The resource utilization of CO is one of the essential avenues to realize the goal of “double carbon”. The metal–organic framework (MOF) has shown promising applications in CO catalytic reduction reactions due to its sufficient pore structure, abundant active sites and functionalizability. In this paper, we investigated the electrocatalytic carbon dioxide reduction reactions of single-atom catalysts created by MOF two-dimensional coordination network materials constructed from transition metal-tetrahydroxybenzoquinone using density function theory calculations. The results indicate that for 10 transition metals, TM-THQ single levels ranging from Sc to Zn, the metal atom binding energy to the THQ is large enough to allow the metal atoms to be stably dispersed in the THQ monolayer. The Ni-THQ catalyst does not compete with the HER reaction in an electrocatalytic CO reduction. The primary product of reduction for Sc-THQ is HCOOH, but the major product of Co-THQ is HCHO. The main product of Cu-THQ is CO, while the main product of six catalysts, Ti, V, Cr, Mn, Fe, and Zn, is CH. The limit potential and overpotential of Ti-THQ are the highest, 1.043 V and 1.212 V, respectively. The overpotentials of the other monolayer catalysts ranged from 0.172 to 0.952 V, and they were all relatively low. Therefore, we forecast that the TM-HQ monolayer will show powerful activity in electrocatalytic carbon dioxide reduction, making it a prospective electrocatalyst for carbon dioxide reduction.
Electrocatalytic reduction of CO2 to valuable fuels and chemicals can not only alleviate the energy crisis but also improve the atmospheric environment. The key is to develop electrocatalysts that are extremely stable, efficient, selective, and reasonably priced. In this study, spin-polarized density function theory (DFT) calculations were used to comprehensively examine the catalytic efficacy of transition metal-hexaaminobenzene (TM-HAB) monolayers as single-atom catalysts for the electroreduction of CO2. In the modified two-dimensional TM-HAB monolayer, our findings demonstrate that the binding of individual metal atoms to HAB can be strong enough for the atoms to be evenly disseminated and immobilized. In light of the conflicting hydrogen evolution processes, TM-HAB effectively inhibits hydrogen evolution. CH4 dominates the reduction byproducts of Sc, Ti, V, Cr, and Cu. HCOOH makes up the majority of Zn’s reduction products. Co’s primary reduction products are CH3OH and CH4, whereas Mn and Fe’s primary reduction products are HCHO, CH3OH, and CH4. Among these, the Ti-HAB reduction products have a 1.14 eV limiting potential and a 1.31 V overpotential. The other monolayers have relatively low overpotentials between 0.01 V and 0.7 V; therefore, we predict that TM-HAB monolayers will exhibit strong catalytic activity in the electrocatalytic reduction of CO2, making them promising electrocatalysts for CO2 reduction.
Carbon dioxide reduction technology can solve the shortage of resources and climate issues like “warming of the planet”. Metal–organic frameworks (MOFs) contain well-defined active sites, a huge specific surface, and a robust porous structure, making them a good candidate for use in CO2 electrocatalytic reduction. Using the principles of spin-polarization density functional theory, the two-dimensional MOF constructed from transition metal–hexaiminotriphenylene was calculated to reduce CO2 electrocatalytically. The results show that for ten transition metal (TM-HITP) two-dimensional network structures spanning Sc through Zn, the formation energies Ef are all negative, and they can theoretically be synthesised experimentally, and the metal atoms can be disseminated in the HITP framework steadily because their binding energies to HITP are highly sufficient. Considering the competition with the HER, all catalysts showed CO2RR selectivity except Co-HITP. Co-HITP catalysts required pH >7.22 to show CO2RR selectivity. The main products and overpotentials of both Fe and Co catalysts were in agreement with the available literature values, indicating that the calculations were reliable. HCOOH is the primary product for Sc, Ni, and Cu. The principal product of Ti and V is CH4. CH3OH is the primary product for Cr, Fe, and Co. The product selectivity of Mn was poor and three products, CH4, HCHO and HCOOH, were obtained simultaneously at the same limiting potential. The limiting potentials of these ten catalysts for electrocatalytic CO2 reduction ranged from 0.296 to 0.738 volts and the overpotentials between 0.027 V and 0.754 V, all of which were rather little. Consequently, we forecast that the two-dimensional MOFs constructed with transition metals with hexaiminotriphenylene are potential electrocatalysts for CO2 reduction because they demonstrate excellent catalytic activity in the electrocatalytic reduction of CO2.
