Lately, pyrolysis has attracted significant attention due to its substantial potential for bio-oil production, with the ability to serve as a renewable energy source and/or facilitate the production of valuable chemical compounds. The chemical compounds generated and their amounts are completely influenced by the traits and chemical makeup of the initial biomass. In this work, the catalytic fast pyrolysis of Eucalyptus urograndis canopy was carried out using a pyrolyzer coupled to gas chromatography/mass spectrometry (Py-GC/MS) at different temperatures and in the presence and absence of catalysts. Elemental composition analysis was employed to characterize the chemical composition of the biomass. The results showed a biomass with a carbon percentage of 50.20%, oxygen of 43.21%, and hydrogen of 6.34%, as well as a lower calorific power of 17.51 MJ/kg. The Py-GC/MS analyses revealed the presence of several noteworthy compounds, including acetic acid (C2H4O2) and, in smaller quantities, hydrogen (H2), furfural (C5H4O2), and levoglucosan (C6H10O5). The technical-economic evaluation revealed that the production of acetic acid, furfural, hydrogen, and levoglucosan commands a high market price. Additionally, a single production cycle is anticipated to yield a favorable technical-economic balance, generating approximately USD 466.10 /ton of processed biomass. This outcome is achieved through the process of catalytic fast pyrolysis, where CuO has been identified as the most suitable catalyst.
The search for novel biomasses for uses as alternative fiber sources, similar to Eucalyptus spp. biomass, holds great value and potential for commercial-scale application. This study aims to present the hybrid clones of Corymbia spp. developed by Aperam BioEnergia as potential substitutes for Eucalyptus wood in the market pulp industry. By performing modified kraft pulping and chemical characterization analyses, it was possible to compare the biomass of Eucalyptus spp. with that of Corymbia spp. Comparisons were made by analyzing their respective pulp average growth rate (PAGR) and specific wood consumption (SWC), estimated using a kappa number of 19 ± 1. The results showed that one of the hybrid clones (Corymbia citriodora × Corymbia torelliana - ID 4) had highest PAGR#k19, and lowest SWC than other samples. Clone ID 4 showed lowest value of SWC since, simultaneously presented a higher value of wood basic density and screened yield. Consequently, in agreement with its best results, clone ID 4 had the highest-ranking score, calculated as the PAGR/SWC ratio. This genetic material also showed one of the lowest total lignin content, consequently the highest screening yield. Besides Clone ID 4 showed significantly highest xylan content, among wood samples assessed in this work. For that reason, the ID 4 was the highest-ranked, proving to be an excellent high-performance alternative for forest-industry interface parameters.