In a multi-source permanent magnet synchronous motor (PMSM) drive, three distinct winding structures can be implemented: multi-sector, multi-three-phase, and highly coupled. However, due to variations in the magnetic coupling between windings, their low-frequency DC-link current ripple components differ. This paper presents a method to identify the phenomena associated with each low-frequency harmonic content. Three analytical models are developed for the DC current ripple induced by unbalanced winding, counter-electromotive force (back-EMF) harmonics and aliasing effects, respectively, with the results validated through simulations. Experimental validation is conducted for highly coupled winding drives, demonstrating agreement with the analytical models and simulations. The maximum DC current ripple ratio found in the analytical model, the simulation and the experiments is less than , which is deemed acceptable for motor drive applications.
15 December 2025 in IEEE Transactions on Power Electronics
This article presents a novel data-driven real-time open-circuit fault diagnosis strategy for three-phase inverters, integrating the adaptive sliding window (ASWIN) method with machine learning algorithms, enabling 22 state classifications. In addition to stationary single faults, the proposed approach further targets two fault modes that have received less emphasis in the existing literature: nonstationary single faults and mixed stationary faults. Dynamic adaptation of the sliding window size based on signal characteristics improves diagnostic accuracy across the machine’s entire speed range while reducing latency. A range-based evaluation strategy is proposed to assess the dynamic diagnostic performance when multiple operating states coexist within the same sliding window. First, machine learning models trained on multiscale experimental current data demonstrated robust fault diagnosis under various operating conditions. Second, a dynamic scaling factor for window size calculation was developed, incorporating signal metrics, such as dominant frequency proportion, signal variation rate, and signal-to-noise ratio, enabling real-time adjustment of window sizes based on current information and short-term prediction. Third, offline optimization determines speed-specific parameter combinations, facilitating dynamic self-tuning of ASWIN parameters according to variable machine speed. Experimental results validated the proposed strategy, achieving 97.70% accuracy with a diagnosis time of approximately 60 ms, corresponding to a range of 0.4–2.4 current fundamental periods across a speed range of 200–1200 r/min.
1 January 2026 in IEEE Transactions on Industrial Electronics
This article explores the modeling of inter-turn short circuits (ITSCs) in segmented permanent magnet synchronous machines, with a focus on highly coupled segmentation (HCS) and multisector segmentation (MSS) of its winding. It introduces a specific approach, providing a consistent framework for analyzing this phenomenon when the segmented drive operates in power-sharing mode. The study presents a comprehensive model for analyzing ITSC faults regardless of the segmentation technology implemented. This model is compared with data extracted from an experimental bench designed in the laboratory for this study. The analysis shows an excellent fit of the model to the experiment. Also, the analytical structure implemented enables comparing the impact of power sharing on segmented structures. The main results reveal that, contrary to HCS, MSS configurations exhibit greater sensitivity to power-sharing variations, particularly depending on the degrees of freedom of the segment where ITSC fault occurs.
1 October 2026 in IEEE Transactions on Industrial Electronics