Calculations of first principles were employed to explore the elastic constants of the -Mg17Al12 intermetallic complex under pressure, along with several related physical parameters, including the bulk modulus, the shear modulus, Young’s modulus, Poisson’s ratio, and the anisotropy index. The volume of the -MgAl crystal in the ground state was V0 = 1180.353 Å, and the lattice parameter was 10.57 Å. This is in agreement with the available results in the literature, which indicate that the calculations were correct. The three independent elastic constants, C11, C12, and C44, increased with increasing pressure. The bulk modulus B, shear modulus G, and Young’s modulus E increased with increasing pressure, indicating that the bulk deformation resistance, shear deformation resistance, and stiffness of the -MgAl phase increased with increasing pressure. The phase had a > 1.75 and a Poisson’s ratio of > 0.26 and increased with pressure, indicating that the -MgAl crystals were ductile and that the ductility increased with pressure. The Cauchy pressure C–C increased with increasing pressure. The anisotropy coefficients A and A deviated further from 1, and the anisotropy increased. The electronic structure calculations showed that the total density of the states (TDOS) was achieved mainly by the Mg-3p and Al-3p states, and the total density of states moved toward the higher energy regions under pressure, with enhanced interatomic bonding, leading to an increase in the elastic constants and ultimately to an increase in each physical property with increasing pressure.
This study employs first-principles calculations to examine structural, elastic, and mechanistic relationships of Mg2Ni alloys under varying conditions of pressure. The investigation encompasses Young’s modulus, bulk modulus, shear modulus, Poisson’s ratio, and anisotropy index, as well as sound velocity, Debye temperature, and related properties. Our findings indicate that the lattice parameters of Mg2Ni in its ground state are in agreement with values obtained experimentally and from the literature, confirming the reliability of the calculated results. Furthermore, a gradual decrease in the values of the lattice parameters and is observed with increasing pressure. Specifically, the values for and decrease at a hydrostatic pressure of 5 GPa, while and increase when the external hydrostatic pressure exceeds 5 GPa. All other elastic constants exhibit a consistent increasing trend with increasing pressure between 0 and 30 GPa, with and increasing at a faster rate than and . In the 0–30 GPa pressure range, Mg2Ni satisfies the mechanical stability criterion, indicating its stable existence under these conditions. Additionally, the Poisson’s ratio of Mg2Ni consistently exceeds 0.26 over a range of pressures from 0 to 30 GPa, signifying ductility and demonstrating consistency with the value of . The hardness of Mg2Ni increases within the pressure range of 0–5 GPa, but decreases above 5 GPa. Notably, the shear anisotropy of Mg2Ni exhibits greater significance than the compressive anisotropy, with its anisotropy intensifying under higher pressures. Both the sound anisotropy and the Debye temperature of Mg2Ni demonstrate an increasing trend with rising pressure.
This study systematically investigates the effect of substituting Copper (Cu) with Nickel (Ni) on the glass-forming ability (GFA) and corrosion resistance of a Pt-based bulk metallic glass (BMG). We demonstrate that a minor substitution of 5 at.% Ni for Cu in the Pt40Pd20Cu20P20 base alloy significantly enhances both properties. The GFA is markedly improved, as evidenced by the supercooled liquid region (ΔTx) widening from 68 K to 91 K. The optimized Pt40Pd20Cu15Ni5P20 alloy exhibits a compressive fracture strength of 1.38 GPa. Electrochemical tests in a 3.5 wt.% NaCl solution reveal a substantial improvement in corrosion resistance. Compared to the Ni-free baseline alloy, the passive film resistance (Rf) and charge-transfer resistance (Rct) of the Ni-containing alloy are enhanced by factors of 2.75 and 2.60, respectively. This superior performance is attributed to a synergistic effect wherein Ni alloying both stabilizes the amorphous structure and promotes the formation of a more robust passive film. This work presents a viable strategy for designing cost-effective, high-performance multi-component BMGs for applications in aggressive chloride environments.