The Tight Sand Reservoir Characteristics and Gas Source in Coal Measures: A Case Study of Typical Areas in China: Interbedded sandstones, shales, and coal seams were formed in marine-continental transitional environments of coal measures, and the gas source of its tight sand gas has been uncertain, which hinders the progress of natural gas exploration. This article uses the Longtan tight sand gas in west Guizhou as an example to investigate the reservoir features, gas charging history, and main source rock of tight sand gas by examining thin sections, scanning electron microscopy images, X-ray diffraction results, and the fluid inclusions with burial and thermal histories and noble gas analysis. The Longtan sandstones in this study are classified as litharenites which are characterized by low compositional and textural maturities, and high clay contents, and are distinguished petrographically from conventional sandstones by the extensive existence of micropores and microfractures. The results of the homogenization temperatures of the fluid inclusions show that the Longtan tight sand gas is a single-stage accumulation which occurred during the Late Triassic. Furthermore, through the analysis of the helium and argon isotopes of noble gases, a calculation model was established for determining the shale and coal contributions to the tight sand gas. The research results show that the Longtan tight sand gas mainly belongs to the crust-derived gas, mostly from the Longtan shale-derived contribution and to a lesser extent from the Longtan coal-derived contribution. The measured 40Ar/36Ar values of the Longtan shales and coals are consistent with the forecasted 40Ar/36Ar values from the calculation model, demonstrating that the model is viable to calculate the source rock contribution to the tight sand gas. Therefore, the Longtan shales as main source rocks can generate hydrocarbons to charge neighboring tight sandstones to form tight gas accumulation in the Longtan Formation, which provides an opportunity for tight gas development in west Guizhou.
The development of fractures under multiple geological tectonic movements affects the occurrence and efficient production of free gas in deep coal reservoirs. Taking the No.8 deep coal seam of the Benxi formation in the Linxing area as the object, a method for evaluating favorable fracture areas is established based on the combination of field joint staging, paleogeological model reconstruction under structural leveling, finite element numerical simulation, and fracture development criteria. The results show that a large number of shear fractures and fewer tensile joints are developed in the Benxi formation in the field and mainly formed in the Yanshanian and Himalayan periods. The dominant strikes of conjugate joints in the Yanshanian period are NWW (100°~140°) and NNW (150°~175°), with the maximum principal stress magnitude being 160 MPa along the NW orientation. Those in the Himalayan period are in the NNE direction (0°~40°) and the EW direction (80°~110°), with the maximum principal stress magnitude being 100 MPa along the NE orientation. The magnitudes of the maximum principal stress of the No. 8 deep coal seam in the Yanshanian period are between −55 and −82 MPa, indicative of compression; those in the Himalayan period are from −34 to −70 MPa in the compressive stress form. Areas with high shear stress values are mainly distributed in the central magmatic rock uplift, indicating the influence of magmatic rock uplift on in situ stress distribution and fracture development. Based on the comprehensive evaluation factors of fractures, the reservoir is divided into five classes and 24 favorable fracture areas. Fractures in Class I areas and Class II areas are relatively well developed and were formed under two periods of tectonic movements. The method for evaluating favorable fracture areas is not only significant for the prediction of fractures and free gas contents in this deep coal reservoir but also has certain reference value for other reservoirs.