This study introduces an advanced inspection system for manual tool assembly, focusing on defect detection and classification in flex-head ratchet wrenches as a modern alternative to traditional inspection methods. Using a deep learning R-CNN approach with transfer learning, specifically utilizing the AlexNet architecture, the system accurately identifies and classifies assembly defects across similar tools. This study demonstrates how a pre-trained defect detection model for older manual tool models can be efficiently adapted to new models with only moderate amounts of new samples and fine-tuning. Experimental evaluations at three assembly stations show that the AlexNet model achieves a classification accuracy of 98.67% at the station with the highest defect variety, outperforming the R-CNN model with randomly initialized weights. Even with a 40% reduction in sample size for new products, the AlexNet model maintains a classification accuracy of 98.66%. Additionally, compared to R-CNN, it improves average effectiveness by 9% and efficiency by 26% across all stations. A sensitivity analysis further reveals that the proposed method reduces training samples by 50% at 50% similarity while enhancing effectiveness by 13.06% and efficiency by 5.31%.
Seafood fraud, such as mislabeling low-cost rainbow trout as premium salmon, poses serious food safety risks and damages consumer rights. To address this growing concern, this study develops a deep learning-based, smartphone-compatible sensing system for fish meat identification and salmon freshness grading. By providing consumers with real-time, image-based verification tools, the system supports informed purchasing decisions and enhances food safety. The system adopts a two-stage design: first classifying fish meat types, then grading salmon freshness into three levels based on visual cues. An improved DenseNet121 architecture, enhanced with global average pooling, dropout layers, and a customized output layer, improves accuracy and reduces overfitting, while transfer learning with partial layer freezing enhances efficiency by reducing training time without significant accuracy loss. Experimental results show that the two-stage method outperforms the one-stage approach and several baseline models, achieving robust accuracy in both classification and grading tasks. Sensitivity analysis demonstrates resilience to blur and camera tilt, though real-world adaptability under diverse lighting and packaging conditions remains a challenge. Overall, the proposed system represents a practical, consumer-oriented tool for seafood authentication and freshness evaluation, with potential to enhance food safety and consumer protection.
The integrity of product assembly in the precision assembly industry significantly influences the quality of the final products. During the assembly process, products may acquire assembly defects due to personnel oversight. A severe assembly defect could impair the product’s normal function and potentially cause loss of life or property for the user. For workpiece defect inspection, there is limited discussion on the simultaneous detection of the primary kinds of assembly anomaly (missing parts, misplaced parts, foreign objects, and extra parts). However, these assembly anomalies account for most customer complaints in the traditional hand tool industry. This is because no equipment can comprehensively inspect major assembly defects, and inspections rely solely on professionals using simple tools and their own experience. Thus, this study proposes an automated visual inspection system to achieve defect inspection in hand tool assembly. This study samples the work-in-process from three assembly stations in the ratchet wrench assembly process; an investigation of 28 common assembly defect types is presented, covering the 4 kinds of assembly anomaly in the assembly operation; also, this study captures sample images of various assembly defects for the experiments. First, the captured images are filtered to eliminate surface reflection noise from the workpiece; then, a circular mask is given at the assembly position to extract the ROI area; next, the filtered ROI images are used to create a defect-type label set using manual annotation; after this, the R-CNN series network models are applied to object feature extraction and classification; finally, they are compared with other object detection models to identify which inspection model has the better performance. The experimental results show that, if each station uses the best model for defect inspection, it can effectively detect and classify defects. The average defect detection rate (1-β) of each station is 92.64%, the average misjudgment rate (α) is 6.68%, and the average correct classification rate (CR) is 88.03%.
