This research explored the impact of four different electrolytes on the orientation of cellulose nanocrystals (CNCs) in shear-cast films prepared from aqueous CNC gels. Changes in the aqueous CNC gels’ rheological properties with electrolyte addition were correlated to the orientation and optical properties of dried CNC films. Film alignment was qualitatively assessed using cross-polarized optical microscopy and quantified by order parameters computed by UV–Vis transmission spectroscopy. Electrolyte addition resulted in an increased alignment in dried CNC films. For pure CNCs, the film order parameters remained constant at approximately 0.3 for shear rates from 20 s−1 to 100 s−1. However, higher order parameters were achieved in the presence of electrolytes. Notably, an order parameter of 0.88 was achieved at a shear rate of only 20 s−1. In addition, films produced from dispersions containing electrolytes exhibited improved clarity and haze. The results of this work highlight that electrolyte addition can enable higher order parameters at lower shear rates and facilitate the development of aligned CNC films for applications such as polarizers, clear coatings, and piezoelectric materials. Graphical abstract
The objective of the study was to prepare self-assembled transparent cellulose nanocrystal (CNC) films utilizing freeze–thaw technique. To date, self-assembled transparent CNC solid film can be obtained through chemical doping. Here, an easy alternative route was demonstrated to produce such film without chemical modification. It was found that the freeze–thaw method completely eliminated the chiral nematic structure, resulting in completely transparent films without structural color. Detailed internal structure characterization using SEM, XRD, and UV–Vis spectroscopy coupled with optical property analysis revealed a remarkable improvement in the clarity and sharpness of freeze–thaw based CNC films without compromising transmittance and haze, showing promise of freeze–thaw based CNC films in packaging and coating applications. Graphical abstract
This study focused on utilizing cellulose nanocrystal (CNC)–polyvinyl alcohol (PVA) composite in optical sensor applications to detect high humidity conditions and determine water concentration in ethanol. We focused on the composite’s effectiveness in moisture absorption to demonstrate visual color change. We demonstrated that the different molecular weights of PVA significantly affect CNC’s chiral nematic structure and moisture absorption capability. PVA with molecular weight 88 k–97 k exhibited the disintegration of its chiral nematic structure at 30 wt%, whereas low molecular weight PVA (n~1750) showed no structural disintegration even at 100 wt% concentration when analyzed through UV-Vis spectroscopy. Further, the thermal crosslinking of the CNC-PVA composite showed no significant loss of moisture sensitivity for all molecular weights of the PVA. We observed that the addition of PVA to the sulfated CNC obtained from sulfuric acid hydrolysis did not facilitate moisture absorption significantly. A CNC-PVA sensor was developed which can detect high humidity with 2 h. of exposure time. 2,2,6,6-tetramethylpiperidin-1-piperidinyloxy oxidized CNC (TEMPO-CNC) having carboxylic functionality was also used to prepare the CNC-PVA composite films for comparing the effect of functional groups on moisture sensitivity. Finally, we demonstrated a facile method for utilizing the composite as an optical sensor to detect water concentration in ethanol efficiently; thus, it can be used in polar organic solvent dehydration applications.
25 August 2025 in International Journal of Biological Macromolecules
This research investigated the combined effects of electrolyte addition and mechanical shearing on the alignment, optical properties, and rheological characteristics of cellulose nanocrystal (CNC) films. Changes in aqueous CNC gels’ rheological properties due to electrolyte addition were correlated to the properties of the dried films. The alignment in dried CNC films was measured using the order parameter computed by UV-Vis transmission spectroscopy and qualitatively through cross-polarized optical microscopy. In the absence of electrolytes, a single stroke of mechanical shearing at a shear rate of 100 s-1 is insufficient to significantly align CNC in CNC gel. However, the addition of electrolytes improves the alignment of CNC, resulting in an increase of order parameters, such as from 0.31 to 0.88 for NaCl addition, even at a lower shear rate of 20s-1. This work shows the addition of electrolytes combined with mechanical shearing is a more effective approach to tuning CNC alignment to produce transparent and less hazy CNC films from CNC gel.