Speckle, which is a branch of optics that studies the interference pattern caused by the incidence of coherent light in a material’s surface, has some optical techniques and methods that can be successfully applied to determine properties of materials. In this work we used the method called THSP, Time History Speckle Pattern, in samples made of AISI 1020 carbon steel that were submitted to the shielded metal arc welding (SMAW) process, with the objective of identifying (qualitatively) the level of irregularity on its welded surface, by comparing these samples with a default sample, made with the same material. The technique of spekle by reflection was used for data collection. The results showed quantitative diferences between the default welded sample and the other samples, and there are good perspectives that speckle can be applied to determine the quality of the welding process, since the results showed more accuracy than visual inspection.
Here we report the characterization of the photoelastic dispersion coefficient using digital holography with two distinct reconstruction methods: one based on the Fresnel method and the other utilizing convolutional neural networks (CNN). The CNN was trained with reconstruction from the Fresnel method and was able to provide reconstructions with an average Mean Squared Error of 0.006.
This work proposed to determine the mean dispersion factor, < αC > , which is related to the relative photoelastic dispersion coefficient of a photoelastic material, subjected to consecutive external stresses, by means of a direct computational method associated with error theory. An important feature of photoelasticity, related to the light wavelength, is the photoelastic dispersion coefficient, which is determined in traditional methods by indirect statistical processes, as it depends on refractive indices, which are difficult to determine in photoelastic materials. Therefore, finding an alternative form to determine this coefficient is necessary and can help in the processes that involve the use of photoelasticity. The mean dispersion factor obtained was < αC > = (8,90 ± 0,42) x 10-5, which works as a system calibrator to allow the determination of the photoelastic dispersion coefficient of photoelastic materials by photoelasticity, with greater accuracy.
This study contrasts the Speckle intensity curves of soil samples with clay and sand. The technique used was Speckle interferometry and the analysis was the computational method based on the Time History Speckle Pattern, THSP, and Error Theory.
We present a simple optical setup based on two cascaded reflective phase-only spatial light modulators in a $4 f$ configuration to perform basic logic operations in parallel. By adjusting polarization states and encoding binary input patterns as phase masks, we implemented three logic gates (AND, OR, and XNOR) with results consistent with the expected truth tables. The modulation relies on polarizing components to allow pixel-wise control across the entire image. Experimental results show good agreement with the target amplitude distributions and expected results.