Fabio Emiro Serra

Dr. Fabio Emiro Serra


Research Focus & Metrics

Academic Career Length

17Years (2010-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 July 2020 in Energies
Verified
Journal Article
Open access
PDF file
JAJORGE GAITAN AROCA
JORGE GAITAN AROCA
FSFabio Emiro Serra
Fabio Emiro Serra
JCJose Ulises Castellanos Contreras
Jose Ulises Castellanos Contreras
In this paper, the performance of a biomimetic wind rotor design inspired by Petrea Volubilis seed is presented. Experimentation for this rotor is configured as a horizontal axis wind turbine (HAWT) and numerical analysis is done in order to obtain performance curves with the open-source computational fluid dynamics (CFD) software OpenFoam®. Numerical analysis and experimental results are compared for power Coefficient (Cp) and thrust coefficient (CT). The biomimetic rotor analysis is also compared with experimental results exposed by Castañeda et al. (2011), who were the first to develop those experimentations with this new rotor design. Computational fluid dynamics simulations were performed using an incompressible large Edyy simulation (LES) turbulence models with a localized sub-grid scale (SGS) dynamic one-equation eddy-viscosity. A dynamic mesh based on an arbitrary mesh interface (AMI) was used to simulate rotation and to evaluate flow around rotor blades in order to accurately capture the flow field behavior and to obtain global variables that allow to determine the power potential of this wind rotor turbine. This study will show the potential of this new rotor design for wind power generation.

27 August 2024 in Designs
Verified
Journal Article
Open access
PDF file
PRPaula Ramirez
Paula Ramirez
ALAlejandra Sophia Lozano
Alejandra Sophia Lozano
JLJuan José Lozada-Castro
Juan José Lozada-Castro
FSFabio Emiro Serra
Fabio Emiro Serra
CGCarlos Alberto Guerrero-Fajardo
Carlos Alberto Guerrero-Fajardo
Milling pretreatment is a crucial step in the bioconversion of lignocellulosic biomass such sugarcane bagasse because it facilitates access to cellulose for subsequent chemical treatments. However, most experiments have been conducted at the laboratory scale, where it has been identified that high energy is required for the processing of biomass. For this reason, it is proposed to implement the screw extruder technique for the processing of cellulose. This article focuses on the characteristics, types, and applications of milling pretreatment for sugarcane bagasse, with a particular emphasis on its role in lignin removal and the milling design. Milling pretreatment reduces the particle size of lignocellulose biomass through compression shear and tearing mechanisms, which enhances the accessibility of cellulose and hemicellulose to enzymes and chemicals, thereby improving the efficiency of bioconversion processes. Innovative mathematical modeling, a mechanical design in a CAD application, and an FEA analysis of the milling pretreatment equipment are presented, providing insights into the design and optimization of milling pretreatment processes. This article presents an innovative potential system for milling pretreatment in sugarcane bagasse for the production of bioethanol, heat and power, and other value-added products, contributing to a more sustainable and circular economy.

1 May 2010 in Ingeniería e Investigación
Verified
Journal Article
Open access
PDF file
CGCarlos Alberto Guerrero-Fajardo
Carlos Alberto Guerrero-Fajardo
ILIván David Osorio León
Iván David Osorio León
FSFabio Emiro Serra
Fabio Emiro Serra
Problems arising between biofuels and food as raw materials have led to investigating the use of inedible raw materials for their production. This work was aimed at studying the effect of temperature on converting castor oil in biodiesel production. Oil transesterification with methanol was carried out using an alkaline catalyst (0.5% NaOH - water solution) for 1 hour using a 6:1 alcohol/oil molar ratio, at atmospheric pressure and taking temperature as a free variable. The temperature was evaluated at 68°F, 86°F, 104°F and 122°F. The reaction products were analysed by gas chromatography (CG-FID) for quantifying the fatty acid methyl esters (FAME) present. The results showed different dispersion depending on temperature, finding that 122°F resulted in less dispersion than the others. CG-FID analysis showed that most FAME content was reached at 122°F, such temperature giving the highest ricinoleic acid conversion rate. Gas chromatography also revealed that reaction time was adequate, in process conditions, for obtaining ricinoleic acid-based 94.26% conversion.

