In-wheel direct drive (IWDD) of electric vehicles (EVs), which simplifies the transmission system and facilitates flexible control of vehicle dynamics, has evolved considerably in the EV sector. This paper proposes a novel double-stator double-rotor motor (DSDRM) with a bidirectional flux modulation effect for in-wheel direct drive of EVs. With the proposed special design, a synthetic-slot structure with synthetic materials containing copper and permanent magnets (PMs) in the slots of the motor is ingeniously employed, and the outer and inner rotors are mechanically connected together as a single rotor, making its mechanical structure less complicated than those of two-rotor machines. The main work of this paper involves the design, analysis, construction, and testing of the proposed machine. The DSDRM with a synthetic-slot structure was demonstrated to be feasible by finite element analysis (FEA), prototype fabrication, and experimental results. In addition, vehicle layout with DSDRM is presented and verified by the vehicle road test experiment. Thus, the DSDRM with the synthetic-slot structure can be used as a hub motor for in-wheel direct drive of EVs.

With the continuous development of machines, various structures emerge endlessly. In this paper, a novel 6-stator-coils/17-rotor-teeth (6/17) E-shaped stator tooth flux switching permanent magnet (FSPM) machine is introduced, which has magnets added in the dummy slots of the stator teeth. This proposed machine is parametrically designed and then compared with the conventional 6/17 E-shaped stator tooth FSPM machine through finite element method (FEM) analysis. Then, combined with the results of FEM, the performance of two machines is evaluated, such as electromagnetic torque, efficiency, back electromotive force (back-EMF). The final results show that this novel 6/17 FSPM machine has greater output torque and smaller torque ripple.

The four-switch three-phase inverters have become an effective approach for fault-tolerant reconstruction and operation of the six-switch three-phase topology. However, the conventional control strategy for four-switch three-phase inverters can result in a large number of current harmonic components, high electromagnetic acoustic noise, and electromagnetic interference (EMI). Therefore, this paper proposes a random switching frequency pulse width modulation method under the centrosymmetry period with a two-state Markov chain based on four-switch three-phase inverters (RSFPWM-CPTMC). In this method, random numbers are optimized and evenly distributed on both sides of the center frequency within a specific frequency bandwidth range, which significantly reduces the current harmonics and EMI at the switching frequency and frequency multiplication. The spectral characteristics generated by the random switching frequency under the centrosymmetry period with the two-state Markov chain are evaluated and compared to that provided by the traditional fixed switching frequency pulse width modulation (FSFPWM). Simulations and experiments are carried out to illustrate the superiority of the proposal.

In this paper, a new permanent magnet (PM) linear motor is proposed. This motor has a special structure with complementary stator flux, which helps to reduce the flux leakage and improve the utilization of the PM. The PMs are installed in a leaning manner, which increases the effective area of the PMs and enhances the field excitation. Hence, the force density of the motor can be improved and it will be, especially suitable for applications within a limited space. The motor structure and working principle are first explained. The design of the motor is then comprehensively investigated. An electromagnetic optimization method based on tabu search algorithm and finite-element method is proposed for the motor to improve its force density.

A separate-stator modular machine with biased flux is proposed in this paper. In this machine, the windings and the permanent magnets are located in two separate parts of the stator, which favors the heat dissipation and magnetic saturation reduction of the machine. With the specially designed stator structure, a biased flux can be introduced to flexibly regulate the excitation field by injecting a zero-sequence current into the phase windings, so that a wide operation speed range can be achieved. Moreover, a modular structure is adopted to simplify the automated manufacture assembly. In this paper, the machine configuration and the working principle are first illustrated. The effect of the design parameters on its torque capability is then investigated. A coupled electromagnetic-thermal optimization method based on the genetic algorithm and finite-element method is proposed to improve the torque performance of the machine.

In this paper, a permanent magnet (PM) linear memory machine is proposed for ocean wave power generation. A notable feature of this machine is its online tunable mnemonic flux. This enables it to operate efficiently in a wide speed range and makes it suitable for the variable-speed wave-power generation. Moreover, this machine has both the PMs and the windings arranged in its stator so that it does not need slip rings or brushes. The proposed machine is also robust and cost-effective because it has a simple translator of slotted steel. In this paper, the configuration and working principle of the linear memory machine are firstly introduced. The results of a parametric analysis are presented to investigate the effects of the proposed machine’s geometric parameters. The performance of the proposed machine is then analyzed using time-stepping finite element method (TS-FEM).