Chemical and physical characterization of the membranes evidenced fibers in a coaxial disposition with a glass core and hydroxyapatite cover. The micro-porous fibers have many potential uses in the repair and treatment of bone defects, drug delivery and tissue engineering. Through ATR-FTIR and SEM-EDX analysis the presence of characteristic chemical groups, the fiber composition and microstructure were determined.
Lithium niobate-silica fibers were produced by the combination of the sol-gel method and the electrospinning technique. Two sol-gel solutions starting from niobium-lithium ethoxide and tetraethyl orthosilicate were prepared and then mixed with polyvinylpyrrolidone; the solutions were electrospun in a coaxial setup. The obtained lithium niobate-silica polymeric fibers were approximately 760 nm in diameter. Raman spectroscopy confirmed the composite composition by showing signals corresponding to lithium niobate and silica. Scanning electron microscopy showed coaxial fibers with a diameter of around 330 nm arranged as a fibrillar membrane at 800 °C. At 1000 °C the continuous shape of fibers was preserved; the structure is composed of silica and lithium niobate nanoparticles within the fibers. The formation of crystalline lithium niobate and amorphous SiO2 phase was also confirmed by XRD peaks.
Surface Enhanced Infrared Absorption Spectroscopy and Surface Enhanced Raman Spectroscopy are analytic techniques that have not been massively adopted since there are issues that still need to be solved with regard to the nature of the signal enhancement substrates used. The sol–gel method for the obtention of ceramics provides an alternative for the production of said substrates. Ceramics are very wear- and heat-resistant, properties that can be used for their regeneration, and through the sol–gel method, ceramics can be produced with high purity as well as can be fashioned in many ways through different techniques, which can be helpful in the pursuit of reproducibility. This paper discusses the different advantages of sol–gel ceramics, their use in the electrospinning technique, and their application in infrared and Raman surface-enhanced spectroscopy.