The application of microfluidic technology to manipulate cells or biological particles is becoming one of the rapidly growing areas, and various microarray trapping devices have recently been designed for high throughput single-cell analysis and manipulation. In this paper, we design a double-slit microfluidic chip for hydrodynamic cell trapping at the single-cell level, which maintains a high capture ability. The geometric effects on flow behaviour are investigated in detail for optimizing chip architecture, including the flow velocity, the fluid pressure, and the equivalent stress of cells. Based on the geometrical parameters optimized, the double-slit chip enhances the capture of HeLa cells and the drug experiment verifies the feasibility of the drug delivery.
A yttrium-stabilised zirconia (YSZ) coating was prepared on Ti–6Al–4 substrates by electron beam physical vapour deposition (EB-PVD). The effect of substrate temperature and beam intensity on the microstructure of the coating was researched. Damping characteristics of the coatings under different processing parameters were compared. The microstructure and crystal structure were determined with scanning electron microscope (SEM) and X-Ray Diffraction (XRD), respectively. The damping properties of the coating were measured by dynamic mechanical analyzer (DMA). The decrease in the substrate temperature leads to diminution of the grain size of coating, which increases the loss factor ( Q−1). The crystal defects and micro-cracks of the coating are also the main reasons for the improvement of the damping performance.
NiCrAlY coating was prepared on a stainless steel substrate by an arc ion plating machine and the annealing experiments were carried out at different temperatures using a tube furnace. The effects of annealing temperatures on the morphology, structure, chemical composition and phase structure of the coating were characterized by SEM, EDS and XRD, respectively. The change of microstructure is discussed. Dynamic mechanical analyzer results determined the suitable annealing temperature for the best damping performance. The effect of annealing temperature on the microstructure and damping properties of NiCrAlY coating are also discussed. The relationship between annealing temperature and damping properties are explained by microstrcuture, grain size and phase structure.