Among all the possible options to define the seismic input for structural analysis, natural recordings are emerging as the most attractive. Easily accessible waveform databases are available and evidence shows that only a relatively limited number of criteria has to be considered in selection and scaling to get an unbiased estimation of seismic demand. Like many codes worldwide, Eurocode 8 (EC8) allows the use of real ground-motion records for the seismic assessment of structures. The main condition to be satisfied by the chosen set is that the average elastic spectrum does not underestimate the code spectrum, with a 10% tolerance, in a broad range of periods depending on the structure's dynamic properties. The EC8 prescriptions seem to favour the use of spectrum-matching records, obtained either by simulation or manipulation of real records. The study presented herein investigates the European Strong-Motion Database with the purpose of assessing whether it is possible to find real accelerogram sets complying with the EC8 spectra, while accounting for additional constraints believed to matter in the seismic assessment of buildings, as suggested by the current best practice. Original (un-scaled) accelerogram sets matching EC8 criteria were found, for the case of one-component (P-type) and spatial sets (S-type), for the spectra anchored to the Italian peak acceleration values. The average spectra for these sets tend to be as close as possible to the code spectrum. Other sets, requiring scaling, have been found to match the non dimensional (country-independent) EC8 spectral shape. These sets have also the benefit of reducing, in respect to the un-scaled sets, the record-to-record variability of spectra. Combinations referring to soft soil, stiff soil, and rock are presented here and are available on the internet at http://www.reluis.it/

This paper details the findings of an experimental program that assessed the seismic performances of a novel low-cost base isolation device. The proposed bearings are referred to as recycled rubber–fiber-reinforced bearings (RR-FRBs). Devices composed of a low-cost recycled elastomer and reinforced with fiber sheets were manufactured and tested. The main revolutionary concepts investigated in this study are as follows: low-performance elastomers can be used to produce rubber isolators, and vulcanization can be prevented by bonding different layers with an elastic compound. This study addresses all design and technical aspects related to the implementation of the proposed base isolation system. Shaking table tests showed a significant improvement in the seismic performance of an RR-FRB isolated building with respect to a corresponding fixed-base structure. Copyright © 2014 John Wiley & Sons, Ltd.