With the accelerated melting of the Arctic sea ice, the opening of the Northern Sea Route (NSR) of the Arctic is becoming increasingly accessible. The purpose of this paper was to examine the impact of uncertainty in sea ice thickness (SIT) data on the opening of the NSR and to quantify the extent of this impact, which is essential to the regularized operation of polar shipping. A quantitative assessment framework was proposed to examine the influence of SIT data uncertainty on navigational uncertainty through three aspects: the navigational spatiotemporal windows, the distribution of safe sailing speeds, and the uncertainty in optimal route planning by employing four distinct SIT datasets. Furthermore, the sensitivity of navigational spatiotemporal windows, the distribution of safe sailing speeds, and route planning to variations in SIT were also evaluated. Results show that experiment results based on CS2SMOS exhibit a more aggressive profile, while results based on CPOM are more conservative. The difference in SIT data has a significant impact on the proportion of operations subject to special consideration areas, such as safety speed, sailing time, and distance in NEP. A 0.1 m discrepancy in sea ice thickness data results in an approximate 0.067 change in the proportion of operations within special consideration areas. This discrepancy also leads to an approximate speed change of 0.89 knots, a navigation duration change of approximately 4 days, and a distance change of 152 km within specified limits.
Currently, most wave observation equipment is used for fixed-point measurements, and there is a relative scarcity of ship-borne real-time wave measurement devices, which limits comprehensive and three-dimensional monitoring of wave characteristics. This paper introduces the Wave Acquisition Stereo System (WASS) and describes the design and construction of a ship-borne stereoscopic vision experimental apparatus. Sea trials were conducted to evaluate the system’s ship-borne wave-measurement performance and to quantify the effect of deployment parameters on accuracy. The results indicate that the device reliably retrieves wave parameters; compared with concurrent buoy observations, the error in significant wave height did not exceed 0.14 m. Research confirms that deployment parameters have a significant impact on measurement outcomes: sampling frequency directly affects the accuracy of wave-parameter estimation; a higher sampling rate (10 Hz) improves the reliability of the calculated results. The baseline-to-height ratio has an optimal range (0.1–0.3), and values outside this interval reduce measurement accuracy. Under a fixed geometric configuration, the observation field exhibits a band-shaped low-error zone aligned with the baseline direction.