Mechano-sensitive hair-like sensilla (MSHS) have an ingenious and compact three-dimensional structure and have evolved widely in living organisms to perceive multidirectional mechanical signals. Nearly all MSHS are iontronic or electronic, including their biomimetic counterparts. Here, an all-optical mechano-sensor mimicking MSHS is prototyped and integrated based on a thin-walled glass microbubble as a flexible whispering-gallery-mode resonator. The minimalist integrated device has a good directionality of 32.31 dB in the radial plane of the micro-hair and can detect multidirectional displacements and forces as small as 70 nm and 0.9 μN, respectively. The device can also detect displacements and forces in the axial direction of the micro-hair as small as 2.29 nm and 3.65 μN, respectively, and perceive different vibrations. This mechano-sensor works well as a real-time, directional mechano-sensory whisker in a quadruped cat-type robot, showing its potential for innovative mechano-transduction, artificial perception, and robotics applications.
Multi-sensor defect detection technology is a research hotspot for monitoring the powder bed fusion (PBF) processes, of which the quality of the captured defect images and the detection capability is the vital issue. Thus, in this study, we utilize visible information as well as infrared imaging to detect the defects in PBF parts that conventional optical inspection technologies cannot easily detect. A multi-source image acquisition system was designed to simultaneously acquire brightness intensity and infrared intensity. Then, a multi-sensor image fusion method based on finite discrete shearlet transform (FDST), multi-scale sequential toggle operator (MSSTO), and an improved pulse-coupled neural networks (PCNN) framework were proposed to fuse information in the visible and infrared spectra to detect defects in challenging conditions. The image fusion performance of the proposed method was evaluated with different indices and compared with other fusion algorithms. The experimental results show that the proposed method achieves satisfactory performance in terms of the averaged information entropy, average gradient, spatial frequency, standard deviation, peak signal-to-noise ratio, and structural similarity, which are 7.979, 0.0405, 29.836, 76.454, 20.078 and 0.748, respectively. Furthermore, the comparison experiments indicate that the proposed method can effectively improve image contrast and richness, enhance the display of image edge contour and texture information, and also retain and fuse the main information in the source image. The research provides a potential solution for defect information fusion and characterization analysis in multi-sensor detection systems in the PBF process.
There are still significant challenges in accurate positioning of optical freeform surfaces on the machine tool and the measurement instrument, due to the high accuracy requirement and their complex shapes. This paper proposes a fiducial-aided on-machine positioning method (FAOPM) that combines the on-machine measurement and off-machine measurement to precisely position optical freeform surfaces during the precision manufacturing cycle including rough machining, fine machining, measurement, and error compensation. The FAOPM makes use of fiducials, which are firstly measured in coordinate measuring machine with nanometric accuracy to generate a fiducial-aided computer aided design (FA-CAD) of the designed optical surface, then the developed on-machine measuring device obtains the accurate positions of the fiducials after remounting in the machining coordinate system. Finally, the relative position of the workpiece is identified so that the associated cutting paths and compensation tool path can be easily generated. Several optical freeform surfaces were experimentally machined to prove the capability of the proposed method. The results indicate that the positions of the workpiece during the precision manufacturing and measurement cycle were precisely achieved and the form accuracy of the optical freeform surfaces was remarkable improved based on the FAOPM.
3 April 2020 in Measurement Science and Technology
Achieving high form accuracy of optical freeform surfaces in machining is extremely difficult due to their geometric complexity. A positioning or repositioning process is necessary for fabricating optical freeform surfaces during the machining and measuring processes. The concept of fiducial-aided calibration and positioning (FACP) has been developed to provide high-precision relative position data among different coordinate frames to minimize the repositioning errors. This paper attempts to establish an uncertainty analysis model to evaluate the uncertainty and reliability of the FACP method. Firstly, two kinds of the most-used configurations of the FACP systems available for carrying out experiments in both machining and measuring machines are designed with consideration of four main factors. Secondly, a linear transforming model is developed to connect different coordinate frames among the machine tool, on-machine measuring system and off-machine measurement instrument with high precision. Hence, all the uncertainties associated with the FACP method are considered, and a modified chi-squared technique is used to identify the relationship between these uncertainties. Experimental work has been conducted on two machine tools with different on-machine probing systems. The results show that the transformation uncertainty is very small in the proposed linear transforming model, while the final accuracy of the FACP system is sensitive to the measurement results obtained from the on-machine measuring system.
Form characterization of a machined optical freeform surface demands accurate alignment of the sampled measured data points on the machined surface, and they are compared with the designed geometry of the surface through positioning. In this paper, a fiducial-aided robust positioning method (FAPM) is developed which attempts to evaluate freeform surfaces with high efficiency and precision. The FAPM method makes use of fiducials as reference datum to form a fiducial-aided computer-aided design (FA-CAD) of the freeform surface which not only establishes an inherent surface feature, but also links the different coordinate systems among design coordinate frame, machine tool, and measurement instrument. To verify the capability of the proposed method, a series of experiments were conducted. Compared with the traditional freeform measurement method (e.g., least squares method), the results indicate that the robustness and accuracy of the measurement is significantly enhanced by the FAPM.
14 April 2023 in IEEE Transactions on Instrumentation and Measurement
Conjunctive multi-freeform surfaces play an important role in many advanced optical systems. The position and posture accuracy of freeform surfaces are the key to system performance. However, there is no effective method of measuring the positions and postures of multiple freeform surfaces. In this study, a conjunctive multi-freeform surface measurement system based on multi-sensors is developed, and a trust region registration based on the least squares method is proposed, with the aim of registering multiple freeform surfaces at different positions and postures. The performance of the proposed system was analyzed and the errors were calibrated. The calculation accuracy of the registration method was within 20 nm at Φ50 mm in terms of root-mean-of-squares (RMS) values. The positioning accuracy of the freeform surface measurement system proved to be 1.2 μm within the area of 120 mm × 120 mm; the related uncertainty was also analyzed. The proposed measurement approach provides a comprehensive solution to optical conjunctive multi-freeform surfaces.