Electrochemical water splitting is a common way to produce hydrogen gas, but the sluggish kinetics of the oxygen evolution reaction (OER) significantly limits the overall energy conversion efficiency of water splitting. In this work, a highly active and stable, meso–macro hierarchical porous Ni₃S₄ architecture, enriched in Ni³⁺ is designed as an advanced electrocatalyst for OER. The obtained Ni₃S₄ architectures exhibit a relatively low overpotential of 257 mV at 10 mA cm⁻² and 300 mV at 50 mA cm⁻². Additionally, this Ni₃S₄ catalyst has excellent long‐term stability (no degradation after 300 h at 50 mA cm⁻²). The outstanding OER performance is due to the high concentration of Ni³⁺ and the meso–macro hierarchical porous structure. The presence of Ni³⁺ enhances the chemisorption of OH⁻, which facilitates electron transfer to the surface during OER. The hierarchical porosity increases the number of exposed active sites, and facilitates mass transport. A water‐splitting electrolyzer using the prepared Ni₃S₄ as the anode catalyst and Pt/C as the cathode catalyst achieves a low cell voltage of 1.51 V at 10 mA cm⁻². Therefore, this work provides a new strategy for the rational design of highly active OER electrocatalysts with high valence Ni³⁺ and hierarchical porous architectures.

This review presents the recent developments of electrodeposited MOF films and their corresponding applications in different areas.

Innovative bimetallic MOFs offer more possibilities to further tailor the properties of MOFs, which have attracted great attention for wide applications. However, it is still a great challenge to rationally design bimetallic MOFs due to the lack of a tunable and reasonable hybrid structure architecture. Herein, a new series of bimetallic metal–organic frameworks (MOFs) with tunable pillar linkers were prepared by a one-step synthesis method. These bimetallic MOFs retain the same crystal structure when the mole fraction (based on metal) of the two metals changes from 0 to 1 and both metal ions occupy random nodal positions. The incorporation of a second metal cation has a large influence on the intrinsic properties (e.g. thermal stabilities and band gaps) of the MOFs. Furthermore, these bimetallic MOFs were used as self-sacrificial templates to prepare bimetal oxide catalysts for the oxygen evolution reaction (OER). After pyrolysis, a porous and hierarchical honeycomb-like structure with carbon network covered (bi)metal oxides is formed. Among all the bimetallic MOF-derived catalysts, CoNi1@C showed the best performance for the OER with the lowest Tafel slopes (55.6 mV dec⁻¹) and overpotentials (335 mV on a glassy carbon electrode and 276 mV on Ni foam) at a current density of 10 mA cm⁻², which is higher than those of state-of-the-art Co–Ni mixed oxide catalysts derived from MOFs for the OER. Our results indicate that the incorporation of a second metal ion is a promising strategy to tailor the properties of MOFs. More importantly, this new bimetallic MOF family with tunable linkers is expected to serve as a flexible assembly platform to offer broad possibilities for practical applications of MOFs.

Lithium–sulfur (Li–S) batteries have received widespread attention, and lean electrolyte Li–S batteries have attracted additional interest because of their higher energy densities. This review systematically analyzes the effect of the electrolyte-to-sulfur (E/S) ratios on battery energy density and the challenges for sulfur reduction reactions (SRR) under lean electrolyte conditions. Accordingly, we review the use of various polar transition metal sulfur hosts as corresponding solutions to facilitate SRR kinetics at low E/S ratios (< 10 µL mg⁻¹), and the strengths and limitations of different transition metal compounds are presented and discussed from a fundamental perspective. Subsequently, three promising strategies for sulfur hosts that act as anchors and catalysts are proposed to boost lean electrolyte Li–S battery performance. Finally, an outlook is provided to guide future research on high energy density Li–S batteries. Graphical

A highly ordered mesoporous NiS_x/nitrogen-doped mesoporous carbon (NiS_x/NMC) nanohybrid as a bifunctional oxygen electrocatalyst for rechargeable Zn–air batteries.