(1) Background: Quality inspection robots are widely used in automated production lines. However, the design cycle is long, iteration costs are high, and algorithm development is challenging. It is difficult to perform effective validation during the design phase. Applying virtual reality technology to simulate quality inspection robot workstations offers a new approach to addressing the issues. (2) Methods: The research creates a simulation platform for quality inspection robot workstations based on a virtual reality architecture. The platform creates an immersive quality inspection robot workstation operation interface and conducts testing of the inspection process, thereby validating the rationality of the quality inspection robot workstation design. Building upon this foundation, we conducted experimental comparisons of various defect detection algorithms. (3) Results: Compared to the traditional YOLOv7 algorithm, the improved YOLOv7 algorithm achieved an 18.1% increase in recognition precision. Experimental results demonstrate that the quality inspection robot workstation simulation platform can be applied to validating workstation design proposals. (4) Conclusions: It has a positive impact on reducing the research and development costs of quality inspection robot workstations and shortening the defect recognition algorithm development cycle.
Background. The coordinate measuring machines have been widely used in aircraft production measurement. However, the current level of intelligence of three coordinate measuring machines is low. Operators need to operate the equipment on site and read the measurement data, which restricts the improvement of detection efficiency. Methods. Applying digital twin technology to remote control of aviation structural component measurement equipment provides a new approach to solving the above problems. A control system for aviation structural component measurement equipment was developed based on digital twin technology. A digital twin of the measurement equipment was constructed in a virtual space, and the digital twin control system was constructed using the virtual real mapping method. Results. The system was tested for virtual real interaction to verify the rationality of the design of the control system for aviation structural component detection equipment, and experiments were conducted on virtual-real interaction communication testing. The experiment results shows that the communication delay is basically the same as the network delay, with an average of 25.1 ms, which can meet the real-time requirements of the digital twin system. Conclusions. The digital twin control system developed in this paper can be applied to remote control of detection equipment, which has a positive significance in shortening detection time and improving system response speed.