Krishnendu Bera

Dr. Krishnendu Bera

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 September 2023 in IEEE Access
Verified
Journal Article
Open access
KBKrishnendu Bera
Krishnendu Bera
RPRajendran Parthiban
Rajendran Parthiban
Nemai Chandra KarmakarNemai Chandra Karmakar
Nemai Chandra Karmakar
Camera based visible light positioning (VLP) can be promising for indoor positioning applications powered by the widespread use of light emitting diodes (LEDs) in lighting applications. Though camera based indoor positioning using the rolling shutter effect, offers high accuracy, its reliability at long distances and robustness against the line of sight (LOS) blockage are still questionable. In this paper, a low resolution, high frame rate camera is used for an indoor positioning system with centimeter-scale accuracy. Direct detection has been utilized instead of the rolling shutter effect making the system more reliable. The real-time height of the ceiling and the orientation of the receiver are also considered to make the three dimensional (3D) positioning possible in practical use case scenarios. A low cost light detection and ranging (LIDAR) sensor has been used to measure the height of the ceiling in real time to estimate the location in 3D space using a single LED transmitter. A gravity virtual sensor has been used to compensate for the error caused by the tilt of the smartphone. The average 3D positioning error in the proposed VLP system is 6.8 cm. The positioning latency of the proposed system is 54 ms. To the best of the Authors’ knowledge, this is the first reported truly 3D VLP system that works without any prior knowledge of the ceiling height and irrespective of LED shape, size, and arrangement using a single LED. The proposed system is robust against any partial light blockage by the user’s body and it can also provide coarse location information without any direct LOS between the LED and the camera using reflected lights from the surroundings.

26 May 2024 in Photonics
Verified
Journal Article
Open access
PDF file
KBKrishnendu Bera
Krishnendu Bera
Nemai Chandra KarmakarNemai Chandra Karmakar
Nemai Chandra Karmakar
The field of view (FOV) is an important parameter of a visible light communication (VLC) receiver. A variable FOV can be useful to mitigate interference from neighboring cells in a multi-cell VLC network. The existing works on dynamic FOV VLC receivers have used a mechanical iris to control the receiver’s FOV, making the VLC receiver bulky, slow, and power-consuming. In this article, an electronically controlled variable focus liquid lens is used to vary the FOV of the receiver dynamically. A low-cost microcontroller-based feedback control system controls the effective FOV of the receiver to reject signals from unwanted transmitters, thus maximizing the signal-to-interference plus noise ratio (SINR) of the received signal. Experimental results show that the proposed technique effectively improves SINR performance in a multi-cell VLC network. To the best of the authors’ knowledge, this is the first reported work to utilize an electronically controlled compact liquid lens for designing a dynamic FOV VLC receiver.

1 November 2023 in IEEE Access
Verified
Journal Article
Open access
KBKrishnendu Bera
Krishnendu Bera
RPRajendran Parthiban
Rajendran Parthiban
Nemai Chandra KarmakarNemai Chandra Karmakar
Nemai Chandra Karmakar
A combination of a blue laser diode (LD) and a warm white light emitting diode (LED) has been used for indoor lighting and visible light communications (VLC). Contrary to LD and phosphor based white lighting communication, no blue LD power is lost due to phosphor conversion. As a result, a longer communication distance has been achieved. The laser beam is diffused in a hat-top profile by an engineered diffuser in such a way that the received signal strength remains flat over a large area, thus improving the coverage area of the communication system. The experiment demonstrates a 1.7 Gbits/s communication speed over a distance of 1.85 m keeping bit error rate (BER) below 2.8 × 10 -3 over a large area. The coverage area has been improved by 238% to 2.27m 2 using the hat-top diffuser from 0.95m 2 for a phosphor diffuser. This is the largest reported coverage area for the achieved VLC speed at 1.85 m distance to the best of the authors’ knowledge. A correlated color temperature (CCT) of 2952 and a color rendering index (CRI) of 86 have been achieved and the blue light exposure has been kept under the permitted limit. As the radiation standards for eye safety are more relaxed for the infrared (IR) spectrum compared to the visible spectrum, a near-IR LD has been utilized to achieve higher data rates. A data rate of 2.55 Gbits/s has been achieved using the near-IR LD and the proposed diffuser for the same coverage area and distance.

