Ningbo Zhao

Dr. Ningbo Zhao

College of Power and Energy Engineering, Harbin Engineering University, Harbin 150001, China

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 April 2019 in Energies
Verified
Journal Article
Open access
PDF file
SLShizheng Liu
Shizheng Liu
NZNingbo Zhao
Ningbo Zhao
JZJianguo Zhang
Jianguo Zhang
NZNingbo Zhao
Ningbo Zhao
ZLZhiming Li
Zhiming Li
HZHongtao Zheng
Hongtao Zheng
Reliable ignition is critical for improving the operating performance of modern combustor and gas turbines. As an alternative to the traditional spark discharge ignition, plasma assisted ignition has attracted more interest and been shown to be more effective in increasing ignition probability, accelerating kernel growth, and decreasing ignition delay time. In this paper, the operating characteristic of a typical self-designed plasma ignition system is investigated. Based on the optical experiment, the plasma jet flow feature during discharge is analyzed. Then, a detailed numerical study is carried out to investigate the effects of different plasma parameters on ignition enhancement of a one can-annular combustor used in gas turbines. The results show that plasma indeed has a good ability to expand the ignition limit and decrease the minimum ignition energy. For the studied plasma ignitor, the initial discharge kernel is not a sphere but a jet flow cone with a length of about 30 mm. Besides, the numerical comparisons indicate that the additions of plasma active species and the increases of initial energy, plasma jet flow length and discharge frequency can benefit the acceleration of kernel growth and flame propagation via thermal, kinetic and transport pathways. The present study may provide a suitable understanding of plasma assisted ignition in gas turbines and a meaningful reference to develop high performance ignition systems.

29 October 2019 in Applied Sciences
Verified
Journal Article
Open access
PDF file
HZHongtao Zheng
Hongtao Zheng
SLShizheng Liu
Shizheng Liu
NZNingbo Zhao
Ningbo Zhao
XCXiang Chen
Xiang Chen
XJXiongbin Jia
Xiongbin Jia
ZLZhiming Li
Zhiming Li
Ignition position is an important factor affecting flame propagation and deflagration-to-detonation transition (DDT). In this study, 2D reactive Navier–Stokes numerical studies have been performed to investigate the effects of ignition position on hot jet detonation initiation. Through the stages of hot jet formation, vortex-flame interaction and detonation wave formation, the mechanism of the hot jet detonation initiation is analyzed in detail. The results indicate that the vortexes formed by hot jet entrain flame to increase the flame area rapidly, thus accelerating energy release and the formation of the detonation wave. With changing the ignition position from top to wall inside the hot jet tube, the faster velocity of hot jet will promote the vortex to entrain jet flame earlier, and the DDT time and distance will decrease. In addition, the effect of different wall ignition positions (from 0 mm to 150 mm away from top of hot jet tube) on DDT is also studied. When the ignition source is 30 mm away from the top of hot jet tube, the distance to initiate detonation wave is the shortest due to the highest jet intensity, the DDT time and distance are about 41.45% and 30.77% less than the top ignition.

11 October 2019 in Applied Sciences
Verified
Journal Article
Open access
PDF file
SCSun Chengwen
Sun Chengwen
HZHongtao Zheng
Hongtao Zheng
ZLZhiming Li
Zhiming Li
NZNingbo Zhao
Ningbo Zhao
LQLei Qi
Lei Qi
HGHongbo Guo
Hongbo Guo
In this study, three-dimensional numerical studies have been performed to investigate the performance of a rotating detonation combustor with a diverging nozzle downstream. The effects of a diverging nozzle on the formation and propagation process of a detonation wave and typical flow field parameters in a rotating detonation combustor are mainly discussed. The results indicate that the diverging nozzle downstream is an important factor affecting the performance and design of a rotating detonation combustor. The diverging nozzle does not affect the formation and propagation process of the rotating detonation wave, while the time of two key wave collisions are delayed during the formation process of the detonation wave. With increases of the diverging angle, the rotating detonation combustor with the diverging nozzle can still maintain a certain pressure gain performance. Both the diverging nozzle and diverging angle have great influence on the flow field parameters of the rotating detonation combustor, including reducing the high pressure and temperature load, making the distribution of the outlet parameters uniform, and changing the local supersonic flow at the outlet. Among them, the outlet static pressure is reduced by up to 88.32%, and the outlet static temperature is reduced by up to 32.12%. This evidently improves the working environment of the combustor while reducing the thermodynamic and aerodynamic loads at the outlet. In particular, the diverging nozzle does not affect the supersonic characteristics of the outlet airflow, and on this basis, the Mach number becomes coincident and enhanced.