Beef fat injection technology, used to enhance the perceived quality of lower-grade meat, often results in artificially marbled beef that mimics the visual traits of Wagyu, characterized by dense fat distribution. This practice, driven by the high cost of Wagyu and the affordability of fat-injected beef, has led to the proliferation of mislabeled “Wagyu-grade” products sold at premium prices, posing potential food safety risks such as allergen exposure or consumption of unverified additives, which can adversely affect consumer health. Addressing this, this study introduces a smart sensing system integrated with handheld mobile devices, enabling consumers to capture beef images during purchase for real-time health-focused assessment. The system analyzes surface texture and color, transmitting data to a server for classification to determine if the beef is artificially marbled, thus supporting informed dietary choices and reducing health risks. Images are processed by applying a region of interest (ROI) mask to remove background noise, followed by partitioning into grid blocks. Local binary pattern (LBP) texture features and RGB color features are extracted from these blocks to characterize surface properties of three beef types (Wagyu, regular, and fat-injected). A support vector machine (SVM) model classifies the blocks, with the final image classification determined via majority voting. Experimental results reveal that the system achieves a recall rate of 95.00% for fat-injected beef, a misjudgment rate of 1.67% for non-fat-injected beef, a correct classification rate (CR) of 93.89%, and an F1-score of 95.80%, demonstrating its potential as a human-centered healthcare tool for ensuring food safety and transparency.
Phalaenopsis orchids are one of Taiwan’s key floral export products, and maintaining consistent quality is crucial for international competitiveness. To improve production efficiency, many orchid farms outsource the early flask seedling stage to contract growers, who raise the plants to the 2.5-inch potted seedling stage before returning them for further greenhouse cultivation. Traditionally, the quality of these outsourced seedlings is evaluated manually by inspectors who visually detect defects and assign quality grades based on experience, a process that is time-consuming and subjective. This study introduces a smart image-based deep learning system for automatic quality grading of Phalaenopsis potted seedlings, combining computer vision, deep learning, and machine learning techniques to replace manual inspection. The system uses YOLOv8 and YOLOv10 models for defect and root detection, along with SVM and Random Forest classifiers for defect counting and grading. It employs a dual-view imaging approach, utilizing top-view RGB-D images to capture spatial leaf structures and multi-angle side-view RGB images to assess leaf and root conditions. Two grading strategies are developed: a three-stage hierarchical method that offers interpretable diagnostic results and a direct grading method for fast, end-to-end quality prediction. Performance comparisons and ablation studies show that using RGB-D top-view images and optimal viewing-angle combinations significantly improve grading accuracy. The system achieves F1-scores of 84.44% (three-stage) and 90.44% (direct), demonstrating high reliability and strong potential for automated quality assessment and export inspection in the orchid industry.
Multifocal glasses are a new type of lens that can fit both nearsighted and farsighted vision on the same lens. This property allows the glass to have various curvatures in distinct regions within the glass during the grinding process. However, when the curvature varies irregularly, the glass is prone to optical deformation during imaging. Most of the previous studies on imaging deformation focus on the deformation correction of optical lenses. Consequently, this research uses an automatic deformation defect detection system for multifocal glasses to replace professional assessors. To quantify the grade of deformation of curved multifocal glasses, we first digitally imaged a pattern of concentric circles through a test glass to generate an imaged image of the glass. Second, we preprocess the image to enhance the clarity of the concentric circles’ appearance. A centroid-radius model is used to represent the form variation properties of every circle in the processed image. Third, the deviation of the centroid radius for detecting deformation defects is found by a slight deviation control scheme, and we gain a difference image indicating the detected deformed regions after comparing it with the norm pattern. Fourth, based on the deformation measure and occurrence location of multifocal glasses, we build fuzzy membership functions and inference regulations to quantify the deformation’s severity. Finally, a mixed model incorporating a network-based fuzzy inference and a genetic algorithm is applied to determine a quality grade for the deformation severity of detected defects. Testing outcomes show that the proposed methods attain a 94% accuracy rate of the quality levels for deformation severity, an 81% recall rate of deformation defects, and an 11% false positive rate for multifocal glass detection. This research contributes solutions to the problems of imaging deformation inspection and provides computer-aided systems for determining quality levels that meet the demands of inspection and quality control.