7 November 2024 in IEEE Access
Verified
Journal Article
Open access
MFMd Jahid Faruki
Md Jahid Faruki
KBKrishnendu Bera
Krishnendu Bera
RPRajendran Parthiban
Rajendran Parthiban
Nemai Chandra KarmakarNemai Chandra Karmakar
Nemai Chandra Karmakar
Fiber-based optical antennas are useful for efficient light reception at the receiver in visible light communication (VLC) systems. It combines the principles of fiber optics and antenna technology to achieve high-speed wireless communication. These antennas serve as the interface between the free-space optical channel and the photo-detector (PD), allowing efficient light coupling onto the PD. In this paper, fluorescent optical fiber antennas are designed by combining multiple short length fibers parallelly to increase the collection of light at the receiver end of VLC system. Two different types of fluorescent optical fibers, namely R-3 fibers and YS-2 fibers are used in the VLC system. Each type of these two fibers is used to create one single stage antenna. Also, a dual stage fluorescent fiber antenna is made by combining both YS-2 and R-3 fibers. The communication performances of single and dual-stage antennas are compared. It is found that the single stage fiber antenna performs better, contrary to intuition. The single-stage YS-2 fiber-based antenna has exhibited higher efficiency, achieving a data rate of 120 Mbps at a distance of 10 cm, surpassing the performance of the single stage R-3 fiber-based antenna (60 Mbps) and the dual-stage antenna (36 Mbps). The drop in data speed for dual-stage fiber antenna is attributed to lower received signal power, which arises from inefficient light coupling at the fiber to fiber interface. The light coupling from the first stage fibers to the second stage fibers is inefficient, which leads to reduced light output from the second stage fibers onto the PD. As a result, despite having a larger active area, dual-stage antennas fail to perform better in our experiments. So, dual-stage fiber antennas do not guarantee better performance.

5 June 2024 in Photonics
Verified
Journal Article
Open access
PDF file
MFMd Jahid Faruki
Md Jahid Faruki
KBKrishnendu Bera
Krishnendu Bera
Nemai Chandra KarmakarNemai Chandra Karmakar
Nemai Chandra Karmakar
Light-emitting diodes (LEDs) with high modulation bandwidth are required for high-speed visible light communication applications. Crystal orientation in the GaN LED structure plays a key factor in its modulation bandwidth as the recombination lifetime is highly dependent on crystal orientation owing to the Quantum-Confined Stark Effect (QCSE). In this study, six different crystal orientation multi-quantum well (MQW) GaN LEDs are simulated to understand the impact of heterostructure orientation on modulation bandwidth, radiative recombination rates, and emission intensity. The results of this study demonstrate that semi-polar 101¯3¯ MQW LEDs provide the highest bandwidth in the current density range of 9–20 kA/cm2 compared to the other five orientations. For instance, the semi-polar 101¯3¯-based LED offers a modulation bandwidth of 912.7 MHz at 20 kA/cm2 current density. These results suggest that the semi-polar 101¯3¯ orientation-based LED has the potential to support a high-speed visible light communication system.

1 November 2019
Verified
Conference Paper
Closed access
KBKrishnendu Bera
Krishnendu Bera
MBMasuduzzaman Bakaul
Masuduzzaman Bakaul
Nemai Chandra KarmakarNemai Chandra Karmakar
Nemai Chandra Karmakar
High peak to average power ratio (PAPR) is a problem in orthogonal frequency division multiplexing (OFDM) based communication systems. High PAPR introduces nonlinearity due to limited dynamic ranges of analog components. In case of visible light communication (VLC) it is more severe due to limited working range of light emitting diodes (LEDs). Clipping is often the simplest way to solve this problem. But it comes at a price of added clipping noise component to the signal. Clipping noise restricts the minimum attainable bit error rate (BER). A meta-data based semi-deterministic time domain approach is studied to reduce the clipping noise at the receiver. Simulation results show that clipping noise can be reduced with a simple algorithm compromising data rate by a small margin. The proposed algorithm can be applied without any restrictions on the OFDM parameters.