27 December 2011 in Informador Técnico
Verified
Journal Article
Open access
PDF file
FSFabio Emiro Serra
Fabio Emiro Serra
ASAdriana Fernanda Sierra-Alarcón
Adriana Fernanda Sierra-Alarcón
CFCarlos Alberto Guerrero Fajardo
Carlos Alberto Guerrero Fajardo
En este papel se pretende exponer la revisión realizada a la información existente de Pequeñas Centrales Hidroeléctricas (PCH), concentrando la descripción en tres aspectos: las turbinas más usadas, las características de los generadores y una breve descripción de la legislación colombiana respecto a la pequeña generación. Esta revisión también abarca una corta descripción de los elementos constitutivos y del desarrollo de las PCH en Colombia.

21 December 2013 in Revista Tecnura
Verified
Journal Article
Open access
PDF file
JEJorge Eduardo
Jorge Eduardo
AGArango Gómez
Arango Gómez
IMIngeniero Mecánico
Ingeniero Mecánico
FEFabio Emiro
Fabio Emiro
FSFabio Emiro Serra
Fabio Emiro Serra
VLVladimir Silva Leal
Vladimir Silva Leal
Las metodologías y aplicaciones sobre el uso de la tecnología del biogás aparecen en el mundo en gran parte de las investigaciones científicas so­bre el tema de la eficiencia, la combustión y el control de emisiones en motores de combustión interna (MCI), las cuales han venido desarro­llando en un contexto histórico el mejoramiento de aspectos sociales, económicos y ambientales de Asia, Europa, África y Latinoamérica. En el presente análisis se da una mirada al estado del arte de los motores que trabajan con biogás, te­niendo en cuenta su evolución y aplicaciones cotidianas, y se identifican algunos de los pará­metros de operación y comportamiento de estos equipos que trabajan por combustión mediante ignición por chispa y encendido por compresión. Los resultados que se muestran describen una mejora considerable en su desempeño y mani­fiestan la importancia de continuar profundizan­do en la investigación sobre el uso de biogás en motores de explosión utilizados en la transfor­mación de energía, ya que la demanda energéti­ca actual y la necesidad de optimizar su uso en el ámbito mundial se hacen vitales a la hora de pensar en los parámetros y ajuste del motor que permitan mejorar sus condiciones de desempeño.

1 September 2011 in Ingeniería e Investigación
Verified
Journal Article
Open access
PDF file
SRSantiago Ramírez Rubio
Santiago Ramírez Rubio
FSFabio Emiro Serra
Fabio Emiro Serra
CGCarlos Alberto Guerrero-Fajardo
Carlos Alberto Guerrero-Fajardo
This article describes the fixed bed biomass gasifier operation designed and built by the Clean Development Mechanisms and Energy Management research group, the gasifier equipment and the measurement system. The experiment involved agro-industrial residues (biomass such wood chips, coconut shell, cocoa and coffee husk); some temperatures along the bed, its pressure, inlet air flow and the percentage of carbon monoxide and carbon dioxide in the syngas composition were measured. The test results showed that a fuel gas was being obtained which was suitable for use with an internal combustion engine for generating electricity because more carbon monoxide than carbon dioxide was being obtained during several parts of the operation. The gasification experimentation revealed that a gasifier having these characteristics should be ideal for bringing energy to areas where it is hard to obtain it (such as many rural sites in Latin-America) or other places where large amounts of agro-industrial wastes are produced. Temperatures of around 1,000°C were obtained in the combustion zone, generating a syngas having more than 20% carbon monoxide in its composition, thereby leading to obtaining combustible gas. En este artículo se describe tanto la operación del gasificador de biomasa de lecho fijo, diseñado y construido por el Grupo de Investigación en Mecanismos de Desarrollo Limpio y Gestión Energética, como el equipo en sí y su sistema de medición. Las experimentaciones desarrolladas se han hecho con diversos desechos agroindustriales (biomasas como madera residual y cáscaras de coco, cacao y café), donde se toman mediciones de temperaturas a lo largo del lecho, su presión, el caudal de aire de entrada y el porcentaje de composición de monóxido y dióxido de carbono en el gas de síntesis producido en el proceso. El resultado de las experiencias ha sido la obtención de un gas combustible adecuado para ser introducido en un motor de combustión interna que posteriormente pueda generar energía eléctrica, ya que en varios puntos de la operación se ha obtenido mayor cantidad de monóxido de carbono que de dióxido de carbono. De la experimentación fue posible observar que un equipo de gasificación de estas características es adecuado para llevar energía a lugares que tienen difícil acceso a ésta (como varios sectores rurales de América Latina) o a sitios que produzcan una cantidad importante de desechos agroindustriales. En el proceso se obtuvieron temperaturas, en la zona de combustión, de alrededor de 1.000 °C, con un gas de síntesis que, en su composición, alcanzó a tener porcentajes superiores al 20% en monóxido de carbono, obteniendo de esta forma un gas combustible.