22 November 2024 in Journal of Engineering for Gas Turbines and Power
Verified
Journal Article
Closed access
PDF file
XSXiaofeng Shao
Xiaofeng Shao
NZNingbo Zhao
Ningbo Zhao
WZWei Zhang
Wei Zhang
HZHongtao Zheng
Hongtao Zheng
In this study, n-decane/air two-phase rotating detonation is numerically investigated based on Eulerian–Lagrangian method. Three-dimensional rotating detonation chamber (RDC) with various numbers of fuel orifices (30, 45, 60, and 90) is considered. The effects of numbers of fuel orifices on the fuel-mixing characteristics, the flow field structures, and the propagation characteristics of the rotating detonation wave (RDW) are analyzed. The results show that the liquid fuel mixing is influenced by the fuel jets and the incoming air shear. The former mainly affects the mixing uniformity, while the latter has a great influence on the Sauter mean diameter. Specifically, increasing the numbers of fuel orifices improves the mixing uniformity but slightly rises the Sauter mean diameter. Besides, the number of fuel orifices has a significant impact on the propagation mode of RDW. Single-wave mode is established in RDC except for the 30 orifices. Furthermore, a dimensionless kinematic parameter (α) is used to represent the fuel reactivity and predict the propagation mode of RDW. Moreover, the propagation parameters of RDW vary greatly with different numbers of fuel orifices. As the number of orifices increased, the formation time to stable operation of RDW decreases. The research results can provide guidance for the design of two-phase rotating detonation engine (RDE).

18 August 2015 in Journal of Engineering for Gas Turbines and Power
Verified
Journal Article
Closed access
PDF file
NZNingbo Zhao
Ningbo Zhao
XWXueyou Wen
Xueyou Wen
SLShuying Li
Shuying Li
Coolant is one of the important factors affecting the overall performance of the intercooler for the intercooled (IC) cycle marine gas turbine. Conventional coolants, such as water and ethylene glycol, have lower thermal conductivity which can hinder the development of highly effective compact intercooler. Nanofluids that consist of nanoparticles and base fluids have superior properties like extensively higher thermal conductivity and heat transfer performance compared to those of base fluids. This paper focuses on the application of two different water-based nanofluids containing aluminum oxide (Al2O3) and copper (Cu) nanoparticles in IC cycle marine gas turbine intercooler. The effectiveness-number of transfer unit method is used to evaluate the flow and heat transfer performance of intercooler, and the thermophysical properties of nanofluids are obtained from literature. Then, the effects of some important parameters, such as nanoparticle volume concentration, coolant Reynolds number, coolant inlet temperature, and gas side operating parameters on the flow and heat transfer performance of intercooler, are discussed in detail. The results demonstrate that nanofluids have excellent heat transfer performance and need lower pumping power in comparison with base fluids under different gas turbine operating conditions. Under the same heat transfer, Cu–water nanofluids can reduce more pumping power than Al2O3–water nanofluids. It is also concluded that the overall performance of intercooler can be enhanced when increasing the nanoparticle volume concentration and coolant Reynolds number and decreasing the coolant inlet temperature.

14 February 2020 in Applied Sciences
Verified
Journal Article
Open access
PDF file
SJShan Jin
Shan Jin
QMQingyang Meng
Qingyang Meng
ZLZhiming Li
Zhiming Li
NZNingbo Zhao
Ningbo Zhao
HZHongtao Zheng
Hongtao Zheng
JYJialong Yang
Jialong Yang
The mixing process of fuel and oxidizer is a very critical factor affecting the real operating performance of non-premixed rotating detonation combustor. In this paper, a two-dimensional numerical study is carried out to investigate the flow and mixing characteristics of CH4/air in combustor with different injection structures. On this basis, the effect of CH4/air mixing on the critical ignition energy for forming detonation is theoretically analyzed in detail. The numerical results indicate that injection strategies of CH4 and air can obviously affect the flow filed characteristic, pressure loss, mixing uniformity and local equivalence ratio in combustor, which further affect the critical ignition energy for forming detonation. In the study for three different mass flow rates (the mass flow rates of air are 12.01 kg/s,8.58 kg/s and 1.72 kg/s, respectively), when air is radially injected into combustor (fuel/air are injected perpendicular to each other), although the mixing quality of CH4 and air is improved, the total pressure loss is also increased. In addition, the comparative analysis also shows that the increase of mass flow rate of CH4/air can decrease the difference of the critical ignition energy for forming detonation at a constant total equivalence ratio. The ignition energy decreases with the decrease of the total flow rate and then increases gradually.